Search result: GB/T 3195-2023 (GB/T 3195-2016 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3195-2023 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Aluminium and aluminium alloys drawn(rolled) round wire
| Valid |
GB/T 3195-2023
|
| GB/T 3195-2016 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Aluminum and aluminum alloys drawn round wires
| Obsolete |
GB/T 3195-2016
|
| GB/T 3195-2008 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Aluminium and aluminium alloys drawn round wire
| Obsolete |
GB/T 3195-2008
|
| GB/T 3195-1997 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Aluminium wires for electric conduction purporse
| Obsolete |
GB/T 3195-1997
|
| GB 3195-1982 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Aluminum wires for electric conduction purpose
| Obsolete |
GB 3195-1982
|
| Standard ID | GB/T 3195-2023 (GB/T3195-2023) | | Description (Translated English) | Aluminium and aluminium alloys drawn��rolled��round wire | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H61 | | Classification of International Standard | 77.150.10 | | Word Count Estimation | 24,262 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-06-01 | | Older Standard (superseded by this standard) | GB/T 3195-2016 | | Drafting Organization | Hangzhou Kunli Welding Materials Co., Ltd., Northeast Light Alloy Co., Ltd., Jiangxi University of Science and Technology, Nonferrous Metals Technology and Economic Research Institute Co., Ltd., Beijing Nonferrous Metals and Rare Earth Application Research Institute Co., Ltd., Youyan Engineering Technology Research Institute Co., Ltd., China Qingdao Sifang Rolling Stock Co., Ltd., Northwest Aluminum Co., Ltd., Chinalco Materials Application Research Institute Co., Ltd., Dongliang Aluminum Co., Ltd. | | Administrative Organization | National Nonferrous Metals Standardization Technical Committee (SAC/TC 243) | | Proposing organization | China Nonferrous Metals Industry Association | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 3195-2023: Aluminum and aluminum alloy drawn (rolled) round wire rods
ICS 77:150:10
CCSH61
National Standards of People's Republic of China
Replace GB/T 3195-2016
Aluminum and aluminum alloy drawn (rolled) round wire rods
Published on 2023-11-27
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Preface
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB/T 3195-2016 "Aluminum and Aluminum Alloy Drawn Round Wire Rods": Compared with GB/T 3195-2016, except for structural adjustments
In addition to editorial changes, the main technical changes are as follows:
a) 2A01T4, 2A04T4, 2B11T4, 2B12T4, 2A10T4, 2B16T6, 2024O,
2024H13, 2117O, 2117H13, 2219O, 2219H13, 3003O, 3003H14, 5005O, 5052O, 6061O,
6061T6, 7A03T6, 7050O, 7050T7 brand status, added 5056H32, 2B16H14, rivet wire
5356O, 5356H32, 7C04H18, 7075H13 brand status, changed the diameter of the wire for rivets (see 4:1,:2016
version 3:1:1:4);
b) Delete the 1350O, 1350H12, 1350H22, 1350H14, 1350H24, 1350H16, and 1350H26 brands for conductor wires
No: status, the diameter of the conductor wire has been changed (see 4:1, 3:1:1:2 of the:2016 version);
c) Delete the 2A14O, 2A14H12, 2A14H14, and 2A14H18 brand status of welding wire, and add welding wire
2S19, 2319, 4047A, 4145, 4S03, 5E61, 5B71 grades and corresponding status, 4A47H18, 4A54H18 grade status
status, the diameter of the welding wire has been changed (see 4:1, 3:1:1:3 of the:2016 version);
d) Deleted the wire material for cable braiding (see 3:1:1:5 of the:2016 edition);
e) The grade of wire used for coating has been changed and the Al99:999 grade status has been added (see 4:1, 3:1:1:6 of the:2016 edition);
f) Changed the requirements for chemical composition, hydrogen content, diameter deviation, room temperature tensile mechanical properties, shear strength, riveting performance, and resistivity:
Seek (see Chapter 5, 3:2, 3:3, 3:4, 3:5, 3:7, 3:10 of the:2016 edition);
g) Deleted stress corrosion resistance (see 3:11 of the:2016 edition);
