|
US$1969.00 · In stock
Delivery: <= 11 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28029.12-2020: Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28029.12-2020 | English | 1969 |
Add to Cart
|
11 days [Need to translate]
|
Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN)
| Valid |
GB/T 28029.12-2020
|
PDF similar to GB/T 28029.12-2020
Basic data | Standard ID | GB/T 28029.12-2020 (GB/T28029.12-2020) | | Description (Translated English) | Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | S70 | | Classification of International Standard | 45.060 | | Word Count Estimation | 106,185 | | Date of Issue | 2020-03-06 | | Date of Implementation | 2020-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 28029.12-2020: Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electronic railway equipment--Train communication network (TCN)-Part 3-4. Ethernet Consist Network (ECN)
ICS 45.060
S70
National Standards of People's Republic of China
Rail Transit Electronic Equipment Train Communication Network (TCN)
Part 3-4. Ethernet Marshalling Network (ECN)
(IEC 61375-3-4..2014, MOD)
Released on 2020-03-06
2020-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms, definitions, abbreviations and conventions 2
3.1 Terms and definitions 2
3.2 Acronyms 3
3.3 Convention 6
4 General part 7
4.1 Overview 7
4.2 Architecture 7
4.3 Data type 10
4.4 Functions and Services 12
4.5 Redundancy 12
4.6 Quality of service 14
4.7 IP address and related definitions 16
4.8 IP address and network configuration management 17
4.9 Network device interface 19
4.10 Terminal device interface 25
4.11 Gateway functions 28
4.12 Network management 29
5 Conformance testing 29
Appendix A (informative appendix) ECN architecture reliability and availability comparison 30
Appendix B (Informative Appendix) Network Address Translation (R-NAT) for Rail Transit 40
Appendix C (Normative Appendix) Transceiver Protocol Definition with Signal Amplification 44
Appendix D (Informative Appendix) Trapezoid Topology Protocol Definition 52
References 98
Foreword
GB/T 28029 "Train Communication Network (TCN) for Rail Transit Electronic Equipment" is divided into the following 12 parts.
--- Part 1. Basic structure;
--- Part 2-1. Stranded Train Bus (WTB);
--- Part 2-2. Conformance Test of Wire Train Bus (WTB)
--- Part 2-3. TCN Communication Protocol;
--- Part 2-4. TCN Application Specification;
--- Part 2-5. Ethernet Train Backbone (ETB);
--- Part 2-6. Vehicle-ground communication;
--- Part 2-7. Radio-based Wireless Train Backbone Network (WLTB);
--- Part 3-1. Multifunctional Vehicle Bus (MVB);
--- Part 3-2. Multi-function vehicle bus (MVB) conformance test;
--- Part 3-3. CANopen Marshalling Network (CCN);
--- Part 3-4. Ethernet Marshalling Network (ECN).
This part is part 3-4 of GB/T 28029.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the redrafting method to modify the adoption of IEC 61375-3-4..2014 "railway electronic equipment train communication network (TCN)
Part 3-4. Ethernet Marshalling Network (ECN).
Compared with IEC 61375-3-4..2014, there are technical differences between this part and the terms involved in these differences have been passed on the outside margin.
The vertical single line (|) in the white position is marked. The specific technical differences and the reasons are as follows.
--- With regard to normative quotation documents, this part has been adjusted with technical differences to adapt to China's technical conditions and adjustments
The situation is reflected in Chapter 2 "Regulatory Reference Documents", with specific adjustments as follows.
● Removed ISO /IEC 7498, ISO /IEC 8824;
● Replace IEC 61156-6 with GB/T 18015.6 equivalent to international standards (see Table 12, 4.9.4.2, Table 14);
● Replace ISO /IEC 11801 with GB/T 18233 equivalent to international standards (see Table 12, 4.9.4.2, Table 14,
4.10.2.2);
● Replace IEC 61375-1 with GB/T 28029.1 modified to adopt international standards (see 3.3, 4.2.2, 4.3, 4.11.1);
● Replace IEC 61375-2-1 with GB/T 28029.2 modified to adopt international standards (see 3.1, 4.12.2, Chapter 5);
● Replace IEC 61375-2-5 with GB/T 28029.6 modified to adopt international standards (see 4.6.2, 4.7.2, 4.7.3, 4.11.2,
4.12.3, Chapter 5);
● IETFRFC768, IETFRFC791, IETFRFC792, IEC 61375-3-4..2014 references
IETFRFC793, IETFRFC826, IETFRFC1918, IETFRFC2236, IETFRFC2365, IETF
RFC3022, IETFRFC3203, IETFRFC3376, IETFRFC4541 are adjusted to normative references, to
Meet the requirements of GB/T 1.1 (see Chapter 2).
--- Deleted the terms and definitions defined in GB/T 28029.2, and directly quoted GB/T 28029.2.
--- Added the term and definition of "group switch" (see 3.1.12);
--- The note in Chapter 5 of IEC 61375-3-4..2014 is adjusted to the main text because it contains requirements.
