|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2852-2008: Ball-bearing die sets for stamping dies
Status: Valid GB/T 2852: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2852-2008 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Ball-bearing die sets for stamping dies
| Valid |
GB/T 2852-2008
|
| GB/T 2852.1-1990 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Ball slide die sets for press tools--Diagonal pillar sets
| Obsolete |
GB/T 2852.1-1990
|
PDF similar to GB/T 2852-2008
Basic data | Standard ID | GB/T 2852-2008 (GB/T2852-2008) | | Description (Translated English) | Ball-bearing die sets for stamping dies | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 13,198 | | Date of Issue | 2008-04-10 | | Date of Implementation | 2008-10-01 | | Older Standard (superseded by this standard) | GB/T 2852.1-1990; GB/T 2852.2-1990; GB/T 2852.3-1990; GB/T 2852.4-1990 | | Quoted Standard | GB/T 70.1; GB/T 2856.1; GB/T 2856.2; GB/T 2861.3; GB/T 2861.8; GB/T 2861.10; GB/T 2861.11; GB/T 2861.16 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.5 (Total No.118) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the rolling guide die mold structure, dimensions and markings. This standard applies to rolling guide die cast mold. | GB/T 2852-2008: Ball-bearing die sets for stamping dies---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ball-bearing die sets for stamping dies
ICS 25.120.30
J46
National Standards of People's Republic of China
Replacing GB/T 2852.1 ~ 2852.4-1990
Die mold rolling guide
Posted 2008-04-10
2008-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 2852.1-1990 "die mold diagonal scrolling guide pillar sets", GB/T 2852.2-1990 "dies
Mold intermediate rolling guide pillar sets ", GB/T 2852.3-1990" die mold rolling guide 4 post mold "and
GB/T 2852.4-1990 "die mold rolling guide the rear pillar sets" consolidated amendments.
This standard and GB/T 2852.1-1990, GB/T 2852.2-1990, GB/T 2852.3-1990 and GB/T 2852.4-
Compared to 1990, the main changes are as follows.
--- The standard name be changed to "die mold rolling guide";
--- Added "preface" and "normative references";
--- Intermediate pillar formwork structures and sizes made major changes;
--- All mold structure diagram limiter process is increased.
This standard by the National Standardization Technical Committee proposed die.
This standard by the National Standardization Technical Committee mold (SAC/TC33) centralized.
This standard was drafted. Guilin Electrical Apparatus Research Institute, Zhenjiang Chuanshan mold factory Hangzhou Xiaoshan precision mold standard factory, Guilin Electronics Division
Technical University.
The main drafters of this Standard. Weng Zhen history, Qi Wei root, Zhang Yuqin, Liao Wang Yi, Feng double.
This standard replaces the standards previously issued as follows.
--- GB 2852.1 ~ 2852.3-1981;
--- GB/T 2852.1 ~ 2852.4-1990.
Die mold rolling guide
1 Scope
This standard specifies the die mold rolling guide structure, dimensions and marking.
This standard applies to the die cast mold rolling guide.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T in the 70.1 hexagon socket head cap screws
GB/T 2856.1 rolling guide die holder dies - Part 1. punch holder
GB/T 2856.2 die rolling guide die holder 2 parts. the lower die
GB/T 2861.3 Part 3 die guide. rolling guide pillar
GB/T 2861.8 Part 8 die guide. rolling guide bushings
GB/T Part 10 2861.10 die guides. Ball retainer
GB/T Part 11 2861.11 die guides. cylindrical helical compression spring
GB/T Part 16 2861.16 die guide. plate
JB/T 8050 Die mold technical conditions
|