|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29412-2012: Absorber of pressure swing adsorption for hydrogen purification
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29412-2012 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Absorber of pressure swing adsorption for hydrogen purification
| Valid |
GB/T 29412-2012
|
PDF similar to GB/T 29412-2012
Basic data | Standard ID | GB/T 29412-2012 (GB/T29412-2012) | | Description (Translated English) | Absorber of pressure swing adsorption for hydrogen purification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | F19 | | Classification of International Standard | 27.180 | | Word Count Estimation | 13,165 | | Quoted Standard | GB 150.4; GB 713; GB/T 5330; GB 12337; GB/T 20663; JB/T 4700; JB/T 4711; JB/T 4730.2; JB/T 4730.3; JB/T 4730.4; JB/T 4730.5; JB 4732; NB/T 47008 | | Regulation (derived from) | National Standards Bulletin 2012 No. 42 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the PSA hydrogen purification by adsorption the basic requirements, materials, design, manufacture, inspection and testing and marking, packaging and shipping. This standard applies to the design pressure is greater than or equal t | GB/T 29412-2012: Absorber of pressure swing adsorption for hydrogen purification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Adsorber of pressure swing adsorption for hydrogen purification
ICS 27.180
F19
National Standards of People's Republic of China
PSA purified hydrogen adsorption device
Issued on. 2012-12-31
2013-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the National Standardization Technical Committee hydrogen (SAC/TC309) and focal points.
This standard was drafted. Southwest Chemical Industry Research and Design Institute, Sichuan Tianyi Science and Technology Co., Ltd., China National Institute of Standardization, Zhejiang University, the
West Sea Technology Co., Ltd. Sichuan Yalian.
The main drafters of this standard. Pan Shijun, ZHOU Yao, Yang Jing, Li Yan, Xu Ping, Wu Fang, Gao Jianhua, Li Qiong, Wanxing, Denglong Wei, Fuzong Guo,
Zhang Jie.
PSA purified hydrogen adsorption device
1 Scope
This standard specifies the PSA purified hydrogen adsorption for the basic requirements of materials, design, fabrication, inspection and testing and marking, packaging and
transport.
This standard applies to the design pressure is greater than and less than or equal to 0.1MPa 10MPa, no less than the degree of vacuum pressure swing adsorption of 0.02MPa
Purified hydrogen adsorption device.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150.4 Pressure Vessels Part 4. fabrication, inspection and acceptance
GB 713 boiler and pressure vessel steel plate
GB/T 5330 industrial woven square hole wire mesh
GB 12337 steel spherical tanks
GB/T 20663 bladder-type accumulator pressure vessel
JB/T 4700 Pressure vessel flange classification and technical conditions
JB/T 4711 Pressure vessel coated with transport packaging
JB/T 4730.2 Non-destructive testing of pressure equipments - Part 2. ray detector
JB/T 4730.3 Non-destructive testing of pressure equipments - Part 3. Ultrasonic testing
JB/T 4730.4 Non-destructive testing of pressure equipments - Part 4. Magnetic particle testing
JB/T 4730.5 Non-destructive testing of pressure equipments - Part 5. penetrant testing
JB4732 steel pressure vessel analysis and design standards
NB/T 47008 Pressure for Carbon and Alloy Steel Forgings
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Built adsorbents, alternating loads, hydrogen-containing gas from the hydrogen separation and purification equipment monomers.
3.2
Airflow distributor gasdistributor
For adsorbing inlet and outlet of the distribution, filtering or compression adsorbent carrying, to ensure uniform air distribution apparatus.
3.3
Flower board perforatedplate
It has a regular arrangement of apertures for the distribution of air or a perforated plate bearing the adsorbent.
3.4
Squirrel cage rotorcage
It has a regular arrangement of holes or hole-shaped grid for distribution of air or bearing cylindrical component of the adsorbent.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29412-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29412-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29412-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29412-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|