|
US$489.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27413-2012: Quality control and quality estimation in petroleum products testing laboratory
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27413-2012 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Quality control and quality estimation in petroleum products testing laboratory
| Valid |
GB/T 27413-2012
|
PDF similar to GB/T 27413-2012
Basic data | Standard ID | GB/T 27413-2012 (GB/T27413-2012) | | Description (Translated English) | Quality control and quality estimation in petroleum products testing laboratory | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B04 | | Classification of International Standard | 19.020 | | Word Count Estimation | 21,239 | | Quoted Standard | GB/T 27407; GB/T 27411; GB/T 27412; JJF 1001 | | Regulation (derived from) | National Standards Bulletin 2012 No. 42 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the petroleum products testing laboratory to establish and maintain a quality management system elements. This standard applies to petroleum products testing laboratory quality control and quality assessment. | GB/T 27413-2012: Quality control and quality estimation in petroleum products testing laboratory---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS19.020
B04
National Standards of People's Republic of China
Petroleum product quality testing laboratories
Control and quality assessment
Issued on. 2012-12-31 2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points.
This standard was drafted. People's Republic of China Liaoning Province Exit Inspection and Quarantine, China National Accreditation Center, China Petroleum
Chemical Corporation, China Institute of Metrology, People's Republic of China Yantai Exit Inspection and Quarantine, the quality of technical supervision Dehong
Governor Comprehensive Test Center, Beijing University of Technology, Dalian West Pacific Petrochemical Co., Ltd., Yunnan Province Product Quality Supervision and Inspection Institute, large
Even Gas Group Co., Ltd., Mianyang City Product Quality Supervision, Inspection.
The main drafters of this standard. Wang Wen bucket, Sun Hairong, cattle Xingrong, Yang Ming, Yin Tonghua, Shichang Yan, Huang Xiaoyi, Jackson to the king, Yun Deng, Xie law,
Pan Zhiqiang, Zhang Xuezhong, Wang Jie, Da Hailing.
Petroleum product quality testing laboratories
Control and quality assessment
1 Scope
This standard specifies the key points of petroleum products testing laboratories to establish and maintain the quality management system.
This standard applies to quality control and quality assessment of petroleum products testing laboratory.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 27407 quality control laboratories use performance statistics for quality assurance and control chart technical evaluation and analysis of the measurement system
GB/T 27411 common testing laboratory Uncertainty Evaluation Method and representation
GB/T 27412-based verification of a single sample test results of laboratory detection bias
JJF1001 common measurement terms and definitions
3 Terms and Definitions
The following terms and definitions GB/T 27407 and JJF1001 defined apply to this document.
3.1
Reference substance referencematerial
Standard Substance
Having a sufficiently uniform and stable characteristics of a particular substance, its characteristics are confirmed for measuring or checking the expected nominal characteristic
use.
Note 1. The standard assignment or assignment of substances can be used for measurement precision control, only the standard substance assignment available for calibration or measurement trueness control.
Note 2. In a given measurement, a given reference material can only be used for calibration or quality assurance both in one application.
[JJF1001-2011, the definition 8.14]
3.2
CRMs certifiedreferencematerial, CRM
Accompanied by an authority published document, provide a valid program has acquired a degree of uncertainty and traceability or more characteristics
Standard material values.
[JJF1001-2011, the definition 8.15]
3.3
Quality control samples qualitycontrolsample
QC samples
Storing the complete amount sufficient stability and homogenized material, its physical or chemical properties similar to conventional sample measurement system.
Note. For the period of precision and stability under conditions of precision measurement system to identify and monitor.
[GB/T 27407-2010, the definition 3.7]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27413-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 27413-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27413-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27413-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|