|
US$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28946-2012: Mobile motorcycle safety technology inspection lane
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28946-2012 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Mobile motorcycle safety technology inspection lane
| Valid |
GB/T 28946-2012
|
PDF similar to GB/T 28946-2012
Basic data | Standard ID | GB/T 28946-2012 (GB/T28946-2012) | | Description (Translated English) | Mobile motorcycle safety technology inspection lane | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | R17 | | Classification of International Standard | 43.180 | | Word Count Estimation | 16,182 | | Quoted Standard | GB/T 191; GB 1589; GB 7947; GB/T 9239.1; GB/T 13306; GB/T 13563; GB/T 13564; GB 21861; JJG 688; JJG 745; JJG 910; JJG 1014 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the mobile security technology test line motorcycle terminology and definitions, classifications and models, requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to detect m | GB/T 28946-2012: Mobile motorcycle safety technology inspection lane---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mobile motorcycle safety technology inspection lane
ICS 43.180
R17
National Standards of People's Republic of China
Mobile Motorcycle Safety test line
Issued on. 2012-12-31
2013-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 rules.
This standard is run by the National Motor Vehicle Safety Testing Equipment Standardization Technical Committee (SAC/TC364) and focal points.
This standard was drafted. Shijiazhuang Huayan Transportation Technology Co., Ltd., Henan Institute of Metrology, Jiangxi Institute of Metrology,
Shanxi measurement supervision and verification tests, with high-tech zones in Zhuhai Machinery Co., Ltd., Beijing Institute of Metrology detection, measurement, Zhejiang
Academy of Sciences, the Ministry of Communications Highway Research Institute, Chengdu Chi Electronics Co., Ltd., China Testing Technology Research Institute, Liaoning Province measurement department
Graduate School.
The main drafters of this standard. Chen Nanfeng, Zheng Li, Dai Yingyun, white Min, Qiu left first, Liu Jiajing, Yan Jin, with Xiaoping, Liu Mei, Luo Fagui, Liu.
Mobile Motorcycle Safety test line
1 Scope
This standard specifies the terms and definitions of mobile security technology motorcycle detection line, and type classification, requirements, test methods, inspection regulations
Then, signs, packaging, transport and storage.
This standard applies to detect motorcycles (including three-wheeled motorcycle, sidecar, motorcycle, moped two) safety performance
Mobile technology motorcycle safety testing line (hereinafter referred to as motion detection line).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 1589 road vehicles outside dimensions, axle load limits and quality
Colors or digital ID GB 7947 conductor
GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test
GB/T 13306 signs
GB/T 13563 drum speedometer car inspection station
GB/T 13564 Drum Reaction automobile brake inspection station
GB 21861 motor vehicle safety inspection items and methods
JJG688 automobile exhaust gas tester
JJG745 vehicle headlight tester
JJG910 motorcycle wheel deviation tester
JJG1014 motor vehicle testing specific axis (wheel) load
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
By the device carrier, motorcycle safety testing equipment, lead plate, operating room, electrical control system, used for motorcycle safety technical
Can be detected movable test line.
3.2
Mobile technology motorcycle safety testing line mobiletwo-wheelmotorcyclesafetytechnologyinspectionlane
Detecting a motorcycle, two moped safety and technical performance of motion detection line.
3.3
Mobile Full model motorcycle safety testing line mobilealmodels motorcyclesafetytechnologyinspectionlane
Detecting three-wheeled motorcycle, sidecar, motorcycle, moped safety and technical performance two mobile test line.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28946-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28946-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28946-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28946-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|