|
US$559.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2851-2008: Sliding guide die sets for stamping dies
Status: Valid GB/T 2851: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2851-2008 | English | 559 |
Add to Cart
|
5 days [Need to translate]
|
Sliding guide die sets for stamping dies
| Valid |
GB/T 2851-2008
|
| GB/T 2851.1-1990 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Sliding guide die sets for press tools--Diagonal pillar sets
| Obsolete |
GB/T 2851.1-1990
|
PDF similar to GB/T 2851-2008
Basic data | Standard ID | GB/T 2851-2008 (GB/T2851-2008) | | Description (Translated English) | Sliding guide die sets for stamping dies | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 24,225 | | Date of Issue | 2008-04-10 | | Date of Implementation | 2008-10-01 | | Older Standard (superseded by this standard) | GB/T 2851.1-1990; GB/T 2851.3-1990; GB/T 2851.4-1990; GB/T 2851.5-1990; GB/T 2851.6-1990; GB/T 2851.7-1990 | | Quoted Standard | GB/T 2855.1; GB/T 2855.2; GB/T 2861.1; GB/T 2861.3; JB/T 8050 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.5 (Total No.118) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the sliding guide die mold structure, dimensions and markings. This standard applies sliding guide die cast mold. | GB/T 2851-2008: Sliding guide die sets for stamping dies---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sliding guide die sets for stamping dies
ICS 25.120.30
J46
National Standards of People's Republic of China
Replacing GB/T 2851.1-1990, GB/T 2851.3 ~ 2851.7-1990
Sliding guide die mold
Posted 2008-04-10
2008-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 2851.1-1990 "die mold slide guide diagonal pillar sets", GB/T 2851.3-1990 "dies
Sliding rear side mold guide pillar sets ", GB/T 2851.4-1990" Sliding guide die mold narrow rear side pillar-shaped mold "
GB/T 2851.5-1990 "Sliding guide die mold intermediate pillar sets", GB/T 2851.6-1990 "die mold slide guide
Intermediate circular pillar mold "and GB/T 2851.7-1990" die mold slide guide 4 post mold "consolidated amendments.
This standard and GB/T 2851.1-1990, GB/T 2851.3-1990, GB/T 2851.4-1990, GB/T 2851.5-1990,
GB /and GB/T 2851.7-1990 compared to T 2851.6-1990 main changes are as follows.
--- The standard name be changed to "die mold slide guide";
--- Added "preface" and "normative references";
--- Delete the contents of the rear side of a narrow pillar-shaped mold frame;
--- Intermediate pillar formwork structures and sizes made major changes.
This standard by the National Standardization Technical Committee mold (SAC/TC33) and focal points.
This standard was drafted. Guilin Electrical Apparatus Research Institute, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan mold factory, electronic Guilin Branch
Technical University.
The main drafters of this Standard. Weng Zhen history, Zhang Yuqin, Qi Wei root, Liao Wang Yi, Feng double.
This standard replaces the standards previously issued as follows.
--- GB 2851.1 ~ 2851.7-1981;
--- GB/T 2851.1-1990, GB/T 2851.3 ~ 2851.7-1990.
Sliding guide die mold
1 Scope
This standard specifies the sliding guide die mold structure, dimensions and marking.
This standard applies to the sliding guide die cast iron mold.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2855.1 die slide die - Part 1. punch holder
GB/T 2855.2 sliding guide die holder dies - Part 2. the lower die
GB/T 2861.1 Part 1 die guide. slide guide pillar
GB/T 2861.3 Part 3 die guides. Slide guide bushings
JB/T 8050 Die mold technical conditions
3 Dimensions
3.1 pairs of diagonal pillar sets
Diagonal pillar mold structure and dimensions shown in Figure 1, Table 1.
1 --- punch holder;
2 --- lower die;
3 --- pillar;
4 --- guide sleeve.
1 diagonal pillar sets
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2851-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2851-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 2851-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2851-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 2851-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2851-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|