HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 31301.4-2015 English PDF

US$1329.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31301.4-2015: Footwear manufacturing machines -- Safety requirements -- Part 4: Footwear moulding machines
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 31301.4-2015English1329 Add to Cart 10 days [Need to translate] Footwear manufacturing machines -- Safety requirements -- Part 4: Footwear moulding machines Valid GB/T 31301.4-2015

PDF similar to GB/T 31301.4-2015


Standard similar to GB/T 31301.4-2015

GB 19865   GB/T 31301.7   GB/T 31301.8   GB/T 31301.6   

Basic data

Standard ID GB/T 31301.4-2015 (GB/T31301.4-2015)
Description (Translated English) Footwear manufacturing machines -- Safety requirements -- Part 4: Footwear moulding machines
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y99
Classification of International Standard 61.060
Word Count Estimation 63,646
Date of Issue 2015-12-10
Date of Implementation 2016-07-01
Regulation (derived from) National Standard Announcement 2015 No.38
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 31301.4-2015: Footwear manufacturing machines -- Safety requirements -- Part 4: Footwear moulding machines


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Footwear manufacturing machines - Safety requirements - Part 4. Footwear moulding machines ICS 61.060 Y99 National Standards of People's Republic of China Shoe Machinery - Safety requirements Part 4. Footwear molding machine Part 4. Footwearmouldingmachines Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Safety requirements and/or protective measures 4 5 Safety requirements and/or protective measures to verify 25 6 29 use of information Appendix A (informative) a list of 32 major hazard Requirements 36 Appendix B (normative) guard Annex C (normative) interlocking guard system requirements 37 Requirements 41 Annex D (normative) trip device Appendix E (normative) manipulation device of claim 44 hands Annex F (normative) Hold - run control device requirements 45 Annex G (normative) pressure-sensitive pad (PSM) and a pressure-sensitive plate (PSF) of claim 47 Annex H (normative) clamping control requirements 48 Annex I (normative) requires 50 pairs of the fail-safe control system The control method Appendix J (normative) integrated manufacturing system related security guards suspended 51 Requirements Annex K (normative) with a control function guard (interlocking guard with a start function) 52 Annex L (normative) threshold temperature burns 53 Annex M (informative) Footwear molding machines - Noise test code 54 IMPORTANT Annex N (normative) integrated manufacturing system 57 References 59

Foreword

GB/T 31301 "shoe machinery safety requirements" intends divided into the following sections. --- Part 1. stretch to help machine; --- Part 2. nailing machine; --- Part 3. Machine sanding and polishing machines; --- Part 4. Footwear molding machines; --- Part 5. piece leather machine, trimming machine and cutting machine; This section GB/T Part of 431,301. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is proposed by the China National Light Industry Council. This part of the National Light Industry Machinery Standardization Technical Committee leather machinery Technical Committee (SAC/TC101/SC1) centralized. This section is drafted. Dongguan Hongtai Xin Machinery Co., Ltd., Dongguan Polytechnic, Guangzhou, the whole Ye Machinery Technology Co., The company, Jiaxing University, China Leather and Footwear Industry Research Institute. The main drafters of this section. Red Fang Tang, Guo Kai, Cao Hui-yuan, Liu Zheng, Liu Chuhui, Li Gang, Kong Peili.

Introduction

According to the provisions of GB/T 15706-2012, and this part belongs to the C standard. This part of the machinery involved and the danger range of hazardous situations and hazardous events covered are given in the scope of this section. When this C class standards with Class A or Class B standard standard shall not at the same time, with respect to Class C in accordance with this standard and design Manufacturing machines, give priority to this type C standard requirements. Shoe Machinery - Safety requirements Part 4. Footwear molding machine

1 Scope

This section GB/T 31301 specifies the structure of footwear molding machine, transportation, installation, commissioning, setting, teaching or process changeover, operation, Cleaning, maintenance, scrap, dismantling of the relevant safety requirements. This section contains the operator of the machine's intended use and foreseeable misuse arising All major hazards, hazardous situations and hazardous events (see Appendix A) and footwear machine-related. This section for the production of shoes and shoe accessories, footwear molding machine is suitable within the footwear industry, including. --- Even shoes molding machine (see Figure 1, Figure 2 and Figure 3); --- Single bottom molding machine accessories and shoes (see Fig. 4 to 10); --- Shoes and boots, the whole machine (see Figure 11). This section also applies to the above-mentioned machines used in other products outside of shoes and accessories, and the production of these products do not need to enter the machine Other changes outside mold line. This section also applies to the following additional equipment. spray device, injection device pouring device, nozzle cleaner, pulling rod, mold cleaning device Set, activation device, the preparation phase and post-treatment, and robotic equipment (see Figure N.1). This section does not apply to the following machines, except for shoes even molding or reaction molding. --- A fixed injection device and the fixed mold position (clamping device) molding machine; --- Measuring and mixing apparatus using a fixed and linear structure (formwork) activities workstation machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3766-2001 Hydraulic System General technical conditions GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements GB/T 7932-2003 General technical conditions of pneumatic systems GB/T 8196-2003 mechanical safety devices fixed and movable guards General requirements for the design and manufacture GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching element Electromechanical control Electrical circuit GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk reduced GB 16754-2008 Safety of machinery - Emergency stop design principles GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design GB/T 17454.1-2008 Safety of machinery - Part 1 - sensitive protective devices. pressure sensitive mats and pressure sensitive floors of design and testing General rule GB/T 17454.2-2008 Safety of machinery - Part 2 sensitive protective devices. pressure sensitive edges and pressure sensitive bars design and testing General GB 17888.1-2008 Safety of machinery into the machine stationary facilities - Part 1. enter a fixed means of access between two levels s Choice GB 17888.2-2008 Safety of machinery into the machine stationary facilities - Part 2. Working platforms and gangways GB/T 18153-2000 Safety of machinery - accessible surface temperature Ergonomics data to establish temperature limit values \u200b\u200bfor hot surfaces

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31301.4-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31301.4-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31301.4-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31301.4-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.