|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29751-2013: Requirement for adoption and installation of piping compensatory couplings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29751-2013 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Requirement for adoption and installation of piping compensatory couplings
| Valid |
GB/T 29751-2013
|
PDF similar to GB/T 29751-2013
Basic data | Standard ID | GB/T 29751-2013 (GB/T29751-2013) | | Description (Translated English) | Requirement for adoption and installation of piping compensatory couplings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U50 | | Classification of International Standard | 47.020.30 | | Word Count Estimation | 14,129 | | Quoted Standard | GB/T 12465-2007; steel ship classification rules (2009) China Classification Society | | Regulation (derived from) | National Standards Bulletin No. 18 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: pipe fittings compensation (hereinafter referred to as compensation joints) Classification, design and selection requirements and installation requirements. This standard applies to: GB/T 12465-2007 regulations Compensation joints | GB/T 29751-2013: Requirement for adoption and installation of piping compensatory couplings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Requirement for adoption and installation of piping compensatory couplings
ICS 47.020.30
U50
National Standards of People's Republic of China
Compensation pipeline fittings selection and installation requirements
Issued on. 2013-09-18
2014-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Category 2
5 using 3
6 Installation 6
Appendix A (informative) pipeline stretching Calculation 9
Reference 10
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China State Shipbuilding Corporation.
This standard by the National Marine Machinery Standardization Technical Committee Piping Accessories Technical Committee (SAC/TC137/SC3) centralized.
This standard was drafted. Wuxi Jinyang pipeline Accessories Co., Ltd., Beijing Municipal Engineering Design Institute, China Shipbuilding Industry Fully
Combined technical and economic research institute.
The main drafters of this standard. Liu, and Li Sheng Shen, Lin Haiyan, Yang Li, Dong Hung, Mei-Ling Zhang, Yang Shili, Lu Bin, Chen Jie.
Compensation pipeline fittings selection and installation requirements
1 Scope
This standard specifies the compensation pipe fittings (hereinafter referred to as compensation joints) classification, selection of design requirements and installation requirements.
This standard applies to the design selection GB/T 12465-2007 provisions of compensation joints, installation and acceptance, waveform compensation rubber joints also
Reference may be used.
This standard does not apply to metal bellows expansion joint design and the selection of construction and installation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12465-2007 pipe fittings Compensation
Seagoing Steel Ships specification (2009) China Classification Society
3 Terms and Definitions
GB/T 12465-2007 define the following terms and definitions apply to this document. For ease of use, repeat the following list
GB/T 12465-2007 of certain terms and definitions.
3.1
Song sets compensation joints sleeveexpansionjoint
By the body, seals, consisting of the pressing member for absorbing axial displacement, but can not withstand the pressure thrust of the pipe loose set of connected devices.
[GB/T 12465-2007, Definition 3.1]
3.2
Compensation limit set loose fitting sleevelimitedexpansionjoint
By a loose set of compensation limit expansion joints and tubes and other components composition, to prevent excessive displacement due to lead pipe leakage or damage compensation joints for
Pipeline absorb axial displacement and withstand the pressure thrust within the allowable range of displacement means sets loose connections.
[GB/T 12465-2007, 3.2 Definition]
3.3
Song sets of power transmission connectors compensating sleevejointfortransmissionforce
By the Falan Song sets compensation joints and short pipe flanges, and other components of power transmission screw components. Passed by the connecting member and the pressure thrust compensation pipeline safety
Loading error, does not absorb axial displacement. Means and loose tube pumps, valves and other accessories for the connection.
[GB/T 12465-2007, the definition 3.3]
3.4
Large deflection compensation set loose joints largeflexibilityexpansionjoint
By a short pipe flange, body, gland, ring, stopper, sealing, clamping member, used to absorb axial displacement and deflection of 6 ° ~ 7 °
Angular displacement of the pipe loose set of connected devices.
[GB/T 12465-2007, the definition 3.4]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29751-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29751-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29751-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29751-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|