HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 27547-2011 English PDF

US$1389.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27547-2011: Elevating work platforms -- Mast-climbing work platforms
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 27547-2011English1389 Add to Cart 10 days [Need to translate] Elevating work platforms -- Mast-climbing work platforms Valid GB/T 27547-2011

PDF similar to GB/T 27547-2011


Standard similar to GB/T 27547-2011

GB/T 24818.4   GB/T 23724.1   GB/T 24809.2   GB/T 27545   GB/T 27546   GB/T 27545   

Basic data

Standard ID GB/T 27547-2011 (GB/T27547-2011)
Description (Translated English) Elevating work platforms -- Mast-climbing work platforms
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J80
Classification of International Standard 53.020.99
Word Count Estimation 63,699
Date of Issue 2011-11-21
Date of Implementation 2012-05-01
Quoted Standard GB/T 3480.5; GB/T 3811; GB 4208; GB 5226.1; GB 8898; GB 14048.5-2008; GB/T 15706.2-2007; GB/T 16855.1-2008; GB/T 20863.1; GB/T 22437.1; GB 23821; ISO 6336-1; ISO 6336-2; ISO 6336-3; ISO 13854; EN 614-1; EN 953; EN 982
Adopted Standard ISO 16369-2007, MOD
Regulation (derived from) Announcement of Newly Approved National Standards No. 18 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the guides climbing work platform specific safety requirements, MCWP by manual or power-operated, temporarily installed, can carry a person or persons to engage in operations of the device. This standard also applies to water durability installed MCWP. This standard applies to the MCWP, through its operating platform to enhance the drive system, and through the guide bracket orientation and movement. Guides and independent support structure can be set or not set between the lateral support. Meanwhile, the standard of the MEWP, for a combination of any of the following optional Type: Single guides or guides, has no attachment attached to the support or support, fixed height guides or variable height guides, vertical guide shelf or the vertical tilt 0 �� ~ 30 �� of the guides, standing or hanging leader, mobile or fixed chassis (chassis or chassis), manual or power lifting, dragged at the workplace or on its own, do not need to meet the requirements of the road traffic rules, by an electric, pneumatic, hydraulic or engine driven. This standard does not apply to IS0 16368 Mobile elevating work platform (MEWP), comply with EN 1808 heights job basket conform EN 1570 and the lifting platform.

GB/T 27547-2011: Elevating work platforms -- Mast-climbing work platforms

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Elevating work platforms - Mast-climbing work platforms ICS 53.020.99 J80 National Standards of People's Republic of China Elevating work platform guide frame climbing work platform (ISO 16369.2007,MOD) Released on.2011-11-21 2012-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Issued by China National Standardization Administration

Table of contents

Foreword Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Hazard list 6 5 Safety requirements and/or measures 9 5.1 Structure and stability calculation 9 5.2 General rules for equipment, chassis, chassis and guides 16 5.3 Work platform 18 5.4 Lifting drive system 20 5.5 Measures to prevent over-speed descent of operating platforms 24 5.6 Measures for emergency lowering or lifting of operating platforms 25 5.7 Overload/over torque protection device 26 5.8 Electrical system 27 5.9 Internal combustion engine drive system 28 5.10 Hydraulic system 28 5.11 Special requirements for safety devices and overload/over-torque detection devices that rely on auxiliary circuits 29 5.12 Limit switch 29 5.13 Control device 29 6 Requirements and/or measures for safety verification of the new MCWP 29 6.1 Design review 29 6.2 Practical test 30 7 Information provided 31 7.1 Manual 31 7.2 Sign 36 Appendix A (informative appendix) Structural calculation 37 Appendix B (Normative Appendix) Special requirements for multi-level operating platforms 52 Appendix C (Normative Appendix) Electrical and electronic requirements for overload detection devices 54 Appendix D (informative appendix) Changes in the number of clauses and figures of this standard compared with ISO 16369.2007 56 Appendix E (informative appendix) Technical differences between this standard and ISO 16369.2007 and their reasons 57 References 58

