|
US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30828-2014: Middle strength steel wire for prestressed concrete
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30828-2014 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Middle strength steel wire for prestressed concrete
| Valid |
GB/T 30828-2014
|
PDF similar to GB/T 30828-2014
Basic data | Standard ID | GB/T 30828-2014 (GB/T30828-2014) | | Description (Translated English) | Middle strength steel wire for prestressed concrete | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H49 | | Classification of International Standard | 77.140.15 | | Word Count Estimation | 17,125 | | Date of Issue | 6/24/2014 | | Date of Implementation | 4/1/2015 | | Quoted Standard | GB/T 2103; GB/T 4354; GB/T 21839; GB/T 24238; GB/T 24242.2; GB/T 24242.4; YB/T 081 | | Adopted Standard | JIS G3538-1994, NEQ | | Regulation (derived from) | National Standards Bulletin No. 14 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the intensity of prestressed concrete steel wire classification, size, shape, weight and tolerance, technical requirements, test methods, inspection rules and packaging, marking and quality certificate. This standard applies to pre | GB/T 30828-2014: Middle strength steel wire for prestressed concrete---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Middle strength steel wire for prestressed concrete
ICS 77.140.15
H49
National Standards of People's Republic of China
Tensile steel in prestressed concrete
Issued on. 2014-06-24
2015-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 classification code and mark 1
4.1 Category 1
4.2 Code 2
4.3 Example 2 mark
5 order contents 2
6 size, shape, weight and tolerances 2
6.1 nominal diameter and tolerance 2
6.2 weighs 4
6.3 inner diameter of 4
6.4 Delivery Status 5
6.5 weight deviation 5
7 5 Technical requirements
7.1 Designation and chemical composition 5
7.2 Manufacturing Method 5
7.3 Mechanical Properties 5
7.4 Surface quality 7
Straight wire of 7.5 7
Test Method 8 7
7 8.1 Surface Inspection
7 8.2 Dimensions test
8.3 weight per meter measuring 7
8.4 Tensile Test 8
8.5 8 repeated bending test
8 8.6 bending test
8.7 relaxation test 8
8.8 Numerical rounding 8
8 9 inspection rules
9.1 Delivery Inspection 8
9.2 eigenvalue test 9
10 packaging, labeling, quality certificate, transportation and storage 9
9 10.1 Packing
10.2 mark 10
10 10.3 Certificate of Quality
10.4 Transportation and storage 10
Appendix A (normative) eigenvalues \u200b\u200binspection rules 11
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard reference method using redrafted JISG3538-1994 "cold drawn steel wire for prestressed concrete" prepared with JISG3538-
1994 "cold drawn steel wire for prestressed concrete," the non-equivalent.
The standard in the appropriate diameter, dimensional tolerances and other aspects of JISG3538 a certain identity; but in terms of specifications, elongation, relaxation rate
According to the needs of the construction industry has been adjusted, and increases repeated bending test content.
The standard proposed by China Iron and Steel Association.
This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized.
This standard was drafted. China Metallurgical Construction Research Institute Co., Ltd., Tianjin Yinlong prestressed Materials Co., Ltd., Tianjin Metallurgical set
ZTE corporation Shengda Steel Co., Ltd., Metallurgical Industry Information Standards Institute, Rizhao Steel Holding Group Co., Ltd., Liaoning Tongda Building Material Industry
Ltd., Liuzhou OVM Machinery Co., Ltd.
The main drafters of this standard. Zhu Jianguo, Wang Hongru, Mary, Frank Bridge, Yu Yan, Xie heavy tiger, Yong, Wang Wenxi, Maoai Ju, Lin ol The
Wangling Jun, Zhang Baoju, Wangke Feng, Lee Boon Yang, Chiang Tung, Yu Zhi Liang, Chen Jie, Ren Cuiying, a Yin, Yang Guiyu.
Tensile steel in prestressed concrete
1 Scope
This standard specifies the intensity of prestressed concrete steel wire classification, size, shape, weight and tolerance, technical requirements, test side
Method, inspection rules and packaging, marking and quality certificate.
Stabilized heat This standard applies to prestressed concrete members with strength in the range of 650MPa ~ 1370MPa after cold working
Li wire.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2103 General provisions wire acceptance, packaging, marking and quality certificate
GB/T 4354 quality carbon steel hot rod
GB/T 21839 Test Method for prestressed concrete steel
GB/T 24238 and prestressed steel wire strand with a hot rod
GB/T 24242.2 silk non-alloy steel wire rod - Part 2. general purpose wire rod
GB/T 24242.4 silk non-alloy steel wire rod - Part 4. Special purpose wire rod
YB/T 081 value metallurgical technical standards and testing for rounding value determination principles
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
The strength of the spiral rib steel wire middlestrengthhelicalribwire
Hot rods in the drawing process by the rotating spiral mold to form a continuous spiral rib rules along the longitudinal direction of the surface of the wire
After the stabilization treatment of cold drawn wire.
3.2
The strength notch wire middlestrengthindentedwire
Hot rods after the drawing process, the scoring roll cold rolling along the longitudinal direction of the wire surface uniformly distributed on both sides have regularly spaced,
Three, four after the cold stabilization treatment indentation pull wire.
3.3
Deformed filaments changedwire
Steel wire spiral rib and scored collectively.
4 classification and labeling code
4.1 Classification
4.1.1 divided by the surface shape of the spiral rib steel wire and wire scoring categories.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30828-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 30828-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30828-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30828-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|