| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27526-2011 | English | RFQ |
ASK
|
3 days [Need to translate]
|
PROFIBUS profile for process control devices
| Valid |
GB/T 27526-2011
|
PDF similar to GB/T 27526-2011
Basic data | Standard ID | GB/T 27526-2011 (GB/T27526-2011) | | Description (Translated English) | PROFIBUS profile for process control devices | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N10 | | Classification of International Standard | 25.040 | | Word Count Estimation | 274,232 | | Date of Issue | 2011-11-21 | | Date of Implementation | 2012-03-01 | | Quoted Standard | GB/T 19892.1-2005; GB/T 20540.5-2006; GB/T 20540.6-2006; GB/Z 25105.1-2010; IEC 60751-2008; IEC 61784-1-2007; ANSI TIA/EIA 485A-1998; PNO/TC3-04-0006; PNO/TC3-05-0002A; PNO/TC3-99-0019; PNO/TC3-04-0007A | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 18 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides for the operation, commissioning, maintenance and diagnostics of basic equipment set of parameters, and the realization by the user groups and device manufacturers coherence mechanisms defined parameters. This standard applies to process control (eg: chemical, food, water/wastewater treatment, power plants and basic industries) used in the transmitter, valve, binary, equipment and other devices. This standard specifies the PROFIBUS process control equipment line rules into two categories: A class and B class. Class A Line regulation describes the simple device of common parameters, its scope is limited to the operational phase of the basic functions. The basic set consists of a measurement value status of process variables (for example | GB/T 27526-2011: PROFIBUS profile for process control devices---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
PROFIBUS profile for process control devices
ICS 25.040
N10
National Standards of People's Republic of China
PROFIBUS process control device profiles
Issued on. 2011-11-21
2012-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅺ
Introduction Ⅻ
1 Scope 1
2 Normative references 1
3 Terms and definitions, abbreviations, conventions 2
3.1 Terms and definitions 2
3.2 Abbreviations 4
3.3 Conventions 5
4 Process Control Equipment 6 consistency profiles
6 5 General requirements
6 5.1 Technical Overview
5.2 Standard parameters and object 11
5.3 Status of process variables and diagnostics 51
5.4 Parameter handling 76
Version 5.5 Device identification and compatibility 89
5.6 parameter encoding 95
5.7 Declaration of Conformity 117
6 Bank Regulation to PROFIBUS DP mapping 118
Target 118 6.1
6.2 Technical Overview 118
6.3 communication profile 130
6.4 Ident_Number automatically adapt 141
6.5 profiles define specific communication 153
6.6 GSD file name 154
6.7 GSD file 154
6.8 Declaration of Conformity 155
7 single device data transmitter 156
7.1 Additional parameters Parameter Description of the physical block 156
7.2 Analog Input Function Block 156
7.3 accumulator function block 163
7.4 Conversion block 170
7.5 Declaration of Conformity 206
8 discrete input device data list 207
8.1 physical block parameter description 207 additional parameters
8.2 Discrete Input Function Block 207
8.3 Conversion block 211
8.4 Declaration of Conformity 212
9 Discrete output device data sheet 213
9.1 physical block parameter description 213 additional parameters
9.2 Discrete Output function block 213
9.3 Conversion block 220
9.4 Declaration of Conformity 225
10 actuator device data sheet 225
10.1 physical block parameter description 225 additional parameters
10.2 Analog Output function block 225
10.3 conversion block 234
Download the order parameter 246 10.4
10.5 Declaration of Conformity 246
11 Analytical Instruments device data sheet 247
11.1 model using function blocks analytical instruments field device 247
11.2 additional physical parameters block 248
11.3 Analysis of conversion block 249
11.4 conversion conversion block 252
11.5 Conversion control block 255
11.6 Limits conversion block 262
11.7 --- binary conversion block alarm alert status 265
More than 11.8-point sampling block 269
11.9 log archiving function blocks --- 272
11.10 Declaration of Conformity 275
Common function set more than 12 variable device 275
13 Identification and Maintenance Functions (IM) 276
13.1 Overview 276
13.2 Parameter Description 277
13.3 Declaration of Conformity 281
References 282
Figure 1 in a layered architecture ISO /OSI model of the Bank Regulation (rough frame) integration Ⅻ
Figure 2 Bank gauge structure 5
Figure 3 PROFIBUSPA standard text structure 6
Figure 4 device model 7
Diagram 5, block parameters between 7 and directory
