|
US$1569.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29910.6-2013: Industrial communication networks -- Fieldbus specifications -- Type 20 HART specification -- Part 6: Additional application layer service definition and protocol specification
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29910.6-2013 | English | 1569 |
Add to Cart
|
10 days [Need to translate]
|
Industrial communication networks -- Fieldbus specifications -- Type 20 HART specification -- Part 6: Additional application layer service definition and protocol specification
| Valid |
GB/T 29910.6-2013
|
PDF similar to GB/T 29910.6-2013
Basic data | Standard ID | GB/T 29910.6-2013 (GB/T29910.6-2013) | | Description (Translated English) | Industrial communication networks -- Fieldbus specifications -- Type 20 HART specification -- Part 6: Additional application layer service definition and protocol specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N10 | | Classification of International Standard | 25.040 | | Word Count Estimation | 71,718 | | Quoted Standard | GB/T 9387.1; GB/T 9387.3; GB/T 17967; GB/T 29910.2-2013; GB/T 29910.3-2013; GB/T 29910.4-2013; GB/T 29910.5-2013; IEC/TR 61158-1-2010; IEC 61784-1-2010; IEC 61781-2-2010 | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the GB/T 29910. 3, the application layer service definition and protocol specification GB/T 29910. 4 and GB/T 29910. 5 defined in IEC Fieldbus type 20 (HART and WirelessHART) communication networks. The standard provides additional | GB/T 29910.6-2013: Industrial communication networks -- Fieldbus specifications -- Type 20 HART specification -- Part 6: Additional application layer service definition and protocol specification
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Industrial communication networks Fieldbus specifications TyPe 20 HART specification Part 6. Additional application layer service definition and protocol specification
ICS 25.040
N10
National Standards of People's Republic of China
Industrial communication networks - Fieldbus specifications
Type 20. HART specification - Part 6. Application layer
Additional service definition and protocol specification
Type20HARTspecification-Part 6. Additionalapplicationlayerservice
Issued on. 2013-12-17
2014-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions, abbreviations, symbols, conventions 2
Terms and Definitions 3.1 Reference Model 2
3.2 specific terms and definitions 2
3.3 Acronyms 6
3.4 Symbols 7
3.5 Conventions 8
4 Application Layer Service Definition 11
4.1 General Concepts 11
4.2 Data Type ASE 11
4.3 Communication Model Specification 11
5 Application layer protocol specification 24
5.1 Abstract Syntax 24
25 5.2 Transfer Syntax
5.3 General Regulations 43
5.4 FAL state machine 44
Appendix A (normative) Application process status 50
Appendix B (normative) device variables and dynamic variables 53
Annex C (normative) General Table 57
Annex D (normative) coherence and equipment version 62
Appendix E (normative) command requires 64
Figure 1 Request APDU 27
Figure 2 normal response APDU 27
Figure 3 command error response APDU 28
Figure 4 Polymerization command APDU 28
5 client state machine 44
Figure 6 server state machine 47
Figure A.1 loop current value saturation current value and alarm 52
Figure B.1 device variables and dynamic variables 53
Figure B.2 Main Variables section 54
Figure B.3 device variable status 56
Table 1 state machine with 10 conventions
Table 2 communication status value 12
Table 3 reads the service parameters 13
14 Table 4. Write service parameters
Table 5 Information Reporting Service parameter 15
Table 6 action service parameters 16
Table 7 Response code values \u200b\u200b25
Table 8 application process states 26
Table 9 extended status value 26
Table 10 Write Primary Variable Range Value field 31
Table 11 Write primary variable range of command-specific response code 31
Table 12 entered - Exit constant current mode request Value Field 32
Table 13 entered - Exit constant current mode in response to Value Field 32
Table 14 entered - Exit constant current mode command-specific response code 32
Table 15 Write primary variable Unit Value Field 33
Table 16 Write primary variable unit command-specific response code 33
Table 17 Loop Current Zero request Value Field 33
Table 18 Loop Current Zero command-specific response code 34
Table 19 gain adjustment circuit current request Value field 34
Table 20 adjust the loop current gain command-specific response code 35
Table 21 Value read dynamic variables allocation in response to field 35
Table 22 Reading a dynamic variable assigned command-specific response code 36
Table 23 write dynamic variable assigned Value Field 36
Table 24 write dynamic variable assignment command-specific response code 36
Table 25 Number Value write response preamble field 37
Table 26 The number of write response preamble command-specific response code 37
Table 27 reading device variable setpoint request Value field 38
Table 28 reading device variable setpoint response Value field 38
Table 29 reading device variable setpoint command-specific response code 38
Table 30 reading device variable adjustment guide request Value field 38
Table 31 reads variable adjustment guide device 39 in response to the Value field
Table 32 reading device variable setpoint command-specific response code 39
Table 33 Write device variable setpoint Value field 40
Table 34 Write device variable setpoint command-specific response code 40
Table 35 reset the device to adjust the Value field variable 41
Table 36 reset the device to adjust the variable command-specific response code 41
Table 37 Polymerization command-specific response code 43
Table 38 client state machine state transition 44
Table 39 server state machine state transition 47
Table 40 FormReqApdu function 48
Table 41 Command Function 48
Table 42 CommErr function 48
Table 43 RespCode function 49
Table 44 Commcode function 49
Table 45 ApStatus function 49
Table 46 Value Function 49
Table A.1 cause configuration changes Command 50
Table C.1 conversion function codes 58
Table C.2 Alarm Select Code 59
59 Table C.3 write protection code
Table C.4 physical layer signal codes 59
Table C.5 flag assigned code 60
Table C.6 Loop Current Mode code 60
Table C.7 set point code 60
Table C.8 flag code 61 analog channels
Table C.9 Device variable code 61
Foreword
GB/T 29910 "Industrial communication networks - Fieldbus specifications - Type 20. HART specification" is divided into the following six sections.
