US$879.00 · In stock Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30405-2013: Tannery machines -- Reciprocating roller machines -- Safety requirements Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 30405-2013 | English | 879 |
Add to Cart
|
6 days [Need to translate]
|
Tannery machines -- Reciprocating roller machines -- Safety requirements
| Valid |
GB/T 30405-2013
|
PDF similar to GB/T 30405-2013
Standard similar to GB/T 30405-2013 GB 19865 GB/T 30410 GB/T 30404
Basic data Standard ID | GB/T 30405-2013 (GB/T30405-2013) | Description (Translated English) | Tannery machines -- Reciprocating roller machines -- Safety requirements | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | Y94 | Classification of International Standard | 59.140.40 | Word Count Estimation | 40,497 | Quoted Standard | GB/T 3766-2001; GB 4208-2008; GB 5226.1-2008; GB/T 7932-2003; GB/T 8196-2003; GB 12265.3-1997; GB/T 15706-2012; GB 16754-2008; GB/T 16855.1-2008; GB/T 17454.2-2008; GB/T 18153-2000; GB 18209.1-2010; GB/T 18831-2010; GB/T 19436.1-2013; GB/T 19436.2-2013; G | Adopted Standard | EN 972-1998 + A1-2010, NEQ | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the leather and fur roll when reciprocating machinery use by the intended use and the use by the manufacturer under the conditions of foreseeable misuse, all of the major hazards associated machinery, hazardous or dangerous event s |
GB/T 30405-2013: Tannery machines -- Reciprocating roller machines -- Safety requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tannery machines. Reciprocating roller machines. Safety requirements
ICS 59.140.40
Y94
National Standards of People's Republic of China
Leather Machinery
Roller reciprocates Mechanical safety requirements
Issued on. 2013-12-31
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 2
3 Definitions and Terminology 2
4 Safety requirements and/or protective measures 3
4.1 General 3
4.2 roller reciprocates machinery General Requirements 3
4.3 All hazardous area safety requirements 4
Security requirements 4.4 workspace 5
Security 4.5 into the zone of Claim 7
Verify safety requirements 8 5
6 Use the information 8
6.1 General 8
6.2 signal and warning device 8
6.3 User's Guide 8
6.4 mark 10
Typical Structure Appendix A (informative) machine 11
Typical described in Appendix B (informative) machine is defined in the legend of the machine 18
Annex C (normative) to prevent the risk of noise (machines listed in Chapter 1) 22
Annex D (informative) a list of 23 major hazard
Appendix E (normative) noxious liquid, gas, mist, smoke and dust cleared 33
Annex F (normative) Fire 34
References 35
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard reference method using a redrafting of the European standard EN972.1998 A1.2010 "Mechanical leather roller reciprocates machine
Mechanical safety requirements, "the preparation, and EN972.1998 A1.2010 non-equivalent degree of consistency.
The standard structure and EN972.1998 A1.2010 is different, but its safety requirements, protective measures, etc. and EN972.1998
A1.2010 exactly.
The standard proposed by China National Light Industry Council.
This standard by the National Light Industry Machinery Standardization Technical Committee leather machinery Technical Committee (SAC/TC101/SC1) centralized.
This standard was drafted. Yantai Yi Long Machinery Co., Ltd. Xinji Julong Leather Machinery Co., Ltd., Jiaxing University, Yangzhou Yang Bao machinery have
Limited, China Leather and Footwear Industry Research Institute, Jiangsu Port Allen Leather Machinery Co., Ltd. Dongguan City Hang Bo Electrical Technology Co., Societe Generale
Leather Technology Co., Ltd., Hebei Dongming Industrial Group Co., Ltd., Zhejiang Zhonghui Fur & Leather Co., Ltd., Shenzhen City's Tu Jing Yue Technology has
Limited.
The main drafters of this standard. Xu Jianping, Zhang Dongxu, Guo Liying, Peng Wenli, pipe dragon, Li Gang, Kong Peili and Wang Xiang, He Zhaohui,
Heshao Ming, Liu, Ma Jian standard, painted into the red.
Introduction
In accordance with the provisions of GB/T 15706-2012, the present standard belongs to the C standard.
Machinery covered by this standard and the risk of a dangerous state or hazardous events covering a range given in the scope of this standard.
When this C class standards with Class A or Class B standard standard shall not at the same time, according to the C class standard requirements for design and manufacture
Machines give priority to this type C standard requirements.
Leather Machinery
Roller reciprocates Mechanical safety requirements
1 Scope
This standard specifies the leather and fur machinery roller reciprocates by its intended purpose as well as the manufacturer foreseeable misuse under conditions
With, all the machine-related significant risk, hazard or danger status event.
This standard also provides leather and fur roller reciprocates mechanical terms and definitions, as well as in GB/T 15706-2012 of 5.4
Out of the machine life cycle requirements for each stage safety and/or protective measures, safety requirements validation and use of information.
This standard applies to the following feed roller having opening and closing reciprocating used in the processing of animal hides and skins during or feed
Roll reciprocation mechanical device (a typical structure is shown in Figure A Figure A.1 ~ Appendix A.13, typically described in Appendix B).
1) buffing machines [see A.1a) and A.1b)];
2) polishing machine [see A.1a) and A.1b)];
3) ironing machines (sheepskin and fur) [see A.2a) and A.2b)];
4) carding machines [(see Figure A.3a) and A.3b)];
5) shearing machine (sheepskin and fur) [see A.4a) and A.4b)];
6) Universal roller staking machines [see A.5a) and A.5b)];
7) spreading machine [see A.6a) and A.6b)];
8) off the Bar [see A.6a) and A.6b)];
9) Net surface plane [see Fig A.6a) and A.6b)];
10) Hair Removal Machine [see A.6a) and A.6b)];
11) Wringer [see A.6a) and A.6b)];
12) Roller Screed [see A.7a) and A.7b)];
13) roll staking machine [see A.8a) and A.8b)];
14) fleshing machine [see A.9a) and A.9b)];
15) pelt fleshing machine [see A.10a) and A.10b)];
16) Wet grinding machine leather [see A.11a) and A.11b)];
17) Shaving Machine (discharge formula) [see A.12a) and A.12b)];
18) shaving machines (feed type) [see A.13a) and A.13b)].
Note. Unless otherwise indicated, the standard reference to "feed rollers" also includes "feeding device."
Taking into account the intended use of the machine, foreseeable misuse, component and system failures, this standard does not apply to the production standards promulgated before
machine.
This standard provides the design stage to reduce noise terms (see 4.3.4 and Appendix C), the machine in question does not provide the noise level testing regulations
Away. Without this procedure, the manufacturer can not meet their obligations to provide the market a machine noise emission values.
The Standard Appendix D lists all significant risk.
Dust, smoke and steam discharge in Appendix E.
Fire in Appendix F.
This standard gives general measures to reduce the risk of normative appendix. The manufacturer shall design and direct method can be used to verify
Successful in reducing these risks.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30405-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30405-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30405-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30405-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|