Figure 6 device grouping variables/parameters 8
FIG. 7 by reference to the channel number conversion block 9
Reference Figure 8 channels of 10
Consistency layer structure of FIG. 9 in parameter 10
Figure 10 The parameter structure 36
11 references the directory structure and block 38
Parameters 12 Table 39
Numerical flow and concentrate status application 13 61
Timing Diagram Figure 14 MAN Model 72
Figure 15 simulation timing diagram 73
Parameter handling state Figure 16 single buffer device 88
Parameter handling state Figure more than 17 of the buffer device 88
Figure 18 PROFIBUS Integration Technology 89
Up 19 devices and device drivers between/backward compatibility interpretation 90
Compatibility Rule 20 device drivers and equipment 94
Version 21 shows an example of processing information 95
22 applications to justice in row cycles/acyclic data transmission map 119
Figure 23 a PB, a FB, TB to a two slot map 120
Figure 24 a PB, a FB, TB to map multiple three slots 121
Figure 25 a PB, a plurality of FB, a plurality of grooves mapped to several TB 121
26 a PB, map two FB, three TB and a link object 122
Figure 27 a FB loop parameter mapping input data frame 122
More than 28 FB loop parameter map to the input frame data, maps output data frame 123
Relationship between block parameters and device management directories between FIG. 29, 124
Parameter Overview Figure 30 Analog Input Function Block 156
Simulation, model and condition of FIG. 31 a block diagram of the analog input function block 156
Diagram 32 AIFB parameters 157
33 patterns and health conditions generate 157
34 analog input function block state machine 158
35 illustrates the use of the analog input function block parameters 161
36 calibration parameters Description 163
Parameter Overview Figure 37 accumulator function block 164
38 accumulator function block diagram block 164
39 accumulator state machine function block 165
FIG. 40 defined measurement device 171
Figure 41 temperature conversion function blocks 172
Figure 42 Pressure Transducer Block 181
Figure 43 Sensor Calibration 182
Figure 44 Pressure Transducer Block function. Pressure 182
45 pressure transducer blocks Function. Flow 183
Figure 46 Pressure Transducer Block Function. Level 183
Figure 47 Flow. 184 square root function
Figure 48 function blocks 189 level converter
49 level calibration transfer function 189
Figure 50 linearization function diagram 190
Application example Figure 51. Radar Level 190
Figure 52 Application example. Hydraulic Level 190
Figure 53 Application example. Capacitive Level 191
54 a functional block diagram flow conversion block 196
Parameter 55 discrete input function block 207
Simulation, mode and status 56 discrete input function block diagram block 207
FIG. 57 is generated pattern generation and health conditions of 208
58 state of the discrete input function block 208 machine
Parameter 59 discrete output function block 213 summary
Figure 60 Simulation Discrete Output function block mode and condition of FIG. 214
Conditions Figure 61 pattern generation and generated 214 status
Figure 62 Status Discrete Output function block 215 machine
Parameter 63 Analog Output function block 225 summary
Mode Figure 64 Analog Output function block diagram and simulation 226
Parameter graph 65 analog output function block 226
FIG. 66 is generated pattern generation and health conditions of 227
Figure 67 Analog Output state machine function block 227
Block diagram analysis equipment 68 247
Chart 69 Conversion parameter analysis block 250
Figure 70 controls the conversion block, block transform conversion, analysis and collaboration between the conversion block Analog Input Function Block Example 253
71 control parameter hierarchy conversion block 255
72 control transfer state block diagram --- COMMAND parameter 259
Figure 73 Hierarchy alarm information 265
74 alarm parameter structure conversion block 266
Figure 75 multi-point sampling block 269
Figure 76 Status Log function block parameters 273 --- COMMAND
Table 1 describes the view object 14
Table 2 bit string (Bit String) to a string octet (Octet String) map 14
Table 3 enumeration encoding 15
Table 4 table of the elements (Block) structure 15
Parameters Table 5 (Block) description of the structure 16
Table 6 Physical block. Block_Object, Class 16 and Parent_Class coding
Table 7 blocks. Block_Object, Class 17 and Parent_Class coding
Table 8 conversion block. Block_Object, Class 18 and Parent_Class coding
Table 9 encoding profiles 19
Table 10 Value status - Floating Point (Value Status-Floating Point) 19 table element structure
Table 11 Value Status - Discrete (Value Status-Discrete) structural elements Table 19
