|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29287-2012: Pulps -- Laboratory beating -- PFI mill method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29287-2012 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Pulps -- Laboratory beating -- PFI mill method
| Valid |
GB/T 29287-2012
|
PDF similar to GB/T 29287-2012
Basic data | Standard ID | GB/T 29287-2012 (GB/T29287-2012) | | Description (Translated English) | Pulps -- Laboratory beating -- PFI mill method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y31 | | Classification of International Standard | 85.040 | | Word Count Estimation | 11,141 | | Quoted Standard | GB/T 462; GB/T 740; GB/T 5399; GB/T 24327-2009; GB/T 29285-2012 | | Adopted Standard | ISO 5264-2-2002, MOD | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of PFI mill beating laboratory methods. This method is limited to sampling and beating the pulp, and distribution of samples taken and beating equipment. This standard applies to all kinds of chemical pulp and semi- chemica | GB/T 29287-2012: Pulps -- Laboratory beating -- PFI mill method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Laboratory beating. PFI mill method
ICS 85.040
Y31
National Standards of People's Republic of China
Pulp beating laboratory PFI mill method
(ISO 5264-2.2002, MOD)
Issued on. 2012-12-31
2013-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard uses redrafted Law Amendment uses ISO 5264-2.2002 "Pulp Laboratory beating - Part 2. PFI mill method."
This standard and ISO 5264-2.2002 main technical differences and the reasons are as follows.
--- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● Modify with international standards of GB/T 462 instead of ISO 287, ISO 638;
● equivalents adoption of international standards GB/T 740 instead of ISO 7213;
● equivalents adoption of international standards GB/T 5399 instead of ISO 4119;
● Modify with international standards of GB/T 24327 instead of ISO 5263-1;
● Modify with international standards of GB/T 29285 instead of ISO 5263-2 and ISO 5263-3.
--- Laboratory instruments and reagents in the balance by the error is reduced to ± 0.2g ± 0.1g, improve the accuracy of the standard;
--- Change the standard water distilled, deionized water or water of similar quality, enhanced operability standards;
--- Test instruments and reagents increased Buchner funnel.
The standard proposed by China National Light Industry Council.
The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized.
This standard was drafted. China Pulp and Paper Research Institute, the national paper quality supervision and inspection center, China Paper Association Professional Committee of Standardization
Members will.
The main drafters of this standard. Records, Zhang Qing.
Pulp beating laboratory PFI mill method
1 Scope
This standard specifies the use of PFI mill beating laboratory methods. This method is limited to beating the pulp sampling and take samples
Distribution and beating equipment.
Note. The beating was to test the physical properties of the pulp of the preparatory phase.
This standard applies to all kinds of chemical pulp and semi-chemical pulp. In practice, for some very long fiber pulp, measured by this method
It may not get satisfactory results.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008, ISO 287. 1985, ISO 638.
1978, MOD)
GB/T 740 pulp samples taken (GB/T 740-2003, ISO 7213. 1981, IDT)
GB/T 5399 pulp slurry concentration measurement (GB/T 5399-2004, ISO 4119.1995, IDT)
GB/T 24327-2009 Laboratory wet pulp solution dissociation from chemical pulp (ISO 5263-1.2004, MOD)
Wet Solutions GB/T 29285-2012 laboratory pulp from mechanical pulp dissociation (ISO 5263-2.2004, ISO 5263-3.2004,
MOD)
Principle 3
The predetermined concentration of pulp beating, beating and beating roll chamber between the roll and smooth beating beating room with Flying at different circumferential speed
Rotate in the same direction.
4 Test Instruments and reagents
4.1 PFI mill. See Appendix A.
4.2 Standard dissociation device. the see GB/T 24327-2009 Appendix A or GB/T 29285-2012 Appendix B.
4.3 Balance. indexing is 0.1g.
4.4 distilled water, deionized water or water of similar quality.
4.5 standard pulp. for beating control, the storage time should be long enough to avoid the physical properties of the pulp changes. If possible, a standard pulp
Beating the best species and types of equipment in the normal processing of the same pulp. Some pulp is not stable enough, you may have to select another
pulp.
In order to avoid the influence of storage time, standard slurry should be stored at room temperature (not too high relative humidity), the dark and dust-free environment.
Note. If the standard slurry storage under recommended conditions, in most cases, can be stable for a decade or so. If the tensile strength and tear changes, says
Ming standard pulp is no longer stable. You can check its stability by measuring a standard viscosity of the slurry, such as checked twice a year.
4.6 Buchner funnel.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29287-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29287-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29287-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29287-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|