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify and adopt ISO 16369.2007 "Elevating work platform guide frame climbing work platform". Compared with ISO 16369.2007, the numbering of clauses and diagrams in this standard has changed. Appendix D lists this standard and ISO 16369.2007 comparison list of chapters and chart number changes. Compared with ISO 16369.2007, this standard has technical differences, and the clauses related to these differences have been passed after the outer margins. The set vertical single line (|) is marked. Appendix E gives the technical differences between this standard and ISO 16369.2007 and their reasons. List. This standard has made the following editorial changes. ---The national preface and preface of ISO 16369.2007 have been deleted, and the preface of this standard has been added; ---Chapter 1 has been modified as follows. Change the "Note" in the scope of ISO 16369.2007 to "Note 1", and change the scope of ISO 16369.2007 Replace paragraphs 5, 6, and 7 with "Note 2"; replace paragraphs 2, 3 and 4 in the scope of ISO 16369.2007 with one paragraph; ---ISO 13852 has been replaced by ISO 13857, and ISO 13857.2008 has been equivalently transformed into my country's national standard GB/T 23821- 2009, included in the normative reference documents; ---According to the requirements of GB/T 1.1-2009, 6.2.2.4.4 adds an introduction; --- According to the requirements of GB/T 1.1-2009, 7.1.2 delete the suspension section; ---Added Appendix D (informative appendix) "Changes in the number of clauses and charts of this standard compared with ISO 16369.2007"; --- Added Appendix E (informative appendix) "Technical differences between this standard and ISO 16369.2007 and their reasons". This standard was proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Lifting Work Platforms (SAC/TC335). The organization responsible for drafting this standard. Beijing Institute of Construction Mechanization. Participated in the drafting of this standard. China Academy of Building Research Branch of Construction Mechanization, Hangzhou Saiqi Aerial Work Machinery Co., Ltd. Company, Shanghai Institute of Building Research Co., Ltd., Shenzhen Huace Testing Technology Co., Ltd., Langfang Kaibo Construction Machinery Technology Co., Ltd. Company, Liaoning Institute of Safety Science, Zhejiang Dingli Machinery Co., Ltd., Jiangsu Shenxi Construction Machinery Co., Ltd., Boyu (Wuxi) Technology Co., Ltd., Guangdong Yuhuaxing Construction Machinery Manufacturing Co., Ltd., Tianjin Xianghe Machinery Co., Ltd., Xiamen Compaq Machinery Co., Ltd. Division, Guangzhou Jinglong Construction Machinery Co., Ltd. The main drafters of this standard. Yang Guodong, Wang Donghong, He Zhenchu, Chen Jianping, Chen Aihua, Zhu Ping, Zhao Penghua, Xu Shugen, Yu Huiye, Gao Zhipeng, Gao Mingmin, Huang Jialiang, Lan Rongbiao, Liu Yuejin, Mu Minghao, Zhang Huawen, Wu Jie, Yin Wenjing, Sun Hongyan, Niu Yajing. Elevating work platform guide frame climbing work platform

1 Scope

This standard specifies the special safety requirements of the guide frame climbing work platform (hereinafter referred to as MCWP). MCWP is made by manual or power Operate, temporarily installed, equipment that can carry one or more people for work. Note 1.The vertical moving parts (work platforms) are also used to transport staff, equipment and materials to or from a certain construction location. These terms make MCWP is different from construction hoist. Note 2.This standard distinguishes the hazards caused by the different stages of the equipment during the service life, and explains the elimination or reduction of these hazards and safe use Methods. This standard does not specifically specify how to handle the process of handling, installing or dismantling, fixing or removing any materials or equipment that are not part of this MCWP The requirements for the hazards caused by the above, there is no special provision for the method of handling special hazardous materials. This standard does not specifically stipulate the requirements for transporting personnel and materials to fixed landings. For such facilities, please refer to elevators or construction elevators and other related standard. This standard also applies to permanently installed MCWP. For MCWP to which this standard applies, its operating platform is carried out through the drive system Lift, guide and move through guide frame. The guide frame and the independent support structure can be provided with or without lateral support. At the same time, this standard The MEWP in, applies to any of the following optional combinations. ---Single guide frame or multiple guide frame; ---With or without attached support; ---Fixed height guide frame or variable height guide frame; ---Vertical guide frame or a guide frame inclined 0°~30° from the vertical direction; ---Standing or hanging guide frame; ---Mobile or fixed underframe (chassis or underframe); ---Manual or power boost; --- Tow or drive on the work site without meeting the requirements of road traffic regulations; ---Driven by electric, pneumatic, hydraulic or internal combustion engine. This standard does not apply to mobile elevating work platforms (MEWP) complying with ISO 16368, and high-altitude working baskets complying with EN1808 And the lifting platform conforming to EN1570.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 3480.5 Calculation of load-carrying capacity of spur gears and helical gears Part 5.Strength and quality of materials (GB/T 3480.5- 2008, ISO 6336-5..2003, IDT) GB/T 3811 Crane Design Code GB 4208 enclosure protection grade (IP code) (GB 4208-2008, IEC 60529.2001, IDT) GB 5226.1 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical conditions (GB 5226.1-2008, IEC 60204-1.2005, IDT) GB 8898 audio, video and similar electronic equipment safety requirements (GB 8898-2001, eqvIEC 60065.1998) GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1.Control circuit appliances and switch components electromechanical

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27547-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27547-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27547-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27547-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.