h) Changed the requirements for test methods (see Chapter 6, Chapter 4 of the:2016 edition);
i) The inspection items and sampling requirements have been changed (see 7:4 and 7:5, 5:4 and 5:5 of the:2016 edition):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by the China Nonferrous Metals Industry Association:
This document is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243):
This document was drafted by: Hangzhou Kunli Welding Materials Co:, Ltd:, Northeast Light Alloy Co:, Ltd:, Jiangxi University of Science and Technology, Nonferrous Metals
Institute of Technology and Economics Co:, Ltd:, Beijing Nonferrous Metals and Rare Earth Application Research Institute Co:, Ltd:, Youyan Engineering Technology Research Institute Co:, Ltd:
Division, CRRC Qingdao Sifang Rolling Stock Co:, Ltd:, Northwest Aluminum Co:, Ltd:, Chinalco Materials Application Research Institute Co:, Ltd:, Dongliang
ALUMINUM LIMITED:
The main drafters of this document: Chen Jiqiang, Gao Xinyu, Deng Tongsheng, Fan Youhua, Li Zhihui, Sun Ziwei, Jiao Lei, Ren Simeng, Han Xiaohui,
Zhang Yijie, Xie Weijia, Yan Lizhen, Li Shuaizhen, Chen Weiting, Song Lingfeng:
The previous versions of this document and the documents it replaces are as follows:
---First published as GB/T 3195-1982 in 1982, first revised in:1997;
---In the second revision in:2008, GB/T 3196-2001 "Aluminum and Aluminum Alloy Wires for Rivets" and GB/T 3197-
Contents of:2001 "Aluminum and Aluminum Alloy Wires for Welding Rods";
---The third revision in:2016;
---This is the fourth revision:
Aluminum and aluminum alloy drawn (rolled) round wire rods
1 Scope
This document stipulates the product classification, technical requirements, test methods, inspection rules, marking, packaging,
Contents of transportation, storage and quality certificates and order orders (or contracts):
This document applies to the production and inspection of rivets, conductors, aluminum and aluminum alloy round wires for welding and coating (hereinafter referred to as "wires"):
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 238 Test method for repeated bending of metallic material wires
GB/T 2651 Tensile test method for welded joints
GB/T 2653 Bending test method for welded joints
GB/T 3048:2 Test methods for electrical properties of wires and cables Part 2: Resistivity test of metallic materials
GB/T 3190 Chemical composition of deformed aluminum and aluminum alloys
GB/T 3199 Packaging, marking, transportation and storage of aluminum and aluminum alloy processed products
GB/T 3250 Test methods for shearing and riveting of wires and bars for aluminum and aluminum alloy rivets
GB/T 3323:1 Radiographic testing for non-destructive testing of welds Part 1: Film technology for X-ray and gamma rays
GB/T 3880:1 Aluminum and aluminum alloy plates and strips for general industrial use Part 1: General requirements
GB/T 3880:2 Aluminum and aluminum alloy plates and strips for general industrial use Part 2: Mechanical properties
GB/T 7999 Photoelectric direct reading emission spectrum analysis method for aluminum and aluminum alloys
GB/T 8005:1 Aluminum and aluminum alloy terminology Part 1: Products and processing techniques
GB/T 16865 Specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products
GB/T 17432 Sampling method for chemical composition analysis of deformed aluminum and aluminum alloys
GB/T 20975 (all parts) Chemical analysis methods for aluminum and aluminum alloys
GB/T 22087-2008 Guidelines for quality classification of arc welded joints of aluminum and aluminum alloys
GB/T 26492:5 Defects in deformed aluminum and aluminum alloy ingots and processed products Part 5: Defects in pipes, rods, profiles and wires
GB/T 42916 Aluminum and aluminum alloy product identification
YS/T 275 high purity aluminum ingot
YS/T 600 Liquid hydrogen measurement method for aluminum and aluminum alloys, closed loop method
3 Terms and definitions
The terms and definitions defined in GB/T 8005:1 and GB/T 26492:5 apply to this document:
......