--- Part 1. HART wired network physical layer service definition and protocol specification;
Part --- Article 2. HART wired network data link layer service definition and protocol specification;
--- Part 3. Application layer service definition;
--- Part 4. Application layer protocol specification;
Part --- Article 5. WirelessHART wireless communication network and communication profile;
--- Part 6. Application layer protocol specification definitions and additional services.
This section GB/T Part of 629,910.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The partial modification of the use of HART Communication Foundation (HCF) technical documentation HCF_SPEC-710 "Industrial communication networks through wired
Letter Network HART. HARTFSK, DLL and APL supplementary "Application layer service definition and protocol specification, the technical content of the original
English text there is no difference in the structure of the text layout appropriately adjusted.
This part is proposed by China Machinery Industry Federation.
This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes.
This section is drafted. Machinery Industrial Instrumentation Technology and Economy Institute, HART Communication Foundation, Chinese Academy of Sciences since
Automation Research Institute, Shanghai Automation Instrumentation Co., Southwest University, Shanghai Institute of Industrial Automation Instrumentation, Systems Engineering Beijing and Belgium
Cheng Co., Ltd., Beijing Science and Technology Co., Austin, Fujian on the Run Precision Instrument Co., Ltd., China Instrument Industry Association, Shanghai
Han was heavenly networking Technology Co., Ltd., Chongqing Institute of Industrial Automation Instrumentation, double Group (Deyang) Heavy Equipment Co., Ltd.
The main drafters of this section. high mirror Mei, Liu Dan, Wang Linkun, Feng Xiang Tao, Liang Wei, Yang family, including Wei-hua, Liu Feng, Wang Jun, Luo,
Chen Xiaofeng, Ge Jian, Dongjing Chen, Jiangji You.
Industrial communication networks - Fieldbus specifications
Type 20. HART specification - Part 6. Application layer
Additional service definition and protocol specification
1 Scope
IEC GB/T 29910 This part complements and extends GB/T 29910.3, GB/T 29910.4 and GB/T 29910.5 defined
Application layer service definition and protocol specification Fieldbus type 20 (HART and WirelessHART) communication networks. This section provides attachment
HART and WirelessHART added application layer structure and service elements. These additional application-layer structure and service elements support automatic
Environments between the device and the application of "strict timing requirements (time-critical)" and "non-time-critical (non-time-critical)"
The message communication. The term "time critical" indicates that there is a time window, within this time window, the defined requirements in a deterministic like
Stage to complete the required one or more specified actions. Within the time window does not complete the required actions, these actions will generate a request for applications lost
The risk of failure, and even cause accompanying instruments, equipment and possible physical danger.
This section is used to describe the application layer protocol elements of public services and concepts and templates, as described in IEC /T R61158-1.2010 Chapter 9
This section and Appendices C and D.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 9387.1 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (ISO /IEC 7498-1,
IDT)
GB/T 9387.3 Information technology - Open Systems Interconnection - Basic Reference Model - Part 3. Naming and addressing (ISO /
IEC 7498-3, IDT)
GB/T 17967 Information technology - Open Systems Interconnection - Basic Reference Model OSI service definition conventions (ISO /IEC 10731,
IDT)
Type 20 GB/T 29910.2-2013 Industrial communication networks - Fieldbus specifications. HART specification - Part 2. HART
Wired network data link layer service definition and protocol specification
GB/T 29910.3-2013 Industrial communication networks - Fieldbus specifications - Type 20. HART specification - Part 3. Application layer
Service definition (IEC 61158-5-20.2010, IDT)
GB/T 29910.4-2013 Industrial communication networks - Fieldbus specifications - Type 20. HART specification - Part 4. Application layer
Protocol Specification (IEC 61158-6-20.2010, IDT)
GB/T 29910.5-2013 Industrial communication networks - Fieldbus specifications - Type 20. HART specification Part 5. Wire-
lessHART wireless communication network and communication profiles (IEC 62591.2010, IDT)
IEC /T R61158-1.2010 Industrial communication networks - Fieldbus specifications - Part 1. IEC 61158 and IEC 61784 series
Overview and guidance (Industrialcommunicationnetworks-Fieldbusspecifications-Part 1. Overviewandguid-
ancefortheIEC 61158andIEC 61784series)
IEC 61784-1.2010 Industrial communication networks profiles - Part 1. Fieldbus profile (IEC 61784-1.2010Industrial
CommunicationNetworks-Profiles-Part 1. Fieldbusprofiles)
|