|
US$134.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27797.9-2011: Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27797.9-2011 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC
| Valid |
GB/T 27797.9-2011
|
PDF similar to GB/T 27797.9-2011
Basic data | Standard ID | GB/T 27797.9-2011 (GB/T27797.9-2011) | | Description (Translated English) | Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 7,777 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-08-01 | | Quoted Standard | ISO 527-4; ISO 1172; ISO 1268-1; ISO 1268-4 | | Adopted Standard | ISO 1268-9-2003, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use reinforced thermoplastic sheet (GMT/STC) molded test plates prepared by a method. The prepared test panel laminates for processing measuring mechanical and physical properties of the sample. This method is applicable to a thermoplastic resin matrix, glass fiber, carbon fiber, aramid, or other fiber reinforced material (reinforcing material may be used alone or in combination, in a form that is suitable molded) by molding a laminated sheet. GB/T 27797 and this part of GB/T 27797. 1 used together. | GB/T 27797.9-2011: Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fibre-reinforced plastics Methods of producing test plates Part 9. Moulding of GMT/STC
ICS 83.120
Q23
National Standards of People's Republic of China
Reinforced plastics test plates Preparation
Part 9. GMT/STC molding
Part 9. MouldingofGMT/STC
(ISO 1268-9.2003, IDT)
Issued on. 2011-12-30
2012-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 27797 "fiber reinforced plastics test plates Preparation" is divided into 11 parts.
--- Part 1. General;
--- Part 2. the contact and injection molding;
--- Part 3. wet molding;
--- Part 4. prepreg molding;
--- Part 5. Filament winding;
--- Part 6. Pultrusion molding;
--- Part 7. resin transfer molding;
Part --- Article 8. SMC and BMC molding;
Part --- Article 9. GMT/STC molding;
--- Part 10. BMC and other long-fiber molding plastic injection molding and general principles common specimen molding;
--- Part 11. BMC and other long-fiber molding plastic injection molding small square pieces.
This section GB/T Part of 927,797.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 1268-9.2003 (E) "fiber reinforced plastics test plates preparation methods - Part 9.
GMT/STC molding. "
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB /1040.4-2006 Plastics Determination of tensile properties - Part 4 T. isotropic and orthotropic fiber-reinforced
Strong Composites Test conditions (ISO 527-4.1997, IDT);
--- Plastic resin content test methods (ISO 1172.1996, MOD) GB/T 2577-2005 glass fiber reinforced;
--- GB/T 27797.1 fiber reinforced plastic plate test preparation methods - Part 1. General (ISO 1268-1.2001, IDT);
--- GB/T 27797.4 fiber reinforced plastics test plates Preparation - Part 4. prepreg molding (ISO 1268-4.
2005, IDT).
This part made the following editorial changes.
--- Some of the statements apply to international standards to apply to our standard formulation;
--- In Chapter 6, Article No. 10.2, 10.3 and Canada.
This part is proposed by the China Building Materials Federation.
The fiber-reinforced plastic part by the National Standardization Technical Committee (SAC/TC39) centralized.
This section is drafted. Beijing glass Composite Material Co., Ltd., China North Industries Group fifty-three Institute, Changzhou Tianma Group has
Limited.
The main drafters of this section. Jane even Ning, Ma Yujing, Zhengsu Ping, Xuan Weidong, Zhang Liping.
Reinforced plastics test plates Preparation
Part 9. GMT/STC molding
1 Scope
This section GB/T 27797 specifies the method reinforced thermoplastic sheet (GMT/STC) molding prepared test panels. Prepared
Test panels for measuring a sample processing laminates mechanical and physical properties. This method is applicable to thermoplastic resin matrix, glass fiber,
Carbon fiber, aramid fiber or other reinforcing material (reinforcing materials may be used alone or in combination, the form should be suitable for molding) by molding
Molded laminates.
GB/T 27797 and this part of GB/T 27797.1 used together.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of ISO 527-4 Tensile Properties of Plastics Part 4. isotropic and anisotropic fiber reinforced plastic composite material testing
Condition (Plastics-Determinationoftensileproperties-Part 4. Testconditionsforisotropicandorthotro-
picfibre-reinforcedplasticcomposites)
ISO 1172 Textile glass fiber reinforced plastic prepreg, molding compounds and laminates glass fibers and inorganic mineral filler content
Burning Determination Act (Textile-glass-reinforcedplastics-Prepregs, mouldingcompoundsandlaminates-De-
terminationofthetextile-glassandmineralfilercontent-Calcinationmethods)
ISO 1268-1 fiber reinforced plastics test plates preparation methods - Part 1. General (Fibre-reinforcedplastics-
Methodsofproducingtestplates-Part 1. Generalconditions)
ISO 1268-4 fiber reinforced plastics test plates Preparation - Part 4. prepreg molding (Fibre-reinforced
plastics-Methodsofproducingtestplates-Part 4. Mouldingofprepregs)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
GMT
Industrial universal glass mat reinforced thermoplastic sheet Abbreviation where thermoplastics usually refers to polypropylene.
3.2
STC
Any kind of thermoplastic composite material sheet reinforced Abbreviation, regardless of the type or polymer reinforcing material form.
4 Health and Safety
See ISO 1268-1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27797.9-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 27797.9-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27797.9-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27797.9-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|