GB/T 3195-2016
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.10
H 61
Replacing GB/T 3195-2008
Aluminum and aluminum alloys drawn round wires
ISSUED ON. OCTOBER 13, 2016
IMPLEMENTED ON. SEPTEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Requirements ... 6
4 Test methods ... 20
5 Inspection rules ... 22
6 Marks, packaging, transport, storage and quality certificate ... 25
7 Order (or contract) content ... 27
Annex A (Informative) Matching relationship between wire and aluminum alloy
material to be welded ... 28
Annex B (Normative) Welding performance requirements and test methods. 29
Foreword
This Standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard replaces GB/T 3195-2008 Aluminium and aluminium alloys
drawn round wire. Compared with GB/T 3195-2008, the main technical
modifications are as follows.
- added wire for cable weaving, wire for evaporating materials and
related requirements;
- added 8017, 8030, 8076, 8130, 8176, 8177, 8C05, 8C12, eight kinds of
conductor wires;
- added 2B16, 2017, 2117, 2024, 2219, 7050, six rivet wires;
- added 4043A, 4A47, 4A54, 5087, 5183A, 5356A, six welding wires;
- added 5154, 5154A, 5154C, three wires for weaving cable;
- added Al-Si1 evaporation wire;
- added welding performance of welding wire, mechanical properties of
deposited metal and coil requirements for plate delivery;
- added normative Annex B Welding performance requirements and test
methods;
- modified dimensional tolerance of welding wire;
- modified the content of normative references;
- deleted requirements for volume conductivity of conductor wire.
This Standard was proposed by China Nonferrous Metals Industry
Association.
This Standard shall be under the jurisdiction of National Technical Committee
on Nonferrous Metals of Standardization Administration of China (SAC/TC
243).
Main drafting organizations of this Standard. General (Tianjin) Aluminum
Products Co., Ltd., Northeast Light Alloy Co., Ltd., Nonferrous Metals
Technology and Economic Research Institute, Hangzhou Kunli Welding
Materials Co., Ltd., Beijing Institute of Nonferrous Metals and Rare Earth
Applications, Longkou Jungle Aluminum Co., Ltd., Beijing Aeronautical
Materials Research Institute, Southwest Aluminum (Group) Co., Ltd.
Aluminum and aluminum alloys drawn round wires
1 Scope
This Standard specifies the requirements, test methods, inspection rules and
marks, packaging, shipping, storage and quality certificate and order (or
contract) of aluminum and aluminum alloys drawn round wires.
This Standard is applicable to aluminum and aluminum alloy wires for
conductor, welding, rivet, cable weaving and evaporating material (hereinafter
referred to as wire).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 238, Metallic materials - Wire - Reverse bend test
GB/T 2651, Method of tensile test for welded joint
GB/T 2652, Methods of tensile tests for weld and deposited metal
GB/T 2653, Methods of bend and compression tests for welded joint
GB/T 3048.2, Test methods for electrical properties of electric cables and
wires - Part 2. Test of electrical resistivity of metallic materials
GB/T 3190, Wrought aluminium and aluminium alloys--Chemical
composition limits
GB/T 3199, Wrought aluminium and aluminium alloy products-Packing,
marking, transporting and storing
GB/T 3250, Aluminium and aluminium alloys shear test method for rivet
wire and rivets and riveting test method for rivet wire
GB/T 3323, Methods for radiographic inspection and classification of
radiographs for fusion welded butt joints in steel
GB/T 3880.1, Wrought aluminium and aluminium alloy plates, sheets and
3.1.2 Marks and examples
The mark of the wire is expressed in terms of product name, standard number,
designation, supply state, diameter. The marking examples are as follows.
