| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28911-2012 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Vocabulary of drilling engineering for the petroleum and natural gas
| Valid |
GB/T 28911-2012
|
PDF similar to GB/T 28911-2012
Basic data | Standard ID | GB/T 28911-2012 (GB/T28911-2012) | | Description (Translated English) | Vocabulary of drilling engineering for the petroleum and natural gas | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E13 | | Classification of International Standard | 75.020 | | Word Count Estimation | 207,265 | | Regulation (derived from) | National Standards Bulletin 2012 No. 28 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the oil and gas drilling engineering -specific terminology. This standard applies to oil and gas drilling engineering fields, but also applies to other areas of the oil and gas industry. | GB/T 28911-2012: Vocabulary of drilling engineering for the petroleum and natural gas---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vocabulary of drilling engineering for the petroleum and natural gas
ICS 75.020
E13
National Standards of People's Republic of China
Oil and gas drilling engineering terminology
Issued on. 2012-11-05
2013-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
Drilling Subjects 1 2
Engineering geological conditions of drilling 3 6
4 pre-drilling project 12
5 drill 15
6 drilling equipment, tools and instruments 21
7 Drilling Technology 31
8 drilling parameter optimization 37
9 47 directional drilling
10 Coring Drilling 57
11 drilling and completion fluid 63
12 78 Oil and Gas Well Pressure Control
13 downhole drilling failure and treatment 89
14 cementing and completion 96
122 15 Oil drilling technology economy
16 126 Ocean Drilling Project
References 137
Index 139
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal points.
This standard was drafted. China University of Petroleum (East China), Shengli Petroleum Administration Drilling Technology Research Institute, China Oilfield Services Limited Shares
the company.
The main drafters of this standard. tube Chi Chuan, Liaohua Lin, SHI Yu Cai, Yan Xin new, yellow root furnace, Cao Jing type, HAN Zhi-yong, Chen Ting root, Zoude Yong,
Cheng distance, Liurui Wen, Zhang Weidong.
Oil and gas drilling engineering terminology
1 Scope
This standard specifies the oil and gas drilling project-specific terminology.
This standard applies to oil and gas drilling project in the field, also applies to other areas of the oil and gas industry.
2 drilling Subjects
2.1 Basic Concepts wells
2.1.1
Well wel
In the exploration and development of oil, gas and other underground resources for the purpose, in the formation of a cylindrical drilled perforations with a certain depth.
2.1.2
Wellhead welhead
Well the top open end.
2.1.3
Bottom welbottom
The bottom of the wells.
2.1.4
Wall welwal
Cylindrical inner wall of the wellbore.
2.1.5
Borehole welbore
Shaft
Wellbore
A well overall.
2.1.6
Well segment welsection
A section of the wellbore.
2.1.7
Naked eye openhole
Unused casing, screens and other measures of well packer segment.
2.1.8
Depth measureddepth
Sounding
Inclined deep
Transfer from disk (reference point) to the measured length of the well borehole axis between a measuring point.
|