Table 12 Status value - parameter discrete (Value Status-Discrete) description of the structure 20
TABLE 13 elements scaling (Scaling) Table 20 Structure
TABLE 14 elements Mode (Mode) Table 20 Structure
TABLE 15 elements floating point alarm (Alarm Float) Table 21 Structure
Parameters Table 16 floating-point alarm (Alarm Float) description of the structure 21
Table 17 alarm summary (Alarm Summary) element table structure 21
Table 18 coded alarm summary (Alarm Summary) structure of each 22-bit
Table 19 alarm summary (Alarm Summary) configuration bit stream coding 22
Parameters (Alarm Summary) Table 20 Structure of alarm summary description 22
TABLE 21 elements function block chaining (FBLinkage) Table 23 Structure
Table 22 Simulation - floating point elements (Simulation-Floating Point) 23 table structure
Table 23 Simulation - floating point parameters (Simulation-Floating Point) description of the structure 23
Table 24 Simulation - Discrete element (Simulation-Discrete) Table 24 Structure
Table 25 element results (Result) Table 24 Structure
Parameters (Result) Table 26 describes the results of structure 24
Table 27 element measurement range (Measurement Range) Table 24 Structure
TABLE 28 elements of binary messages (Binary Message) Table 25 Structure
Parameters Table 29 binary messages (Binary Message) description of the structure 25
Table 30 Sample selection element (SampleSelection) Table 26 Structure
Parameters Table 31 Sample Select (SampleSelection) description of the structure 26
Table 32 log (Log book) structural elements Table 26
Parameters Table 33 log (Log book) description of the structure 26
TABLE 34 elements precomputed (Precalculation) Table 27 Structure
Parameters Table 35 precomputed (Precalculation) description of the structure 27
Table 36 Sequence Control (Sequential Control) element table structure 28
Table 37 Sequence Control (Sequential Control) parameter description of the structure 28
Elements Table 38 Batch (Batch) Table 28 Structure
Parameters Table 39 Batch (Batch) description of the structure 29
Table 40 element characteristics (Feature) Table 29 Structure
Table 41 support feature (Supported) encoding 29
Table 42 feature is enabled (Enabled) encoding 30
Table 43 conversion element diagnostic event (Diag_Event_Switch) Table 30 Structure
Table 44 conversion element diagnostic event (Diag_Event_Switch) description of the structure 31
Table 45 diagnostic status link (Diag_Status_Link) 32-bit encoded byte
Parameters Table 46 Parameter Description 32 standard
Table 47 standard parameters Parameter Properties 35
Table 48 standard parameters view objects 35
Table 49 loading sequence table 39
Parameter Description Table 50 Table 41 processing parameters
Parameter property sheet processing parameters in Table 51 44
Parameters Table 52 describes the physical block 44
Table 53 Physical Properties parameter block 48
Table View object physical blocks 54 49
Table 55 Access Protection 50
Table 56 linked object Parameter Description 51
Table 57 Status (Status) 51-byte encoding
Table 58 Invalid status values \u200b\u200b53
Table 59 reserved status values \u200b\u200b53
Table 60 bad - sensor failure, over-limit (BAD-sensor failure, low limited) 54
Table 61 bad - sensor failure, over-limit (BAD-sensor failure, high limited) 54
Table 62 good (non-cascade) - active warning alarm, over limit (GOOD (Non-Cascade) -active advisory alarm,
lowlimited) 54
Table 63 good (non-cascade) - active warning alarm, over limit (GOOD (Non-Cascade) -active advisory alarm, high
limited) 55
Table 64 good (non-cascade) - effective emergency alarm, over limit (GOOD (Non-Cascade) -active critical alarm, low
limited) 55
Table 65 good (non-cascade) - effective emergency alarm, over limit (GOOD (Non-Cascade) -active critical alarm, high
limited) 55
Table 66 good (non-cascade) - update event (GOOD (Non-Cascade) -update event) 55
Table 67 priority condition value 55
Table 68 is defined status values \u200b\u200b57
Table 69 physical block encoding parameters DIAGNOSIS 59
Table 70 parameters DIAGNOSIS bit string encoding 60
Table 71 Availability PCS/DCS values \u200b\u200bin 61
Table 72 for maintenance purposes of interpretation 62
Table 73 gauge type and result of the health 63
Table 74 process gauge impact on the situation of 63
Table 75 NAMURNE107 predetermined condition coded 63
Table 76 in the condition as well (GOOD) when functional check/update event (Limit Checks/Update Events) encoding 64
Table 77 has concentrated coded status details 64
Table 78 describes 66 has concentrated condition of details
Table 79 Status Priority 68
Table 80 Health and Diagnostics Enabling concentrated conditions 69