Example 1.
the conductor wire of which the designation is 1350, the state is H14, the
diameter is Φ10.0 mm is marked as.
conductor wire GB/T 3195-1350H14-Φ10.0
Example 2.
the welding wire of which the designation is 5A06, the state is H14, the
diameter is Φ10.0 mm is marked as.
welding wire GB/T 3195-5A06H14-Φ10.0
Example 3.
the rivet wire of which the designation is 5A02, the state is H14, the diameter
is Φ10.0 mm is marked as.
rivet wire GB/T 3195-5A02H14-Φ10.0
Example 4.
the cable weaving wire of which the designation is 5154A, the state is H38,
the diameter is Φ0.4 mm is marked as.
cable weaving wire GB/T 3195-5154AH38-Φ0.4
Example 5.
the evaporating material wire of which the designation is Al-Si1, the state is
H14, the diameter is Φ2.0 mm is marked as.
evaporating material wire GB/T 3195- Al-Si1H14-Φ2.0
3.2 Chemical composition
The chemical composition of 4A7, 4A54, 5087, 5154C, 5183A, 5356A, 8017,
8030, 8076, 8130, 8176, 8177, 8C05, 8C12, Al-Si1 wires shall comply with
the provisions of Table 6. The chemical composition of other designation of
wire shall also comply with the provisions of GB/T 3190.
specified in the "Al" and "other impurities" columns in Table 6 are subjected to
conventional chemical analysis. When it is suspected that the mass fraction
of the unconventional analysis element exceeds the limits of this Standard,
the supplier shall analyze these elements.
4.1.3 "Al" content is calculated according to the method specified in GB/T
3190. When calculating the "Al" content, the sum of the values of the
elemental analysis and the value of the unconventional analysis element shall
be considered as the sum of the "elemental content".
4.1.4 The numerical method is used to determine the numerical value. The
numerical rounding rules shall be in accordance with the relevant provisions
of GB/T 8170. The rounding digits shall be the same as the limit digits
specified in Table 6 of this Standard or GB/T 3190.
4.2 Hydrogen content
The detection method of wire hydrogen content shall be in accordance with
the method specified in YS/T 600.
4.3 Diameter deviation
The diameter deviation of the wire shall be measured with a measuring tool
with a precision of not less than 0.01 mm.
4.4 Mechanical properties
Test method of tensile strength of wire at room temperature shall be carried
out according to the method specified in GB/T 16865.
4.5 Bending resistance
The bending resistance test method of wire shall be carried out according to
the method specified in GB/T 238.
4.6 Resistivity
The resistivity test method of the wire shall be carried out according to the
method stipulated in GB/T 3048.2.
4.7 Welding performance
The welding performance of the wire shall be tested in accordance with the
method specified in Annex B.
4.8 Mechanical properties of deposited metal
4.8.1 Prepare the welding test plate according to the method specified in
B.2 of Annex B. The thickness of motherboard for welding test plate is 14mm
~ 20mm. The root gap is 6mm ~ 10mm.
4.8.2 Extract a sample for deposited metal tensile test according to the
method specified in GB/T 2652. Carry out the deposited metal tensile test in
accordance with the method specified in GB/T 2652.
4.9 Shear strength, riveting performance
The test methods for wire shear strength, riveting performance shall be in
accordance with the method specified in GB/T 3250.
4.10 Stress corrosion resistance
The electrical conductivity test method of the stress corrosion resistance of
the wire shall be carried out according to the method specified in GB/T 12966.
4.11 Appearance quality
In the natural scattered light, carry out the visual inspection for appearance
quality. If necessary, it can use the size measurement tool to define the size of
the defect. The depth of the defect can be determined by grinding.
4.12 Reel
The wire size deviation of welding wire is measured with a measuring tool that
ensures the corresponding accuracy. Other items shall be visually inspected.
5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The wire shall be inspected by the supplier to ensure that the quality of
the wire meets the requirements of this Standard and the order (or contract).
Fill the quality certificate.
5.1.2 The purchaser shall inspect the received wire according to the
provisions of this Standard. When the inspection results are inconsistent with
the provisions of this Standard and the order (or contract), it shall be made in
written form to the supplier and solved via negotiation between both parties.
Any objection to the appearance quality or diameter deviation shall be made
within one month from the date of receipt of the wire. Other objections shall
be made within three months f...
