|
US$954.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29268.4-2012: Information technology -- Biometric performance testing and reporting -- Part 4: Interoperability performance testing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29268.4-2012 | English | 954 |
Add to Cart
|
3 days [Need to translate]
|
Information technology -- Biometric performance testing and reporting -- Part 4: Interoperability performance testing
| Valid |
GB/T 29268.4-2012
|
PDF similar to GB/T 29268.4-2012
Basic data | Standard ID | GB/T 29268.4-2012 (GB/T29268.4-2012) | | Description (Translated English) | Information technology -- Biometric performance testing and reporting -- Part 4: Interoperability performance testing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L71 | | Classification of International Standard | 35.040 | | Word Count Estimation | 48,462 | | Quoted Standard | GB/T 29268.1-2012; GB/T 29268.2-2012; ISO/IEC 10918-1; ISO/IEC 15444-1; ISO/IEC 19785-1; ISO/IEC 19794-2; ISO/IEC 19794-3; ISO/IEC 19794-4; ISO/IEC 19794-5; ISO/IEC 19794-6; ISO/IEC 19794-8; ISO/IEC 19794-11; ISO/IEC 24713-1; ISO/IEC 29109-2 | | Adopted Standard | ISOIEC 19795-4-2008, IDT | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the required assessment requirements: a standard exchange format (SIF) available samples consistent performance, consistent with the SIF available when the sample swap performance, consistent with the SIF, and with special the samp | GB/T 29268.4-2012: Information technology -- Biometric performance testing and reporting -- Part 4: Interoperability performance testing
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology Biometric performance testing and reporting Part 4. Interoperability performance testing
ICS 35.040
L71
National Standards of People's Republic of China
Information technology - Biometric performance testing and reporting
Part 4. Interoperability performance testing
Part 4. Interoperabilityperformancetesting
(ISO /IEC 19795-4.2008, IDT)
Issued on. 2012-12-31
2013-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Standard Compliance 1
3 Normative references 1
4 Terms and definitions 2
Acronyms 5 5
6 Goal 5
6.1 Scope 5
6.2 Target Applications 8
6.3 Objective 10
7 Measure 11
7.1 Overview 11
7.2 Quality Factor 12
7.3 Interoperability matrix 13
15 7.4 Special Performance
8 16 test execution
8.1 Test structure 16
Sample data 16 8.2
8.3 Compliance Testing 18
8.4 sBDBs limit of 18
8.5 assembly 19
8.6 21 planning decisions
8.7 Game prevention and detection 24
8.8 Test Procedure 26
9 Interoperability Matrix Description 27
9.1 interoperability subsystem determines 27
9.2 on previously certified product interoperability 31
9.3 overall adequacy of 33
Appendix A (informative) adequacy and/or interoperability performance testing procedures 34
Annex B (informative) Examples of interoperability testing 39
References 42
Foreword
GB/T 29268 "Information technology - Biometric performance testing and reporting" is divided into the following seven sections.
--- Part 1. Principles and Framework;
--- Part 2. Test methods and technology scene evaluation;
--- Part 3. Modal specific tests;
--- Part 4. Interoperability performance testing;
--- Part 5. biometric access control system scene evaluation;
--- Part 6. Test methods of performance evaluation;
--- Part 7. biometric identification card alignment algorithm testing.
This section GB/T Part of 429,268.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with the international standard ISO /IEC 19795-4.2008 "Information technology - Biometric performance testing
And Part 4 of the report. Interoperability performance testing. "
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 26237.2-2011 Information technology - Biometric data interchange formats - Part 2. Finger minutiae data
(ISO /IEC 19794-2.2009, NEQ)
--- GB/T 26237.3-2011 Information technology - Biometric data interchange formats - Part 3. Finger pattern spectral data
(ISO /IEC 19794-3.2009, MOD)
--- GB/T 28826.1-2012 Information technology Utilities Biometric Exchange Formats Framework - Part 1. Data element Regulation
Fan (ISO /IEC 19785-1.2006, MOD)
Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents.
This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.
This section drafted by. China Electronics Standardization Institute, Beijing Institute of Computer Technology and Application.
The main drafters of this section. Yuan Li, Feng Jing, Huohong Wen, Geng force, Rasmussen, Wangzai Heng, Jin Qian, Qiaoshen Jie, Wang was sunny, Zheng Xiaoyuan, Liu Wenli.
Introduction
ISO /IEC 19794 "Information technology - Biometric data interchange format" has been the biometric data of the interoperable exchange Dien
A foundation. The standard is defined by an open container image, signal, characteristic data, and limit certain characteristics of the sample, while the implementation of the requirements
A party capable of handling a limited subset of all possible biometric sample collection, thereby improving interoperability performance. The sample is in line with
Fingerprint template standards embedded in the image data compression process ISO /IEC 19794-2 and ISO /IEC 19794-8. Only the same kind of format
Samples (some samples defined in ISO /IEC 19794 in the same part) can be interchanged.
