Search result: GB/T 3098.26-2021
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3098.26-2021 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
Mechanical properties of fasteners - Flat washers
| Valid |
GB/T 3098.26-2021
|
| Standard ID | GB/T 3098.26-2021 (GB/T3098.26-2021) | | Description (Translated English) | | | Sector / Industry | National Standard (Recommended) |
GB/T 3098:26-2021
Mechanical properties of fasteners -- Flat washers
ICS 21:060:30
CCSJ13
National Standards of People's Republic of China
Fastener Mechanical Properties Flat Washers
(ISO 898-3:2018, Fasteners-Mechanicalpropertiesoffastenersmadeofcarbon
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
Introduction III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Code 2
5 Marking System 2
6 Material 3
7 Mechanical and physical properties 4
8 Test method 4
8:1 Hardness test 4
8:2 Decarburization test 7
8:3 Carburizing test 9
8:4 Retempering test 9
9 signs 10
9:1 General 10
9:2 Flat washer marking 10
9:3 Packaging Marks 10
Appendix A (normative) Ductility test for flat washers of property class 380HV 11
Reference 13
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document is part 26 of GB/T 3098 "Mechanical Properties of Fasteners": GB/T 3098 has released the following parts:
--- GB/T 3098:1 Mechanical properties of fasteners Bolts, screws and studs;
---GB/T 3098:2 Mechanical properties of fasteners nuts;
---GB/T 3098:3 Mechanical properties of fasteners set screws;
---GB/T 3098:5 Mechanical properties of fasteners self-tapping screws;
--- GB/T 3098:6 Mechanical properties of fasteners Stainless steel bolts, screws and studs;
---GB/T 3098:7 Mechanical properties of fasteners self-extrusion screws;
---GB/T 3098:8 Mechanical properties of fasteners - bolted parts used at:200°C ~ 700°C;
---GB/T 3098:9 Mechanical properties of fasteners - effective torque profile steel lock nut;
---GB/T 3098:10 Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals;
---GB/T 3098:11 Mechanical properties of fasteners Self-drilling self-tapping screws;
---GB/T 3098:12 Mechanical properties of fasteners - nut conical guaranteed load test;
--- GB/T 3098:13 Mechanical properties of fasteners Torque test and breaking torque of bolts and screws Nominal diameter 1~10mm;
---GB/T 3098:14 Mechanical properties of fasteners nut reaming test;
---GB/T 3098:15 Stainless steel nuts for mechanical properties of fasteners;
---GB/T 3098:16 Mechanical properties of fasteners Stainless steel set screws;
--- GB/T 3098:17 Preload test parallel bearing surface method for hydrogen embrittlement test of mechanical properties of fasteners;
--- GB/T 3098:18 Blind rivet test method for mechanical properties of fasteners;
---GB/T 3098:19 Blind rivets for mechanical properties of fasteners;
---GB/T 3098:20 Mechanical properties of fasteners - Guaranteed torque of wing nuts;
---GB/T 3098:21 Stainless steel self-tapping screws for mechanical properties of fasteners;
---GB/T 3098:22 Mechanical properties of fasteners Fine-grained non-quenched and tempered steel bolts, screws and studs;
---GB/T 3098:23 Mechanical properties of fasteners M42~M72 bolts, screws and studs;
--- GB/T 3098:24 Fasteners Mechanical properties of stainless steel and nickel alloy bolts, screws, studs and nuts for high temperature;
---GB/T 3098:25 Fasteners Mechanical Properties Guide for Selection of Stainless Steel and Nickel Alloy Fasteners;
---GB/T 3098:26 Flat washers for mechanical properties of fasteners:
This document is revised and adopted ISO 898-3:2018 "Mechanical properties of fasteners carbon steel and alloy steel fasteners - Part 3: Specified properties, etc:
Grade Flat Washers":
The technical differences between this document and ISO 898-3:2018 and their reasons are as follows:
--- Replaced ISO 898-1 with the normatively quoted GB/T 3098:1 to adapt to the technical conditions of our country (see Chapter 1 and Table 1);
--- Replaced ISO 898-2 with the normatively cited GB/T 3098:2 to adapt to the technical conditions of our country (see Chapter 1 and Table 1);
--- Replaced ISO 10673 with the normatively cited GB/T 97:4 to adapt to my country's technical conditions (see Table 1);
--- Increase the hardness level of 140HV (see Chapters 5 to 8) to expand the use of flat washers;