This section also made the following editorial changes.
--- Added the table number and table title of Table 8 and Table 9;
--- Adjusted some column numbers (see D.1, D.3.2.3.2).
This part is proposed by the State Railway Administration.
This part is under the jurisdiction of the National Technical Committee for Standardization of Traction Electrical Equipment and Systems (SAC/TC278).
This section was drafted by. CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., China Railway Science Research Institute Group Co., Ltd. rolling stock
Research Institute, CRRC Changchun Rail Bus Co., Ltd., CRRC Qingdao Sifang Locomotive Co., Ltd., CRRC Zhuzhou Electric Locomotive have
Limited company, CRRC Nanjing Puzhen Vehicle Co., Ltd.
The main drafters of this section. Xiao Jiabo, Hao Bo, Li Shenlong, Li Bo, Liu Tai, Zhou Ande, Wu Wenhui, Chen Meixia.
Introduction
The TCN general architecture (see GB/T 28029.1) defines a two-layer network structure. a train backbone network and a marshalling network. The hierarchical structure provides
Based on different technologies such as MVB, CANopen and ECN, they can be connected to the same train backbone network. Based on not
ECNs of the same design and implementation can be interfaced to the same train backbone network, which ensures interoperability between marshalling networks of different implementations.
The general part of this part of GB/T 28029, namely Chapter 1 ~ Chapter 4, defines all ECN implementations, terminal equipment and gateways common
Requirements and specifications.
This general part defines.
--- Data communication interface of terminal equipment connected to ECN;
--- ECN provides functions and services to terminal equipment;
--- Gateway function for data transmission between train backbone network and ECN;
--- ECN performance.
Rail Transit Electronic Equipment Train Communication Network (TCN)
Part 3-4. Ethernet Marshalling Network (ECN)
1 Scope
This part of GB/T 28029 specifies the intra-group data communication network based on Ethernet technology, namely the Ethernet group network (ECN).
The application of this part can realize the interoperability of the equipment in each vehicle in the open train.
If the supplier agrees with the user through consultation, this section may also apply to closed trains and multi-unit trains.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 18015.6 Pair or star twisted multi-core symmetrical cable for digital communication. Part 6. With 600MHz and below transmission characteristics
Sectional Specification for Symmetrical Twisted or Star Twisted Symmetrical Cable Work Area Cabling Cables (GB/T 18015.6-2007, IEC 61156-6..2002,
IDT)
GB/T 18233 General cabling for information technology user buildings (GB/T 18233-2008, ISO /IEC 11801..2002,
IDT)
GB/T 28029.1 Rail Transit Electronic Equipment Train Communication Network (TCN) Part 1. Basic Structure (GB/T 28029.
1-2020, IEC 61375-1..2012, MOD)
GB/T 28029.2 Rail Transit Electronic Equipment Train Communication Network (TCN) Part 2-1. Stranded Train Bus (WTB)
(GB/T 28029.2-2020, IEC 61375-2-1..2012, MOD)
GB/T 28029.6 Rail Transit Electronic Equipment Train Communication Network (TCN) Part 2-5. Ethernet Train Backbone Network
(ETB) (GB/T 28029.6-2020, IEC 61375-2-5..2014, MOD)
IEC 61076-2-101 Product requirements for connectors for electronic equipment. Part 2-101. Circular connectors with thread locking
Detailed specifications of M12 connectors (Connectorsforelectronicequipment-Productrequirements-Part 2-101.
Circularconnectors-DetailspecificationforM12connectorswithscrew-locking)
IEC 61076-3-104 Connector product requirements for electrical and electronic equipment Part 3-104. Frequency at.2000MHz and below
Detailed specifications of 8-way unshielded and fixed connectors for data transmission (Connectorsforelectricalandelectronicequip-
ment-Productrequirements-Part 3-104. Detailspecificationfor8-wayshieldedfreeandfixedconnec-
torsfordatatransmissionswithfrequenciesupto2000MHz)
IEC 62439 (all parts) Industrial communication network high availability automation network (Industrialcommunication
networks-Highavailabilityautomationnetworks)
ANSIX3.263..1995 Information Technology Optical Fiber Distributed Data Interface Token Ring Twisted Pair Physical Layer Depends on Media [EN-Infor-
mationTechnology-FibreDistributedDataInterface (FDDI) -TokenRingTwistedPairPhysical
LayerMediumDependent (TP-PMD) (ordernumberANSIINCITS263)]
IEEE802.1D IEEE local area network and metropolitan area network standard media access control bridge [IEEEStandardforLocalandmet-
ropolitanareanetworks-MediaAccessControl (MAC) Bridges]
IEEE802.1Q IEEE LAN and metropolitan area network standard virtual bridged LAN (IEEEStandardforLocalandmet-
ropolitanareanetworks-VirtualBridgedLocalAreaNetworks)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28029.12-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 28029.12-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 7 ~ 11 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28029.12-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28029.12-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|