In ISO /IEC JTC1/SC37 publicity before the data exchange standards, because dedicated instance is important, dedicated, with intellectual property rights
Product of the process, it is usually considered special recognition template may provide better performance than any possible criteria. For emerging standards whether
In question is competent. they encoded data (features, images, etc.) indicate whether we can achieve compared to proprietary solutions to match prospective
Correctness.
Secondly, interoperability, appear in the following applications, the standard data is generated by the different agencies and systems and matching. If a
The company's feature extraction processing subsystem collect samples to generate ISO /IEC 19794- × appropriate instance, the ratio of other companies
Subsystem can get the original than the company's own performance subsystems have it? A further problem is that third-party company's ability to successfully identify
Two different sources, and user registration sample samples.
This section defines the test to be described in detail by the absolute performance has become the standard format of biometric data, adequacy and interoperability,
In particular the standard ISO /IEC 19794 each section. However, due to the present standard exchange format usually cited reference only black box generation and make
To use, it is also applicable to other open standards. As described above to launch a conclusion that the test of success is based on low-level data elements
And basic accuracy and suitability of the above values, for example. in line with their own standards. Therefore, the requirements of compliance testing as a major test
section. This is a reference to the standard formal been published compliance testing or outline obtained. For example, ISO /IEC 19794-5 Face
Interoperability performance testing part of its application profile may reference marker images, and mark images on the contrary may depend on ISO /IEC
15444-1.
This section includes the following three types of tests.
--- Online. scenario testing that volunteers registered suppliers of products, followed by the use of supply-side authentication or identification tools for real and fake
try;
--- Offline. technical testing, the collected sample archive collection, no need to simulate specific application in accordance with the operating conditions of the collection, but input
To register for the party, verification or identification products for real and counterfeit attempts;
--- Mixed. the sample set in an attempt to simulate a particular application operating conditions collected online, then later offline processing.
In each case, interoperability testing is required to embed a standard exchange format for multiple samples generated above, exchange and comparison. If the biometric
Levy collection device identification, and/or object and device interaction is considered when there is a real impact on the intended application interoperability performance, fitness
Used in combination from the online test on the crowd gathered. If the typical sample set is already available (for example, passes the photo is converted into ISO /
IEC 19794-5 identify the instance), the appropriate use of off-line test. If the typical data collection is neither practical nor can a specific subsystem
When interoperability performance play a decisive role, offline testing may be appropriate, such as. feature extraction and/or features comparison.
In all tests, the interoperability test objects must be registered in one or more products, and verify one or more other products
Or identification. It should include the transaction as its own (I test) and as one or more other people (impostor test) objects. If there is
Big enough crowd, you can use an impostor crowd irrelevant. Because you need to try a variety of products and counterfeiting, online testing becomes more complex
Weight, mixed testing and offline testing allow for zero effect spoofing attempt.
Interoperability performance testing, the standard biometric data block (BDBs) generator J is suitable for testing or offline testing of mixed income
Sample set. In the case of each subsystem are in line with ISO /IEC 19794-2 under standard BDBs use than subsystems K, until
KJ2 verification or identification tests. Wherein, BDB may be an image, signal, or a standard template. Optional coding standard exchange format should allow the End
Full details of the encoding may be referred to by a normative ISO /IEC 24713-1 outline obtained. If the problem is in the format of the image, then
Using its subsequent internal template (usually proprietary), but this form shall be classified in the given format between two instances of a black box than
Of the concept.
Tests in this section are presented in ISO /IEC 19794- × the specific biometric identification format associated with interoperability a
General principle.
Information technology - Biometric performance testing and reporting
Part 4. Interoperability performance testing
1 Scope
This section GB/T 29268 specifies the requirements needed for the assessment.
Available performance --- the standard interchange format (SIF) consistent with the sample;
--- Available consistent performance and SIF sample exchange time;
--- Consistent with the SIF and proprietary data formats associated with the samples available properties;
--- SIF by quantifying the relative performance of a single product and cross-product performance obtained interoperability performance;
--- Available properties consistent with one or more SIF multi-sampling and multi-modal data;
--- Biometric acquisition device (BCD) interoperability performance.
In addition, this section.
--- Including the establishment of a set of interoperable procedures;
--- Defined using the device to test interoperability program;
--- Given measure of interoperability performance testing procedures.
This section applies to multi-party biometric system for testing methods and technical evaluation of the scene, the biometric data exchange format
Data format standards are consistent.
In addition, this section.
--- Can not be established biometric data interchange format compliance testing;
--- Not provide testing program for online data collection.
2 Standards Compliance
Interoperability testing if they meet the requirements of this Section 6,7,8,9 and Table 1 references GB/T 29268.2 provisions are met
This section.
Table 1 GB/T 29268.2 consistency
GB/T 29268.4 test structure GB/T 29268.2 consistency
Online (8.2.1.3) Chapter 7 (scenario evaluation)
Mixed (8.2.1.4) Chapters 6 and 7
Offline (8.2.1.2) Chapter 6 (Evaluation)
3 Normative References
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. Where undated references, the latest edition (including any amendments) applies to this document.
GB/T 29268.1-2012 Information technology - Biometric performance testing and reporting - Part 1. Principles and framework (ISO /
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29268.4-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29268.4-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29268.4-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29268.4-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|