--- Replaced ISO 10669 with the normatively cited GB/T 97:5 to adapt to my country's technical conditions (see Chapter 6);
--- Replaced ISO 10684 with the normatively cited GB/T 5267:3 to adapt to my country's technical conditions (see Chapter 6);
--- Replaced ISO 10644 with the normatively cited GB/T 9074:1 to adapt to my country's technical conditions (see Table 1, Chapter 6);
--- Replace ISO 6508-1 with the normatively quoted GB/T 230:1 to adapt to the technical conditions of our country (see 8:1:2:1);
--- Replaced ISO 6507-1 with the normatively cited GB/T 4340:1 to adapt to the technical conditions of our country (see 8:1:2:1 and
8:1:3:1);
---In the hardness test method, the reading requirement of "interval about 120°" is added (see 8:1:2:4) to ensure the uniformity of readings;
--- Replaced ISO 1891-4 with the normatively cited GB/T 3099:4 to adapt to the technical conditions of our country (see 9:3):
The following editorial changes have been made to this document:
--- In order to coordinate with existing standards, the standard name is changed to "Flat Washers for Mechanical Properties of Fasteners";
--- Incorporate the amendments to ISO 898-3:2018/Amd1:2020, the clauses involved are marked with vertical doubles in the outer margins
Line (‖) is marked;
--- Replace the international documents cited for information with Chinese documents;
--- Corrected the signs and symbols of performance grade 380HV gaskets (see Table 5):
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Fastener Standardization Technical Committee (SAC/TC85):
This document is drafted by: China Machinery Productivity Promotion Center, Suzhou Unico Fastener Co:, Ltd:, Jiashan Yongxin Fastener Co:, Ltd:, Shang
Haiqiu Ming Standard Parts Co:, Ltd:, Anhui Ningguo Dongbo Fastener Co:, Ltd:, Jinyi Industrial Co:, Ltd:, Shanghai Jiyou Standard Five High
Strength Fastener Co:, Ltd:, Shandong Gaoqiang Fastener Co:, Ltd:, Zhoushan 7412 Factory, Zhejiang Haili Co:, Ltd:, Shanghai Gaoqiang
Du Bolt Factory Co:, Ltd:, Hunan Feiwo New Energy Technology Co:, Ltd:, and Product Quality Supervision and Testing Center for General Parts of Machinery Industry:
This document is interpreted by the National Fastener Standardization Technical Committee:
introduction
Fasteners are the most commonly used basic mechanical parts, an indispensable part of the equipment manufacturing industry, and directly determine the major equipment:
and host product level, performance, quality and reliability: GB/T 3098 "Mechanical Properties of Fasteners" for the mechanical properties of different types of fasteners
Provisions are made respectively to provide a basis for the design, manufacture, acceptance inspection and use of fasteners: It is intended to be composed of 30 parts:
--- GB/T 3098:1 Mechanical properties of fasteners Bolts, screws and studs;
---GB/T 3098:2 Mechanical properties of fasteners nuts;
---GB/T 3098:3 Mechanical properties of fasteners set screws;
---GB/T 3098:5 Mechanical properties of fasteners self-tapping screws;
--- GB/T 3098:6 Mechanical properties of fasteners Stainless steel bolts, screws and studs;
---GB/T 3098:7 Mechanical properties of fasteners self-extrusion screws;
---GB/T 3098:8 Mechanical properties of fasteners - bolted parts used at:200°C ~ 700°C;
---GB/T 3098:9 Mechanical properties of fasteners - effective torque profile steel lock nut;
---GB/T 3098:10 Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals;
---GB/T 3098:11 Mechanical properties of fasteners Self-drilling self-tapping screws;
---GB/T 3098:12 Mechanical properties of fasteners - nut conical guaranteed load test;
--- GB/T 3098:13 Mechanical properties of fasteners Torque test and breaking torque of bolts and screws Nominal diameter 1~10mm;
---GB/T 3098:14 Mechanical properties of fasteners nut reaming test;
---GB/T 3098:15 Stainless steel nuts for mechanical properties of fasteners;
---GB/T 3098:16 Mechanical properties of fasteners Stainless steel set screws;
--- GB/T 3098:17 Preload test parallel bearing surface method for hydrogen embrittlement test of mechanical properties of fasteners;
--- GB/T 3098:18 Blind rivet test method for mechanical properties of fasteners;
---GB/T 3098:19 Blind rivets for mechanical properties of fasteners;
