|
US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29713-2013: Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29713-2013 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
| Valid |
GB/T 29713-2013
|
PDF similar to GB/T 29713-2013
Basic data | Standard ID | GB/T 29713-2013 (GB/T29713-2013) | | Description (Translated English) | Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J33 | | Classification of International Standard | 25.160.20 | | Word Count Estimation | 13,136 | | Quoted Standard | GB/T 1954; GB/T 2652; GB/T 3375; GB/T 4334; GB/T 25775; GB/T 25778 | | Adopted Standard | ISO 14343-2009; MOD | | Regulation (derived from) | National Standards Bulletin No. 19 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: stainless steel wire, welding filler wire and tape models, technical requirements, test methods, inspection rules, packaging, marking and quality certification. This standard applies to: MIG arc welding, non- MIG arc welding, subm | GB/T 29713-2013: Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
ICS 25.160.20
J33
National Standards of People's Republic of China
Stainless steel wire and ribbon
Wireelectrodes, stripelectrodes, wiresandrodsforarcweldingof
(ISO 14343.2009, Weldingconsumables-Wireelectrodes, stripelectrodes,
Classification, MOD)
Issued on. 2013-09-18
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Model 1
5 Technical requirements 6
6 Test methods 6
7 7 inspection rules
8 packaging, marking and quality certificate 7
Appendix A (informative) Deposited metal tensile properties 8
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted law revision of international standards ISO 14343.2009 "welding materials stainless steel and heat-resistant steel arc welding
Wire, filled with silk and ribbon category. "
This standard and ISO 14343.2009 and the main technical difference between the following reasons.
--- Remove the International Standards Normative documents referenced in direct reference to domestic standards, China has the appropriate conversion and increase
The GB/T 3375 "Welding term" standards to meet our technical requirements;
--- Wire model is not used in "SS" on behalf of stainless steel wire and filler wire, according to our habits, using the "S" on behalf of stainless steel welding
Silk and silk padding to match the type of welding consumables;
--- Ribbon models did not use "BS" on behalf of stainless steel ribbon, according to our habits, the use of "B" on behalf of ribbon, so that with our
Welding model is consistent;
--- According to China's actual application, increased 209,218,219,240,307Si, 446LMo, 2553,3556 and other chemical into eight
Points classification;
--- Increase the corrosion resistance of the deposited metal and weld ferrite content of the technical requirements, negotiated by both parties, in order to meet the actual
demand.
This standard and ISO 14343.2009 as compared to, for ease of use, the structure changes as follows.
--- By the models, technical requirements, test methods, inspection rules, packaging, marking and quality certification be written.
This standard also made the following editorial changes.
--- Standard name was changed to "stainless steel wire and ribbon."
This standard by the National Standardization Technical Committee welded (SAC/TC55) and focal points.
This standard was drafted. Harbin Welding Research Institute, Changzhou Huatong Welding Industry Co., Ltd., Tianjin Bridge Welding Materials Group Co., Ltd., days
Tsu Golden Bridge Welding Materials Group Co., Ltd., Sichuan Atlantic Welding Materials Co., Ltd. Jiangsu Jiang wire, welded Group Kunshan Beijing
Material Technology Co., Ltd.
Drafters of this standard. Following Chu Jun, Li Zhenhua, Cui, to Hou Chang, Jiang Yong, Ji Wen Bin, Xu Kai, Zheng Iloilo.
Stainless steel wire and ribbon
1 Scope
This standard specifies the stainless steel wire, filled with silk and ribbon models, technical requirements, test methods, inspection rules, packaging, marking and
prove.
This standard applies to MIG arc welding, non-consumable electrode gas shielded arc welding, submerged arc welding, electroslag welding, plasma arc welding and laser
Light welding and other stainless steel wire, filled with silk and ribbon.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1954 Cr-Ni austenitic stainless steel weld iron ferrite content measurement method (GB/T 1954-2008, ISO 8249.2000,
MOD)
GB/T 2652 and deposited weld metal tensile test method (GB/T 2652-2008, ISO 5178.2001, IDT)
GB/T 3375 Welding terminology
GB/T 4334 intergranular corrosion of stainless steel grain metals and alloys corrosion test method (GB/T 4334-2008, ISO 3651-1.
1998, ISO 3651-2.1998, MOD)
GB/T 25775 Technical delivery conditions for welding material product type, dimensions, tolerances and marking (GB/T 25775-2010,
ISO 544.2003, MOD)
GB/T 25778 welding materials procurement guidelines (GB/T 25778-2010, ISO 14344.2010, MOD)
3 Terms and Definitions
GB/T 3375 defined by the following terms and definitions apply to this document.
3.1
Filling wire rod; wire
Filler wire is a wire type, only as a filler metal during welding, does not conduct current. Generally straight, disc-shaped, or barrel roll for
Goods, generally used for non-melting polar gas shielded arc welding, plasma arc welding and laser welding and other welding processes.
3.2
Ribbon stripelectrode
Ribbon is a type of welding materials, both as welding filler metals and conducting current. Usually available in roll form, typically used for submerged arc
Welding and electroslag welding.
4 Model
4.1 Model divided
Wire, filled wire (hereinafter referred to as wire) and ribbon model divided according to their chemical composition.
|