The relationship between the physical block table 81 and function blocks 69
Table 82 Enable concentrated condition, the physical coding block parameters DIAGNOSIS 70
Table 83 fail-safe mechanism for input function block assigned status 74
Table 84 Use of health status concentrated Totalizer function block is calculated 74
Parameters Table 85 Parameter Description handle 77
Table 86 Parameter attributes Parameter Handling 78
Availability depends on the processing status table 87 (PTA_STATUS) process value processing 78
Function definition table 88 process parameters 79
Parameter handling buffer status table 89 supports a single mechanism of the device Table 79
Parameter handling state table 90 multi-buffer support mechanism of the device Table 83
Table 91 Ident_Number Parameter Description 90
Parameter Description Table 92 device parameters 92
Table 93 Parameter Description Device driver parameters 92
Table 94 Effect of Rule 93 of the device version parameter
Example 93 Table 95 set Dev_Rev
Table 96 Unit Code 95
Table 97 material code 116
Table 98 exist Conformance Statement 117
Conformance Statement Table 99 Device Management 118
Table 118 Declaration of Conformity 100
Conformance Statement Table 101 profiles characteristic 118
Table Parameter Properties 102 device management 124
103 unit table (Slot1, Index0) data type 125
Table 104 composite list of directory entries (Slot1 fixed; Index1; the first one and the first two directory entries) 125
Table 105 composite list of directory entries (Slot1 fixed; Index1; 3rd and 4th directory entries) 125
Table 106 Composite directory entries (Slot1 fixed; Index1; 5th and 6th directory entries) 126
Table 107 Composite directory entries (Slot1 fixed; Index1; 7th and 8th directory entries) 126
Header (Slot1; Index0) Table 108 127
Table 109 composite list of directory entries (Slot1; Index1) 127
Table 110 Composite directory entries (Slot1; Index1) 127
Header table 111 (Slot1; Index0) 127
Table 112 composite list of directory entries (Slot1; Index1) 127
Table 113 Composite directory entries (Slot1; Index2, new parameters) 128
Table 114 seventh and eighth complex directory entries 128
Header table 115 (Slot1; Index0) 128
Table 116 composite list of directory entries (Slot1; Index1) 128
Table 117 Composite directory entries (Slot1; Index2, new parameters) 128
Table 118 7,8,9 composite directory entries 129
Header (Slot1; Index0) Table 119 129
Table 120 composite list of directory entries (Slot1; Index1) 129
Composite list of directory entries table 121 with optional 129 Begin_LO
Composite table directory entries Section 122 of 5,6,7 directory entries (Slot1; Index2, new parameters) 129
Table 9, 10 composite 123 directory entries 130
Table 11 Compound 124 of 130 directory entries
Table 125 DPV1 response code 130
Table 126 Cycle parameters identified 133
Configuration string table 127 function blocks 133
Multivariable device identification table 128 format structure 135
Table over 129 equipment variable coding identification format 135
Definition table 130 FB code 135
Variable format table identifies more than 131 equipment modules 135
Table 132 User_Prm_Data 137 definitions of DPV1_Enable
Table 133 profiles specific Prm_Structure 137
The mapping table 134 DIAGNOSIS Diagnosis-RES-PDU service data structure 138
Table 135 Status appearance/disappearance 139
Parameter value table 140 of 136 Initiate
Additional features 137 MSCY1S table used 142
Table 138 modified MSCY1S state transitions 143
Table 139 profiles specific Ident_Number classification 153
Table 140 communication capabilities Declaration of Conformity 155
The conditions and results of calculation of the actual pattern table 141 158
The conditions and results output parameter condition table 142 calculated 158
Table 143 analog input function block Parameter Description 159
Table parameter attributes 144 analog input function block 161
View object table 145 analog input function block 162
The conditions and results of calculation of the actual pattern table 146 165
Standard condition table 147 TOTAL Parameter Calculation conditions and results 166
Parameters Table 148 accumulator function block description 167
Parameter property sheet 149 accumulator function block 169
150 accumulator table view object function blocks 170
Block temperature conversion table 151 Universal Parameter Description 173
Parameters Table 152 thermocouple temperature conversion device description block 175
Table 153 RTD temperature conversion device block Parameter Description 175
Table 154 optical pyrometer temperature conversion device block Parameter Description 176
