|
US$499.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27431-2023: Conformity assessment - Guidelines on methods of intermediate checks for measuring equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27431-2023 | English | 499 |
Add to Cart
|
5 days [Need to translate]
|
Conformity assessment - Guidelines on methods of intermediate checks for measuring equipment
| Valid |
GB/T 27431-2023
|
PDF similar to GB/T 27431-2023
Basic data | Standard ID | GB/T 27431-2023 (GB/T27431-2023) | | Description (Translated English) | Conformity assessment - Guidelines on methods of intermediate checks for measuring equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 03.120.20 | | Word Count Estimation | 26,217 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2023-09-07 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 27431-2023: Conformity assessment - Guidelines on methods of intermediate checks for measuring equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03.120.20
CCSA00
National Standards of People's Republic of China
Methodological guidance for period verification of measuring equipment during conformity assessment
Published on 2023-09-07
Implemented on 2023-09-07
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
Introduction II
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 General 2
5 Documents and records verified during the period 3
6 Periodic verification of equipment metrology characteristics 4
7 Periodic verification of equipment functionality and safety10
Appendix A (informative) Example of periodic verification of standard force measuring instrument 11
Appendix B (informative) Example of periodic verification of quality comparator 13
Appendix C (informative) Example of periodic verification of liquid chromatograph 16
Appendix D (informative) Martindale Abrasion Tester-Lissajous graph period verification example 19
Appendix E (informative) Example 20 of periodic verification of airtight doors in biosafety laboratories
Reference 22
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and coordinated by the National Certification and Accreditation Standardization Technical Committee (SAC/TC261).
This document was drafted by. China National Accreditation Center for Conformity Assessment, Guangdong Institute of Metrology, China Institute of Metrology, Xi'an
Institute of Metrology, Inner Mongolia Autonomous Region Institute of Metrology and Testing, China Electronics Technology Group Corporation 54th Research Institute, China Fiber
Quantity Monitoring Center, Shenzhen CTI Metrology Technology Co., Ltd., Henan Provincial Measurement Standards and Product Quality Inspection and Testing Center, Guangdong Academy of Sciences
Testing and Analysis Institute (Analysis and Testing Center in Guangzhou, China), Chinese Academy of Inspection and Quarantine, Jilin Institute of Metrology, Shenzhen
Institute of Metrology and Quality Inspection, Hubei Institute of Metrology and Testing Technology.
The main drafters of this document. Wang Yang, Lin Zhiguo, Anping, Wei Zuozhi, Xiu Hongyu, Hu Chang, An Xiaoning, Wang Guijuan, Zhou Shuo, Li Penghui, Shi Enjie,
Peng Jiwei, Qi Xiaohua, Fang Facheng, Li Mingzhao, Wang Qi.
Introduction
Periodic verification is to verify the measurement characteristics and functions of the measuring equipment according to prescribed procedures during use (including between two adjacent calibrations/verifications).
Operations performed to determine whether performance and/or safety continue to meet method requirements or specified requirements. Depending on the service life of the measuring equipment,
Life, reliability, stability, usage risks and verification costs are used to determine whether verification during implementation is required.
Periodic verification is an effective way to verify the performance status of measurement equipment through technical means. It is an important way for organizations to maintain confidence in equipment performance and
The quality control method often used to ensure the validity of measurement results is also an effective means for organizations to accurately manage measurement equipment.
GB/T 27025 "General Requirements for Testing and Calibration Laboratories Capabilities", GJB2725A "General Requirements for Testing and Calibration Laboratories"
Requirements", JJF1069 "Assessment Standards for Legal Metrology Verification Institutions" and "Quality Recognition Review Guidelines for Inspection and Testing Institutions" etc.
There are relevant provisions for verification. This document can help organizations better understand and correctly implement period verification activities for measuring equipment to ensure period
Verify the effectiveness and pertinence of activities and improve the organization's management level and capabilities of measurement equipment. This document can deepen reviewers’ testing
Understand the verification during the measurement of equipment, unify the review standards, and ensure review quality and review consistency.
Methodological guidance for period verification of measuring equipment during conformity assessment
1 Scope
This document provides methodological guidance for periodic verification of measuring equipment, including general principles, documents and records of periodic verification, and measurement specialties of measuring equipment.
Suggestions on safety, functionality and safety period verification.
This document applies to period verification activities of measuring equipment performed by the organization.
Note. Institutions include but are not limited to testing and calibration laboratories, legal metrology verification institutions, inspection institutions, reference material producers, proficiency testing providers, scientific research
Laboratory etc.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 27000 Conformity assessment vocabulary and general principles
JJF1001-2011 General measurement terms and definitions
3 Terms and definitions
The following terms and definitions as defined in GB/T 27000, JJF1001-2011 and ISO /IEC Guide 99.2007 apply to this document.
3.1
Measuring equipment measuring equipment
Measuring instruments, software, measurement standards, reference materials, auxiliary equipment or combinations thereof necessary to implement the measurement process.
[Source. JJF1001-2011,6.6]
3.2
interimcheckintermediatecheck
During the use of the equipment (including between two adjacent calibrations/verifications), its metrological characteristics, functionality and/or safety must be verified in accordance with prescribed procedures.
Whether the safety continues to meet the requirements of the method or the requirements of the regulations.
Note 1."Method requirements" are the relevant requirements for the measurement characteristics, functionality and/or safety of the equipment by testing/calibration and other methods.
Note 2."Prescriptive requirements" are determined by the institution itself based on use needs and risks, and are usually stricter than "method requirements".
3.3
checkstandard checkstandard
Equipment, samples, systems or devices used to verify the metrological properties, functionality and/or safety of measuring equipment.
3.4
Characteristics that can affect measurement results.
Note 1.Measuring equipment usually has several metrological characteristics.
Note 2.Metrological characteristics are generally the object of calibration.
|