---GB/T 3098:20 Mechanical properties of fasteners - Guaranteed torque of wing nuts;
---GB/T 3098:21 Stainless steel self-tapping screws for mechanical properties of fasteners;
---GB/T 3098:22 Mechanical properties of fasteners Fine-grained non-quenched and tempered steel bolts, screws and studs;
---GB/T 3098:23 Mechanical properties of fasteners M42~M72 bolts, screws and studs;
--- GB/T 3098:24 Fasteners Mechanical properties of stainless steel and nickel alloy bolts, screws, studs and nuts for high temperature;
---GB/T 3098:25 Fasteners Mechanical Properties Guide for Selection of Stainless Steel and Nickel Alloy Fasteners;
---GB/T 3098:26 Flat washers for mechanical properties of fasteners;
--- Mechanical properties of fasteners Weathering steel fasteners (expected to be part 27);
--- Fastener mechanical properties stainless steel flat washers (expected to be part 28);
--- Mechanical properties of fasteners M42~M100 nuts (expected to be part 29):
GB/T 3098 has been transformed into ISO 898 series carbon steel and alloy steel fasteners mechanical properties, ISO 3506 series stainless steel fasteners machinery
performance, as well as the mechanical properties of self-tapping screws, self-extrusion screws, effective torque profile steel lock nuts, non-ferrous metal fasteners, self-drilling self-tapping screws, etc:
International standards; independently developed mechanical performance standards such as blind rivets, fine-grained non-quenched and tempered steel fasteners, M42~M72 external thread fasteners; included
Nut reaming test, parallel bearing surface method to check hydrogen embrittlement preload test, blind rivet test method, wing nut guaranteed torque and other test methods:
legal standards: Incorporating various materials, various types of product mechanical performance standards and related test method standards into the GB/T 3098 series
for use:
Fastener Mechanical Properties Flat Washers
1 Scope
This document specifies bolts, screws,
Mechanical and physical properties of flat washers for bolted connections of stud and nut combinations when tested at an ambient temperature of 10°C to 35°C:
Note 1: These types of flat washers can also be used with other fasteners, such as self-tapping screws:
When tested at an ambient temperature of 10°C to 35°C, flat washers complying with the requirements of this document are subject to high and/or low temperature
The stated mechanical and physical properties may not be maintained:
Note 2: The applicable operating temperature for flat washers that meet the requirements of this document is -50°C to 150°C: When the operating temperature exceeds -50℃~150℃, even high
When the temperature reaches 300 ℃, it is recommended that the user consult the relevant experts:
This document applies to flat washers and assemblies made of carbon steel or alloy steel with a thickness of 0:2mm~12mm that meet the following requirements
With flat washers:
--- Flat washers (with or without patterns, ribs or chamfers);
--- Square flat washer;
--- Square hole flat washer;
---Special-shaped flat washer:
This document does not specify the following performance requirements:
--- Corrosion resistance;
--- Solderability:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 97:4 flat washers for screw and washer assemblies (GB/T 97:4-2002, eqvISO 10673:1998)
GB/T 97:5 flat washers for self-tapping screws and washers assemblies (GB/T 97:5-2002, eqvISO 10669:1999)
GB/T 230:1 Rockwell hardness test of metallic materials Part 1: Test method (GB/T 230:1-2018, ISO 6508-1:
2016, MOD)
GB/T 3098:1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098:1-2010, ISO 898-1:2009,
MOD)
GB/T 3098:2 Fasteners Mechanical Properties Nuts (GB/T 3098:2-2015, ISO 898-2:2012, MOD)
GB/T 3099:4 Fasteners term control, inspection, delivery, receipt and quality (GB/T 3099:4-2021, ISO 1891-4:
2018, MOD)
GB/T 4340:1 Vickers Hardness Test for Metal Materials Part 1: Test Methods (GB/T 4340:1-2009, ISO 6507-1:
2005, MOD)
GB/T 5267:3 Hot-dip galvanized coating for fasteners (GB/T 5267:3-2008, ISO 10684:2004, IDT)
GB/T 9074:1 Bolts or screws and flat washers assemblies (GB/T 9074:1-2018, ISO 10644:2009, MOD)
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document:
......
|