Parameter property sheet 155 general parameters of temperature transducer block 177
156 thermocouple device attribute table parameters Additional parameters 178
Thermal resistance parameter attribute table 157 additional device parameters 178
Table 158 Parameter attributes optical pyrometer Additional equipment parameters 179
View object temperature conversion table 159 block 179
Table 160 pressure transducer block Parameter Description 184
Table 161 pressure transducer block parameter attributes 186
View object table 162 pressure transducer block 188
Table 163 dynamic variable pressure equipment allocated 189
Table 164 Level transducer block Parameter Description 191
Table parameters property 165 level converter block 193
View object table 166 Level Transducer Block 195
Table 167 flow converter device block parameter overview 197
Parameters Table 168 flow converter block description 198
Parameter attribute table 169 flow converter block 200
Table View object 170 flow converter block 203
Flow conversion table 171 block View_3 object 204
Category Table 172 flow converter block 205
173 dynamic variables allocation table 206
Conformance Statement Table 174 transmitter assembly 206
The conditions and results of calculation of the actual pattern table 175 208
The conditions and results Table 176 Status output parameter calculation 209
Parameters Table 177 discrete input function block description 209
Parameter property sheet 178 discrete input function block 210
Table View object 179 discrete input function block 211
Table 180 discrete input transducer block Parameter Description 211
Table 181 discrete parameters input into block 212 properties
Table View object 182 Discrete Input Transducer Block 212
Conformance Statement Table 183 discrete input module 213
The conditions and results of calculation of the actual pattern table 184 215
The conditions and results Table 185 Status output parameter calculation 216
The conditions and results table 186 cascade process condition calculation 216
Parameters Table 187 Discrete Output function block description 217
188 Discrete Output attribute table parameters of the function block 218
Table View object 189 Discrete Output function block 218
Table parameters CHECK_BACK code 190 discrete output FB 219
Table 191 Discrete valve control transducer block Parameter Description 220
Table 192 Parameter attributes discrete control switching valve block 222
View object table 193 converts the discrete valve control block 224
Conformance Statement Table 194 discrete output module 225
The conditions and results of calculation of the actual pattern table 195 228
The conditions and results Table 196 Status output parameter calculation 228
Statement of conditions and the results of calculation processing 197 Cascade 229
Table 198 Analog Output function block Parameter Description 229
Table Parameter Properties 199 231 Analog Output function block
View object table 200 Analog Output function block 232
Table 201 Analog output FB parameters CHECK_BACK code 233
Table 202 actuator transducer block Parameter Description 234
Table 203 actuator 238 blocks conversion parameters property
View object table 204 converts electric actuator block 240
Table 205 - The actuator parameter attributes gas conversion block 243
Table 206 - The View object gas conversion actuator block 245
Table 207 actuator assembly 246 Declaration of Conformity
Table 208 additional physical block parameters Parameter Description 248
Table 209 additional physical parameter attribute block parameters 249
Table View object physical blocks 210 249
Parameters Table 211 analysis converter block description 250
Parameter attribute table 212 analysis converter block 251
213 conversion table view object analysis block 252
Parameters Table 214 describes the shift converter block 252
Table 215 transformation parameters to convert properties to the block 254
216 conversion table view object into block 254
Table 217 control conversion block Parameter Description 256
Table 218 analytical instruments for executing functions 259
Table 219 control conversion parameters block 260 properties
220 control conversion table view object block 261
Parameters Table 221 limit transducer block description 263
Parameter attribute table 222 limits the conversion block 263
View object table 223 limits the conversion block 264
Parameters Table conversion block 224 alarm description 266
Mapping table 225 to STATUS_CLASSES class status array element 268
Parameter property sheet 226 alarm conversion block 268
227 conversion table view object alarm block 269
Datasheets more than 228-point sampling function block description 2...
|