|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31210.2-2014: Green manufacturing -- Near dry cutting -- Part 2: Technical requirements for minimum quantity lubricating system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31210.2-2014 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Green manufacturing -- Near dry cutting -- Part 2: Technical requirements for minimum quantity lubricating system
| Valid |
GB/T 31210.2-2014
|
PDF similar to GB/T 31210.2-2014
Basic data | Standard ID | GB/T 31210.2-2014 (GB/T31210.2-2014) | | Description (Translated English) | Green manufacturing -- Near dry cutting -- Part 2: Technical requirements for minimum quantity lubricating system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J30 | | Classification of International Standard | 25.010 | | Word Count Estimation | 6,679 | | Date of Issue | 9/3/2014 | | Date of Implementation | 5/1/2015 | | Quoted Standard | GB/T 13384; GB/T 16769; GB/T 31210.1 | | Regulation (derived from) | People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the metal-cutting machine tools Asia dry cutting trace cooling lubricant (hereinafter referred to MQL) system components, the MQL system requirements and their packaging, installation and commissioning. This Standard is applicable | GB/T 31210.2-2014: Green manufacturing -- Near dry cutting -- Part 2: Technical requirements for minimum quantity lubricating system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Green manufacturing.Near dry cutting.Part 2. Technical requirements for minimum quantity lubricating system
ICS 25.010
J30
National Standards of People's Republic of China
Green Manufacturing - dry cutting
Part 2. Micro lubrication system technical requirements
Part 2. Technicalrequirementsforminimumquantitylubricatingsystem
Issued on. 2014-09-03
2015-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 31210 "green manufacturing sub-dry cutting" is divided into two parts.
--- Part 1. Common technical requirements;
--- Part 2. Micro lubrication system technical requirements.
This section GB/T Part of 231,210.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337) and focal points.
This part mainly drafted by. Chongqing University, Dongguan City, An Molin energy saving technology Co., Ltd., Shanghai Jin Zhao Energy Saving Technology Co.,
Secretary, CMC Productivity Promotion Center, Ningbo Reddy can Carburetor Co., Ltd., Jiangsu University of Science and Technology, Chongqing Narita cryogenic processing technology limited
the company.
The main drafters of this section. Tong Mingwei phosphorothioate Xiong Weiqiang, Wu Qidong, Xidao Yun, Han Jianmin, Ren Jialong.
Green Manufacturing - dry cutting
Part 2. Micro lubrication system technical requirements
1 Scope
GB/T 31210 provisions of this part of the metal-cutting machine tools - dry cutting trace cooling lubricant (hereinafter referred to MQL) Systems Group
Cheng, MQL system requirements and their packaging, installation and commissioning.
This section applies to metallic materials - dry cutting.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 16769 Metal Cutting Machine noise level measurement method
GB/T 31210.1 green manufacturing sub-dry cutting - Part 1. General technical requirements
3 Terms and Definitions
GB/T 31210.1 defined and the following terms and definitions apply to this document.
3.1
MQL system minimumquantitylubricatingsystem
Asian dry cutting, the combination of MQL and auxiliary facilities.
3.2
MQL nebulizer minimumquantitylubricatingatomizer
According to sub-dry cutting process requirements, for micro-lubricant supply and achieve atomization device.
Note. Including trace oil (liquid) nebulizer, dry powder injectors and injector by micro media precisely metered and the like.
3.3
Low temperature cold jet machine cryogeniccoldairblastjetmachine
The purification of air with a certain pressure dry gas stream temperature is lowered to below 0 ℃, and out of the spray equipment.
3.4
Sniper coldgun
By the direct cooling mode, the temperature of the air with a certain pressure is reduced to below 0 ℃, and out of the injection device.
4 MQL system classification and composition
4.1 Classification by cooling
MQL system by cooling the outside into the cold and inside cold type.
a) externally cooled MQL
Usually a separate injection components, mainly used for turning, milling substandard surface forming.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31210.2-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31210.2-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31210.2-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31210.2-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|