|
US$599.00 · In stock Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27824-2011: Chemicals -- Test method of acute inhalation toxicity -- Fixed concentration procedure Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27824-2011 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Chemicals -- Test method of acute inhalation toxicity -- Fixed concentration procedure
| Valid |
GB/T 27824-2011
|
PDF similar to GB/T 27824-2011
Basic data | Standard ID | GB/T 27824-2011 (GB/T27824-2011) | | Description (Translated English) | Chemicals -- Test method of acute inhalation toxicity -- Fixed concentration procedure | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A80 | | Classification of International Standard | 13.300; 11.100 | | Word Count Estimation | 26,281 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-08-01 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the chemical concentration of acute inhalation toxicity test method fixed definitions of terms and acronyms, test principles, test methods, test data and reports. This standard applies to chemicals fixed concentration of acute inhalation toxicity tests. |
GB/T 27824-2011: Chemicals -- Test method of acute inhalation toxicity -- Fixed concentration procedure ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemicals. Test method of acute inhalation toxicity. Fixed concentration procedure
ICS 13.300; 11.100
A80
National Standards of People's Republic of China
Toxicity Test Methods for a fixed concentration of chemicals Acute inhalation
procedure
Issued on. 2011-12-30
2012-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 terms, definitions and abbreviations 1
3 Test principle 2
4 Test Method 2
5 Data and Reporting 7
Appendix A (normative) Test Scheme 8
References 20
Figure A.1 steam pre-test flow chart 8
Figure A.2 flowchart vapor official test 10
Figure A.3 dust/mist pre-test flow chart 12
Figure A.4 dust/mist official test flow chart 14
Figure A.5 flowchart 16 pre-test gas
Figure A.6 formal test gas flow chart 18
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The Standards and Organisation for Economic Co-operation and Development (OECD) Chemicals testing guidelines No.433 (2004) "acute inhalation toxicity test fixture
Concentration method "(in English) is consistent technical content.
This standard configuration and do the following editorial changes.
--- Increasing the range a chapter;
--- The OECDNo.433.2004's "Introduction" section incorporated this standard "Introduction" section;
--- The OECDNo.433.2004 "preliminary considerations" section incorporated standard "4.3 Test Procedure";
--- The OECDNo.433.2004 "Appendix. Definitions" as part of the standard "2 terms, definitions and abbreviations";
--- Change the unit of measure of legal units of measurement.
This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points.
This standard was drafted. Chinese Center for Disease Prevention and Control of Occupational Health and Poison Control, Ningbo Inspection and Quarantine Institute of Science and Technology,
Jiangsu Coal Chemical Engineering Research and Design Institute Limited.
The main drafters of this standard. Hou Fenxia, \u200b\u200bChao-lin, Ma Zhongchun, Guo Xinyu, Chen Xiaoqing, then Long Hao, Lin Zhenxing.
Introduction
Basis of scientific and animal welfare requirements, requiring regular testing of chemicals OECD guidelines be modified. The initial acute suck
The toxicity test guidelines (OECD403) was adopted in 1981. Revised acute oral toxicity test. Fixed Dose Method
(FixedDoseProcedure, FDP) (OECD420) since the implementation in December 2001, began to consider should be established for acute inhalation toxicity test
A fixed concentration of test method (FixedConcentrationProcedure, FCP). The methods using several fixed concentrations of exposure, using a single sex
Do animals (generally use a female) to detect acute inhalation toxicity.
The traditional method is based on the evaluation of acute toxicity animal death as the only endpoint. 1984 British Society of Toxicology (BTS) mention
Out of a new acute toxicity test method, that is, choose a fixed dose of the test substance exposure [1]. This method avoids the animal death as
Endpoint, but in a few fixed-dose dose of obvious symptoms of end point, this dose was also tested
Toxicity grading basis. This test also using the above method. To achieve the OECD guidance document [2] on the end point of the humanitarian requirements, construction
Proposed test method optimized to minimize animal suffering, to minimize the use of animals. After mathematical model to evaluate
FCP test statistically rationality [3].
Test procedures and results interpretation of the norms regarding FCP inhalation toxicity test requirements see acute inhalation toxicity test guideline
File [4].
This test can provide hazard characteristics of the test substance. For can cause acute toxicity of the test substance, according to the results of the tests, according to the Joint
Global Harmonized System of Chemical Classification mark the country (GHS) for the test substance toxicity grading and classification [5].
Toxicity Test Methods for a fixed concentration of chemicals Acute inhalation
1 Scope
This standard specifies the chemical concentration of the test method for acute inhalation toxicity fixed definitions of terms and abbreviations, principles of testing, test methods,
Test data and reports.
This standard applies to the acute inhalation toxicity of chemicals fixed concentration of the test.
2 terms, definitions and abbreviations
2.1 Definition of Terms
The following terms and definitions apply to this document.
2.1.1
Acute inhalation toxicity acuteinhalationtoxicity
Short-time interruption after inhalation of harmful effects of air generated by the test substance.
2.1.2
Aerosol aerosol
Solid particles or liquid droplets suspended in the gas formed in the suspension, such as liquid or gaseous foam, paste or powder.
2.1.3
Dust dust
Capable of being suspended in the air or a mixture of solid particulate matter from the formation. With irregular shapes, from less than 1μm to 100μm
Range.
2.1.4
Fog mist
Suspended in the air by the size of 2μm ~ 100μm ranging from tiny droplets of a substance or mixture. Supersaturated vapor may be condensed,
Or travel by the mechanical shear rate of the liquid, such as spraying, atomizing, spraying or foaming.
2.1.5
Steam vapour
At room temperature and atmospheric pressure in the gaseous state or a liquid substance or mixture of solid formed.
2.1.6
Concentration concentration
Mass per unit volume of air in the test substance. Vapor and dust often in mg/L, gas places mL/m3, said the United Nations
Consistent with GHS system representation.
2.1.7
Significant toxicity evidenttoxicity
Significant toxicity performance [6] after an infected animal, if higher fixed concentration exposure, most of the animals are expected to be significant pain
Bitter, dying state [7] and even death.
2.1.8
Moribund impendingdeath
Animals dying or death may state in the observation period has not ended. Rodent dying symptoms include convulsions, lateral,
Recumbency and tremors [7].
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27824-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 27824-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27824-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27824-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|