|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2878.3-2017: Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2878.3-2017 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series)
| Valid |
GB/T 2878.3-2017
|
PDF similar to GB/T 2878.3-2017
Basic data | Standard ID | GB/T 2878.3-2017 (GB/T2878.3-2017) | | Description (Translated English) | Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.40 | | Word Count Estimation | 13,114 | | Date of Issue | 2017-05-12 | | Date of Implementation | 2017-12-01 | | Quoted Standard | GB/T 193; GB/T 197; GB/T 3103.1-2002; GB/T 3452.2-2007; GB/T 6031; GB/T 17446; GB/T 2878.2; GB/T 26143 | | Adopted Standard | ISO 6149-3-2006, MOD | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the dimensions, performance requirements and test procedures for metric and non-adjustable lightweight stud ends (L series) and O-rings. The maximum working pressure for the non-adjustable stud end of this standard is 40 MPa and the maximum working pressure for the adjustable stud end is 31.5 MPa. Permissible working pressure should be based on the stud end size, material, structure, working conditions and application conditions to determine. Only products that meet the size of this standard can not guarantee the required performance. The manufacturer shall perform the tests in accordance with the specifications contained in this standard to ensure that the components meet the specified performance. | GB/T 2878.3-2017: Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Connections for hydraulic fluid power.Ports and stud ends with metric threads and O-ring sealing.Part 3. Light-duty stud ends (L series)
ICS 23.100.40
J20
National Standards of People's Republic of China
Hydraulic drive connection
Oval with metric and O-ring seals
Spiral ends Part 3. Light stud ends (L series)
withmetricthreadsandO-ringsealing-Part 3. Light-dutystudends (Lseries)
[ISO 6149-3..2006, Connectionsforhydraulicfluidpowerandgeneraluse-
PortsandstudendswithISO 261metricthreadsandO-ringsealing-
Part 3. Dimensions, design, testmethodsandrequirementsfor
light-duty (Lseries) studends, MOD]
2017-05-12 release.2017-12-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 2878 "Hydraulic drive connection with metric and O-ring seal oil port and stud end" is divided into 4 parts.
- Part 1. Port;
- Part 2. Heavy - duty stud ends (S - series);
- Part 3. Light stud ends (L series);
- Part 4. Hex plugs.
This part is part 3 of GB/T 2878.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the re-drafting method to modify ISO 16149-3..2006 "for the hydraulic drive and general purpose stud end belt ISO 261
Oval and stud ends for metric and O-rings - Part 3. Dimensions, type, test method and technology for light (L series) stud ends
Technical requirements ".
The technical differences between this section and ISO 6149-3..2006 are as follows.
--- on the normative reference documents, this part made a technical differences in the adjustment to meet China's technical conditions, adjust the situation
Is reflected in Chapter 2, "normative reference documents", the specific adjustments are as follows.
Replace GB 261 (see Table 1) with GB/T 193 with international standard modifications;
• Replace ISO 965-1 with GB/T 197 with international standard modification (see Table 1);
Replace GB 6149-2 (see Table 1) with GB/T 2878.2 with international standard modification;
Replace GB 4759-1 (see Chapter 4) with GB/T 3103.1-2002 equivalent to the international standard;
• Replace ISO 48 with the equivalent GB/T 6031 with international standards (see Chapter 6);
Replace GB 5598 (see Chapter 3) with GB/T 17446 equivalent to the international standard;
Replace GB 1987 (see Chapter 7) with GB/T 26143 equivalent to the international standard.
--- Change the material of the stud from mild steel to carbon steel (see 5.1, ISO 6149-3..2006, 5.1).
--- Change the stud end marking requirements to recommendation (see Chapter 9, Chapter 9 of ISO 6149-3..2006).
This section makes the following editorial changes.
- the deletion of six footnotes in the international standard text narrative;
--- Table 3, Table 5, and Table 4 of this part are adjusted in Table 5, Table 4 and Table 3 of ISO 6149-3..2006 in the order of appearance;
--- The equivalent unit "bar" of the pressure in ISO 6149-3..2006 was deleted, leaving only "MPa".
