|
US$434.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2877.2-2021: Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2877.2-2021 | English | 434 |
Add to Cart
|
4 days [Need to translate]
|
Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions
| Valid |
GB/T 2877.2-2021
|
PDF similar to GB/T 2877.2-2021
Basic data | Standard ID | GB/T 2877.2-2021 (GB/T2877.2-2021) | | Description (Translated English) | Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Word Count Estimation | 23,255 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 2877.2-2021: Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hydraulic two-port slip-in cartridge valves-Part 2.Mounting dimensions
ICS 23.100.50
J20
National Standards of People's Republic of China
Replace GB/T 2877-2007
Hydraulic two-way cover plate cartridge valve
Part 2.Installation and connection dimensions
(ISO 7368.2016, Hydraulicfluidpower-Two-port
Released on 2021-04-30
2021-11-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
GB/T 2877 "Hydraulic Two-way Cover Plate Cartridge Valve" is divided into the following four parts.
---Part 1.Graphical symbols;
---Part 2.Installation and connection dimensions;
---Part 3.Technical conditions;
---Part 4.Test method.
This part is Part 2 of GB/T 2877.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 2877-2007 "Hydraulic Two-way Cover Plate Cartridge Valve Installation and Connection Dimensions", and is consistent with GB/T 2877-2007
Compared with the editorial changes, the main technical changes are as follows.
---The maximum fillet radius R1 has been increased (see Chapter 4);
---Deleted the requirement on the identification of work pressure (see Chapter 7 of the.2007 edition);
---The tolerance of the diameter matching size of all valves and holes is changed from H8 to H7 (see Table 1~Table 16, Figure 1~Figure 16 of the.2007 edition);
---The minimum depth of threaded holes for fastening bolts has been modified from 1.5 times the bolt diameter to 1.8 times (see Table 1, Figure 1 of the.2007 edition);
--- Increased the maximum fillet radius allowed at the bottom of the cartridge valve mounting hole (see Chapter 6);
---The locating pin aperture of size 15 and size 16 is modified from ϕ9 to ϕ10 (see Table 15, Table 16, Figure 15 and Figure 16 of the.2007 edition);
---A groove for installing O-rings has been added to the cover of size 16 (see Figure 16).
The translation method used in this section is equivalent to ISO 7368.2016 "Hydraulic Transmission Two-way Cover Plate Type Cartridge Valve Mounting Hole".
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 131-2006 Product Geometric Technical Specification (GPS) Representation of surface structure in technical product documents (ISO 1302.
2002, IDT)
---GB/T 1804-2000 General tolerances The tolerances of linear and angular dimensions without tolerances (eqvISO 2768-1.1989)
---GB/T 3452.3-2005 Hydraulic and pneumatic O-shaped rubber sealing ring groove size (ISO 3601-2.1999, MOD)
---GB/T 3505-2009 Product Geometrical Technical Specification (GPS) Surface structure profile method terms, definitions and surface structure
Parameters (ISO 4287.1997, IDT)
---GB/T 14043-2005 Hydraulic drive valve mounting surface and cartridge valve hole identification code (ISO 5783.1995, IDT)
---GB/T 17446-2012 Fluid Power System and Components Vocabulary (ISO 5598.2008, IDT)
This section has made the following editorial changes.
---Modified the standard name.
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3).
Drafting organizations of this section. Shandong Taifeng Intelligent Control Co., Ltd., Ningbo Huaye Machinery Manufacturing Co., Ltd., Henan Pengli Technology Co., Ltd.
Co., Ltd., Xiamen Chengcan Industrial Equipment Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd.
The main drafters of this section. Wang Zhenhua, Wang Jinghai, Zhang Ce, Pi Kunlin, Pi Fengmei, Cao Qiaohui.
The previous releases of the standards replaced by this part are as follows.
---GB/T 2877-1981, GB/T 2877-2007.
Introduction
In the hydraulic system, the power is transmitted and controlled by the pressurized fluid in the closed circuit. Hydraulic valve is a typical element in hydraulic system
It controls the flow direction, pressure or flow of liquid in a closed circuit.
Hydraulic two-way cover plate cartridge valve
Part 2.Installation and connection dimensions
1 Scope
This part of GB/T 2877 specifies the geometrical specifications related to the installation and connection of hydraulic two-way cover plate cartridge valves (hereinafter referred to as cartridge valves).
Poor to ensure interchangeability.
This section applies to the installation and connection of hydraulic two-way cover plate cartridge valves for general industrial equipment.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
ISO 1302 Geometrical Product Specification (GPS) The representation of the surface structure in the technical product document [GeometricalProduct
Specifications(GPS)-Indicationofsurfacetextureintechnicalproductdocumentation]
ISO 2768-1 General tolerances Part 1.Tolerances of linear and angular dimensions without tolerances (Generaltolerances-Part 1.
Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)
ISO 3601-2 O-rings for fluid power systems-Part 2.Groove dimensions for general applications (Fluidpowersystems-
O-rings-Part 2.Housingdimensionsforgeneralapplications)
ISO 4287 Product Geometric Technical Specification (GPS) Surface Structure. Profile Method Terms, Definitions and Surface Structure Parameters
(GeometricalProductSpecifications(GPS)-Surfacetexture.Profilemethod-Terms,definitionsand
surfacetextureparameters)
ISO 5783 Hydraulic fluid power-Codeforiden-identification code for the mounting surface of the hydraulic transmission valve and the valve hole of the cartridge valve (Hydraulicfluidpower-Codeforiden-
tificationofvalvemountingsurfacesandcartridgevalvecavities)
ISO 5598 Hydraulic power systems and components-Vocabulary (Fluidpowersystemsandcomponents-Vocabulary)
3 Terms and definitions
The terms and definitions defined in ISO 5598 apply to this document.
The termbase for standardization maintained by ISO and IEC can be obtained from the following website.
4 symbols
The following symbols apply to this document.
a) A, B, X, Y, Z1 and Z2 identify the ports (in some cases it can be different from the following examples).
1) A. Oil inlet, working oil and oil outlet that vary with its position in the hydraulic circuit;
2) B. Oil inlet, working oil port, and oil outlet that vary with its position in the hydraulic circuit;
3) X. Pilot oil inlet;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2877.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 2877.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2877.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2877.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|