|
US$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28564-2012: Cabinets for electrotechnical and electronic equipment -- Modular design requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28564-2012 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Cabinets for electrotechnical and electronic equipment -- Modular design requirements
| Valid |
GB/T 28564-2012
|
PDF similar to GB/T 28564-2012
Basic data | Standard ID | GB/T 28564-2012 (GB/T28564-2012) | | Description (Translated English) | Cabinets for electrotechnical and electronic equipment -- Modular design requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K05 | | Classification of International Standard | 31.240 | | Word Count Estimation | 10,138 | | Quoted Standard | GB/T 3047.1-1995; GB/T 8582-2008; GB/T 19290.1-2003; GB/T 19290.2-2003; GB/T 19290.3-2008; GB/T 19290.4-2009; GB/T 19520.1-2007; GB/T 19520.2-2007 | | Regulation (derived from) | National Standards Bulletin No. 13 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the electrical and electronic equipment cabinet modular design of the general principles, SI units lower modulus, inch units Typical dimensions of the cabinet modular design of the reference point (origin), the application of two i | GB/T 28564-2012: Cabinets for electrotechnical and electronic equipment -- Modular design requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cabinets for electrotechnical and electronic equipment. Modular design requirements
ICS 31.240
K05
National Standards of People's Republic of China
Electrical and electronic equipment cabinet modular design requirements
requirements
Issued on. 2012-06-29
2012-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points.
This standard was drafted. Dongguan Dimai Industrial Equipment Co., million-controlled Group Ltd., Jiangsu Tianxiang Electric Co., Ltd., Coal
Electric Co., Ltd., Beijing Sifang Automation Co., Ltd., ZTE Corporation, Huawei Technologies Co., Ltd., State Grid Power
Force Academy, Guodian Nanjing Automation Co., Ltd., Cixi Qi State Electric Co., Ltd., Jiangsu Hong Kong Limited bin day, Xu relay
Gas Co., Ltd., Zhangjiagang City days more Electric Co., Ltd., Tianjin original Electric Co., Ltd. Wuhan-source electrical structure,
Xuchang smart grid equipment Test and Research Institute, Tianjin Electric Drive Design Institute.
The main drafters of this standard. Zeng, wood Sindh, Yang Bo, Zhong Jie, Xu Huayun, Zhangkai Guo Tian Heng, Wang Wei, Aijun Zhang real, Zhang Yu,
Wu Bei Jiang Guoqing, high Zhong Xi, Huang Ping, Zhao Jianming, Shen with chapter Songzong Xiang, Liu, Cai dimension.
Electrical and electronic equipment cabinet modular design requirements
1 Scope
This standard specifies the electrical and electronic equipment cabinet modular design of General, modulus SI units under typical ruler inch units under
Reference point inch cabinet modular design (origin), the application of two modulus size system in a cabinet is modular design sizes
Use and cabinets modular design tolerances.
This standard applies to electrical and electronic equipment cabinet (hereinafter referred to as "cabinets") of modular design.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3047.1-1995 height of 20mm hex panels, rack and cabinets Series of basic dimensions
GB/T 8582-2008 term structural mechanical electrical and electronic equipment
Mechanical structures for electronic equipment modulo sequence Part 1 Development of GB/T 19290.1-2003. Generic specification
GB/T 19290.2-2003 development of electronic equipment - Part 2 isomer mechanical structure number sequence mode. Sectional specification set 25mm
Interface coordination dimensions of equipment isomer
GB/T 19290.3-2008 development of mechanical structures modulo sequence electronic equipment - Part 2-1 isomer. Sectional specification 25mm
Interface coordination dimensions size device isomers of cabinets and racks of detailed specification
GB/T 19290.4-2009 mechanical structures - Part 2-2 modulo sequence electronics isomer Development. specification 25mm
Interface coordination dimensions equipment practice detailed specifications Dimensions plug-in box, chassis, backplanes, panels and plug-ins
GB/T 19520.1-2007 electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size - Part 1. surface
Plate and frame
GB/T 19520.2-2007 electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size - Part 2. Machine
Cabinet and rack structures from
3 Terms and Definitions
Terms and definitions GB/T 8582-2008 defined apply to this document.
4 General
4.1 Cabinet is the performance of one form of electrical and electronic equipment mechanical properties of the structure of the product, its modular design requirements from mechanical electrical and electronic equipment
Standards structure, and modular design electrical and electronic equipment from the mechanical structure of the GB/T 19290.1-2003, GB/T 19290.2-
2003, GB/T 19290.3-2008, GB/T 19520.1-2007, GB/T 19520.2-2007 and GB/T 3047.1-1995. This standard
It is the basis of these criteria requires integrated modular design for further description of the properties of this product Cabinet objects.
Note. The so-called cabinet product attributes, namely the cabinet as a commodity available to the user by the manufacturer.
4.2 provisions cabinet modular design, according to a modular system that is designed to provide relevant engineering applications (such as plug-in box, plug-ins,
PCB, electrical components, electronic components, instruments, equipment, rooms, buildings, etc.) mechanical interface, installation size compatibility and interchangeability.
Note. The modular design and modular design are synonymous.
|