HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 281-2013 English PDF

US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 281-2013: Rolling bearings -- Self-aligning ball bearings -- Boundary dimensions
Status: Valid

GB/T 281: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 281-2013English209 Add to Cart 3 days [Need to translate] Rolling bearings -- Self-aligning ball bearings -- Boundary dimensions Valid GB/T 281-2013
GB/T 281-1994English319 Add to Cart 3 days [Need to translate] Rolling bearings--Self-aligning ball bearings--Boundary dimensions Obsolete GB/T 281-1994
GB 281-1984English239 Add to Cart 2 days [Need to translate] Rolling bearings--Self-aligning ball bearings--Boundary dimensions Obsolete GB 281-1984

PDF similar to GB/T 281-2013


Standard similar to GB/T 281-2013

GB/T 274   GB/T 283   GB/T 275   GB/T 273.1   

Basic data

Standard ID GB/T 281-2013 (GB/T281-2013)
Description (Translated English) Rolling bearings -- Self-aligning ball bearings -- Boundary dimensions
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J11
Classification of International Standard 21.100.20
Word Count Estimation 9,924
Older Standard (superseded by this standard) GB/T 281-1994
Quoted Standard GB/T 272-1993; GB/T 273.3-1999; GB/T 274-2000; GB/T 6930-2002; GB/T 9160.1-2006; JB/T 2974-2004
Regulation (derived from) National Standards Bulletin No. 19 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies: meet GB/T 273. 3-1999-aligning ball bearings and tight sets aligning ball bearings (hereinafter referred to as the bearings) Dimensions. This standard applies to: aligning ball bearings the design and selection.

GB/T 281-2013: Rolling bearings -- Self-aligning ball bearings -- Boundary dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings.Self-aligning ball bearings.Boundary dimensions ICS 21.100.20 J11 National Standards of People's Republic of China Replacing GB/T 281-1994 Rolling aligning ball bearings Dimensions Issued on. 2013-09-18 2014-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 281-1994 "Rolling aligning ball bearing dimensions." Compared with GB/T 281-1994, except Editorial changes, the major technical changes are as follows. --- Increased by 39 and 30 series bearing dimensions (see Tables 1 and 3); --- Expanding the 02 series bearing size range (see Table 4 and Table 2 of the 2006 edition); --- Increasing the bearing structure diagram and model sides with a ring of the bearing (see Figure 4 and Figure 5, Table 5 and Table 7). --- Remove the old code control (see the 1994 edition of Appendix A). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of Rolling (SAC/TC98) centralized. This standard was drafted. Luoyang Bearing Research Institute Co., Ltd., Xiangyang Automobile Bearing Co., Ltd. The main drafters of this standard. Guobao Xia, Long Chunmei. This standard replaces the standards previously issued as follows. --- GB 281-1964, GB 281-1984, GB/T 281-1994; --- GB 282-1964, GB 282-1981, GB 282-1987. Rolling aligning ball bearings Dimensions

1 Scope

This standard specifies the line with GB/T 273.3-1999 self-aligning ball bearings and with adapter sleeve aligning ball bearings (hereinafter referred to as bearing) Dimensions. This standard applies to self-aligning ball bearing design and selection.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 272-1993 Rolling Code Method GB/T 273.3-1999 Rolling bearings dimensions, general plan GB/T 274-2000 Rolling maximum chamfer dimensions GB/T 6930-2002 Rolling Words GB/T 9160.1-2006 Rolling accessories - Part 1. Taper Bush Supplementary Provisions JB/T 2974-2004 Rolling Code Method

3 Terms and Definitions

Terms and definitions GB/T 6930-2002 defined apply to this document.

4 Symbol

The following symbols apply to this document. Unless otherwise indicated, numerical symbol Figs. 1 to 5 shown in Table 1 to Table 7 and shown expressed nominal size. NOTE. Graphics only example of the structure. B. Bearing width D. Bearing outside diameter d. bearing bore d1. inner diameter of the adapter sleeve r. bearing inner and outer ring chamfer dimensions rsmin. r smallest single chamfer dimension

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 281-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 281-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 281-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 281-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 281-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 281-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.