This part is made by the China Machinery Industry Federation.
This part of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized.
This part is responsible for drafting units. Zhejiang Suqiang Ge Hydraulic Co., Ltd.
This part participates in the drafting unit. Haiyan Pipe Fitting Manufacturing Co., Ltd., Ningbo Guangtian Saikesi Hydraulic Co., Ltd., Panzhihua Iron and Steel Group Engineering Technology
Co., Ltd. Industrial Branch Hydraulic Annex Factory, Eaton Hydraulic (Ningbo) Co., Ltd.
The main drafters of this part. Luo Xuelong, Wu Jigang, Geng Zhixue, Zhu Xuchu, Liang Yong, Guan Baoping, Liang Enguo, Tang Hailong, Zhou Shunhua.
Introduction
In a hydraulic drive system, the power is transmitted and controlled by the pressurized fluid within the closed circuit. In general applications, the fluid (liquid
Or gas) can be delivered under pressure.
The hydraulic element is connected to the hard pipe or hose through the stud end of the threaded port with the pipe joint.
It is recommended that the newly designed hydraulic system and components be preferentially used with the threaded ports and stud ends of the GB/T 2878 series, as this series
The mouth and the stud ends are sealed with metric threads and O-rings. We hope to help you make a reasonable choice.
Hydraulic drive connection
Oval with metric and O-ring seals
Spiral ends Part 3. Light stud ends (L series)
1 Scope
This part of GB/T 2878 specifies the dimensions and performance of metric and non-adjustable lightweight stud ends (L series) and O-rings.
Summarize the test procedure.
The maximum working pressure for non-adjustable stud ends in accordance with this section is 40 MPa, which regulates the maximum working pressure for the stud end
Is 31.5MPa. Permissible working pressure should be based on the stud end size, material, structure, working conditions and application conditions to determine.
Products that meet the dimensions of this part are not guaranteed to meet specified performance. Manufacturers should follow the specifications contained in this section
To ensure that the components meet the specified performance.
Note 1. An effective number of tests are required to confirm the performance requirements of the pipe fittings made of carbon steel.
Note 2. This part applies to the fittings of GB/T 14034.1-2010 and ISO 8434-2 and the plugs of GB/T 2878.4. Related hose connector technology
For technical specifications see ISO 12151-4.
Note 3. This section of the introduction recommends a new design for the hydraulic drive port and stud end.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 193 Common thread diameter and pitch series (GB/T 193-2003, ISO 261..1998, MOD)
GB/T 197 Common thread tolerances (GB/T 197-2003, ISO 965-1..1998, MOD)
GB/T 3103.1-2002 Fasteners - Tolerances bolts, screws, studs and nuts (idtISO 4759-1..2000)
GB/T 3452.2-2007 O-shaped rubber seals for hydraulic applications - Part 2. Specification for appearance quality inspection (ISO 3601-3.
2005, IDT)
GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10 to 100 IRHD) (GB/T 6031-1998, idtISO 48.
1994)
GB/T 17446 fluid transmission system and component vocabulary (GB/T 17446-2012, ISO 5598..2008, IDT)
GB/T 2878.2 Hydraulic drive connection Port and stud ends with metric and O-ring seals Part 2. Heavy duty studs
(S series) (GB/T 2878.2-2011, ISO 6149-2..2006, IDT)
GB/T 26143 Hydraulic pipe joint test method (GB/T 26143-2010, ISO 19879..2010, IDT)
3 terms and definitions
GB/T 17446 Definitions and the following terms and definitions apply to this document.
3.1
Adjustable stud end adjustablestudend
When tightening the coupling nut, allow the fitting to adjust the direction to complete the connection of the stud end fitting.
Note. This type of stud end is mainly used for profiled pipe joints (such as. T-shaped, cross and elbow).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2878.3-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 2878.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2878.3-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2878.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|