......
GB/T 3195-2008
Aluminium and aluminium alloys drawn round wire
ICS 77.150.10
H61
National Standards of People's Republic of China
Replacing GB/T 3195-1997, GB/T 3196 ~ 3197-2001
Aluminum and aluminum wire drawing round
Posted 2008-06-17
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard reference ASTMB230/B230M-99 "1350-H19 aluminum for electrical purposes", ASTMB233-97 "electrical drawing 1350
Line blank ", ASTMB316/B316M-02" aluminum and aluminum rivets and cold heading wire, rod ", EN1301-3.1997" aluminum and aluminum alloy pull
Wire system Part 3. size deviation "and other standards, GB/T 3195-1997, GB/T 3196-2001, GB/T 3197-2001 three
Integration criteria revision.
This standard replaces GB/T 3195-1997 "with conductive aluminum", GB/T 3196-2001 "rivets, aluminum and aluminum alloy wire"
GB/T 3197-2001 "aluminum and aluminum alloy welding wire."
This standard and GB/T 3195-1997, GB/T 3196-2001, GB/T 3197-2001 compared to the main carried out in the following areas
Changes and additions.
--- 1350 brands size deviation, mechanical properties, electrical conductivity of the reference volume using ASTMB230/B230M-99, ASTMB
233-97 standard;
--- 3003,6061,5005,5052,5056 grades dimensional variations, the mechanical properties of reference adopted ASTMB316/B316M-02
standard;
--- Increasing the volume conductivity conductor wire;
--- Increasing the weight of the aluminum plate, a single aluminum by weight.
The standard proposed by China Nonferrous Metals Industry Association.
This standard Nonferrous Metals by the National Standardization Technical Committee.
This standard is drafted by. Northeast Light Alloy limited liability company.
Participated in the drafting of this standard. aluminum aluminum Northwest Branch, Southwest Aluminum (Group) Co., Ltd., Hangzhou Feixiang Electronic Wire & Cable
Industrial Co., Ltd.
The main drafters of this standard. Left Hong Qing, Song Wei, Lv Xinyu, Guo Rui, Geli Xin, Liu research at Lily, TRADITIONIS Yang Chunmei, Xie Xiaoxiang.
This standard replaces the standards previously issued as follows.
--- GB/T 3195-1982, GB/T 3195-1997;
--- GB/T 3196-1982, GB/T 3196-2001;
--- GB/T 3197-1982, GB/T 3197-2001.
Aluminum and aluminum wire drawing round
1 Scope
This standard specifies the aluminum and aluminum alloy drawn wire circle requirements, test methods, inspection rules, marking, packaging, transportation, storage and contract
(Or orders) content.
This standard applies to the conductor, rivets, aluminum and aluminum alloy welding products such as wire rod (hereinafter referred to as wire).
2 References
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228 metal materials at room temperature tensile test method
GB/T 238 metal wire repeated bending test method for materials
GB/T 3190 Wrought aluminum and aluminum alloy chemical composition
GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage
GB/T 3250 aluminum and aluminum alloy rivet wire and rivets Shear Test Method Test Method for riveting and rivet wire
GB/T 12966 Aluminum conductivity eddy current testing methods
GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method
GB/T 20975 (all parts), chemical analysis of aluminum and aluminum alloys
3 Requirements
3.1 Categories
3.1.1 wire grades, state, diameter, typical use in Table 1.
Table 1
Grade a state a diameter a/mm typical use
H18
H14
0.8 to 20.0
0.8 to 1.6
Electrode wire rod
> 1.6 to 3.0 with welding wire, rivets, wire rod
> 3.0 to 20.0 with a wire electrode
3.0 to 20.0 rod with wire, rivets, wire rod
1A50
H12b, H22b
H14, H24
H16, H26
H19
O, H19
9.5 to 25.0
1.2 to 6.5
0.8 to 20.0
Conductor wire
1050A, 1060,1070A, 1200
O, H18 0.8 ~ 20.0
H14 3.0 ~ 20.0
Electrode wire rod
......
|