|
US$134.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30025-2013: Cranes -- Measurement of the mass of a crane and its components
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30025-2013 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Cranes -- Measurement of the mass of a crane and its components
| Valid |
GB/T 30025-2013
|
PDF similar to GB/T 30025-2013
Basic data | Standard ID | GB/T 30025-2013 (GB/T30025-2013) | | Description (Translated English) | Cranes -- Measurement of the mass of a crane and its components | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 7,797 | | Quoted Standard | ISO 4306-1; ISO 4310; ISO 9373 | | Adopted Standard | ISO 11629-2004; IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 23 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: cranes and/or component quality measurement the basic method. This standard is IS, 4310 supplement, applies to IS, 4306-1 defined all types of cranes. | GB/T 30025-2013: Cranes -- Measurement of the mass of a crane and its components---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes. Measurement of the mass of a crane and its components
ICS 53.020.20
J80
National Standards of People's Republic of China
Cranes and crane components measuring quality
(ISO 11629.2004, IDT)
Issued on. 2013-11-27
2014-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 11629.2004 "Cranes and crane components Quality Measurement" (in English).
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 6974.1-2008 Cranes Terminology - Part 1. General terms (GB/T 6974.1-2008,
ISO 4306-1.2007, IDT);
--- GB/T 5905 Cranes - Test code and procedures (GB/T 5905-2011, ISO 4310.2009, IDT);
--- GB/T 21457 Cranes and related equipment - Test Measurement precision parameter (GB/T 21457-2008,
ISO 9373. 1989, IDT).
For ease of use, this standard also made the following editorial changes.
--- The International Standard ISO 11629.2004 in 4.3 and 5.2 of this standard combined 5.2;
--- Because the standard does not appear in the body of the international standard ISO 7363 "Cranes and lifting appliances - Technical characteristics and acceptance documents", so the
Remove the standard ISO 11629.2004 in the "References."
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee crane (SAC/TC227) centralized.
This standard is drafted by. Sany Group Co., Ltd., Beijing Design Institute of lifting the transport machinery, lifting the transport machinery for Quality State
Supervision and Inspection Center.
Drafters of this standard. Chen Ling, Li Cuiying, Yi Xiaogang, Pengguo Cheng, Lin Fukui.
Cranes and crane components measuring quality
1 Scope
This standard specifies the basic method of cranes and/or component quality measurement.
This standard is a supplement to ISO 4310, and applies to all types of cranes as defined in ISO 4306-1.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 4306-1 crane terminology - Part 1. General terms (Cranes-Vocabulary-Part 1. General)
ISO 4310 Cranes - Test code and procedures (Cranes-Testcodeandprocedures)
ISO 9373 Cranes and related equipment - Test parameter measurement accuracy requirements (Cranesandrelatedequipment-Ac-
curacyrequirementsformeasuringparametersduringtesting)
3 Terms and Definitions
As defined in ISO 4306-1 and the following terms and definitions apply to this document.
3.1
Apparatus appliance
Measurement crane and/or a set of components and equipment required for quality.
3.2
Simple measurement simplemeasurement
Measurement data can be read directly from a measuring instrument or read out simultaneously from several measuring instruments of the calculated
get.
3.3
Complex measurements complexmeasurement
Measurement data read out by the measuring instrument on several consecutive passes stepwise calculated.
4 and precision instruments
4.1 The following instruments can be used to measure the quality of cranes and/or parts thereof.
a) balance;
b) dynamometer (compression or tension);
c) a blade-shaped strut;
d) flat;
e) Level;
f) auxiliary hoisting mechanism;
g) slings, wire rope or chain.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30025-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30025-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30025-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30025-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|