|
US$374.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27020-2016: Conformity assessment -- Requirements for the operation of various types of bodies performing inspection
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27020-2016 | English | 374 |
Add to Cart
|
3 days [Need to translate]
|
Conformity assessment -- Requirements for the operation of various types of bodies performing inspection
| Valid |
GB/T 27020-2016
|
PDF similar to GB/T 27020-2016
Basic data | Standard ID | GB/T 27020-2016 (GB/T27020-2016) | | Description (Translated English) | Conformity assessment -- Requirements for the operation of various types of bodies performing inspection | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 03.120.20 | | Word Count Estimation | 19,183 | | Date of Issue | 2016-04-25 | | Date of Implementation | 2016-08-01 | | Older Standard (superseded by this standard) | GB/T 18346-2001 | | Regulation (derived from) | National Standard Announcement 2016 No.7 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 27020-2016: Conformity assessment -- Requirements for the operation of various types of bodies performing inspection
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Conformityassessment - Requirements for the operation of various types of bodies performing inspection
ICS 03.120.20
A00
National Standards of People's Republic of China
Replace GB/T 18346-1998
Qualified assessment of various types of inspection agencies
Operational requirements
(ISO /IEC 17020..2012, IDT)
2016-04-25 released
2016-08-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Directory
Preface I
Introduction II
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 General requirements 2
4.1 impartiality and independence
4.2 Confidentiality 3
Structural Requirements
5.1 Administrative requirements 3
5.2 Organization and management 3
6 Resource requirements 4
6.1 Personnel 4
6.2 Facilities and equipment 5
6.3 Subcontracting 5
Process Requirement 6
7.1 Test methods and procedures 6
7.2 Inspection items and sample disposal 7
7.3 Inspection records 7
7.4 Inspection report and inspection certificate 7
7.5 Complaints and Complaints 7
7.6 Complaint and appeal process 7
8 Management System Requirements 8
8.1 Mode 8
8.2 Management System Files (Mode A) 8
8.3 File Control (Mode A) 8
8.4 Record Control (Mode A) 9
8.5 Management Review (Mode A) 9
8.6 Internal Audit (Mode A) 9
8.7 Corrective Action (Mode A) 10
8.8 Precautions (Mode A) 10
Appendix A (normative appendix) Independence requirements of inspection bodies 11
Appendix B (informative) Optional elements in inspection reports and certificates 13
Reference 14
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 18346-1998 "Qualification assessment of various types of inspection agencies operating requirements".
This standard uses the translation method equivalent to ISO /IEC 17020..2012 "conformity assessment of various types of inspection agencies operating requirements", is qualified
Assessment of one of the series of standards.
This standard is proposed by the National Certification and Accreditation Standardization Technical Committee (SAC/TC261).
The drafting of this standard. China National Accreditation Center for Conformity Assessment, Shenzhen Special Equipment Inspection Science Research Institute, Shanghai Chemical Industry Research Institute,
Shenzhen Institute of Inspection and Quarantine, China Electrical Appliances Research Institute, China Special Equipment Inspection Science Research Institute, Fujian inspection and quarantine technology
center.
The main drafters of this standard. Liu Lidong, Li Hong, Cai Lumin, Xie Changhuan, Liu Gang, Chen Yongkang, Chen Weisheng, Guan Jian, Cheng Lijun.
Introduction
The purpose of this standard is to enhance the trust of the inspection agency.
The inspection agency conducts an assessment on behalf of a private client, its parent organization or an official body with the aim of providing the above-mentioned institution with a
Regulations, standards, specifications, inspection programs or contract compliance information. The inspection parameters include quantity, quality, safety, applicability, and in-flight devices
Or the continuous safety of the system. In order to make the service of the inspection agency be accepted by the customer and the regulatory body, the inspection agency shall comply with
General requirements for uniform cost standards.
This standard covers the activities of the inspection agency, including the use of materials, products, installations, factories, processes, working procedures or services
Review, determine their compliance with the requirements, and subsequently report the results of these activities to the client and, if necessary, report to the official body. Test can be
Covering all phases of the seized project, including the design phase. When engaging in inspection activities, especially when evaluating conformity to general requirements,
Often require professional judgment.
This standard may be used as a request document for accreditation, peer review or other review.
When applied to specific areas, the requirements of this standard can be explained.
When the activity is common, the test activity can be crossed with the detection and certification activities. However, the important difference between testing and testing and certification is true
Many types of inspection activities include the use of professional judgment to confirm compliance with the general requirements. So the inspection agency needs to have the implementation of inspection
The necessary capacity.
A test can be an activity that is included in a large process. For example, in a product certification program, the test can be used as a supervisory activity.
The inspection may be an activity prior to maintenance, or simply provide information on the item being tested without making a decision
set. In this case, further explanation may be required.
Classification of inspection bodies into categories A, B, or C is essentially a measure of the independence of the inspection agency. The inspection body can prove
The independence of the organization can enhance the ability of the organization to conduct a fair test of confidence. The following verbs are used in this standard.
--- "should" express the request;
--- "should" make recommendations;
--- "may" means yes;
--- "can" express the possibility or ability.
Qualified assessment of various types of inspection agencies
Operational requirements
1 Scope
This standard specifies the ability to inspect the organization and the fairness and consistency of its inspection activities.
This standard applies to the A, B, C inspection bodies as defined in this standard and is applicable to any stage of inspection.
Note. The stages of inspection include design phase, type test, initial inspection, operation inspection or supervision.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 27000-2006 Conformity Assessment Glossary and General Principles (ISO /IEC 17000..2004, IDT)
3 terms and definitions
GB/T 27000-2006 Definitions and the following terms and definitions apply to this document.
3.1
Inspection inspection
Review the product (3.2), process (3.3), service (3.4) or installation, or review its design and determine its compliance with the specific requirements
Sex, or on the basis of professional judgment to determine its compliance with the general requirements
Note 1. The inspection of the process may include personnel, facilities, techniques or methods.
Note 2. The inspection procedure or program may limit the inspection to a review only.
Note 3. References GB/T 27000-2006 Definitions 4.3.
Note 4. The term "item" as used in this standard may refer to the corresponding product, process, service or installation in different circumstances.
3.2
Product product
The results of the process
Note 1. GB/T 19000-2008 marked four general product categories.
--- services (eg transport) (see definition 3.4);
--- software (such as computer programs, dictionaries);
--- hardware (such as engine, mechanical parts);
--- Process materials (eg lubricants).
Many products are made up of components that belong to different product categories whose attributes are service, software, hardware, or process material, depending on the product
The leading component.
Note 2. The product includes the results of natural processes, such as the growth of plants and the formation of other natural resources.
Note 3. Refer to GB/T 19000-2008 for definitions 3.3.
3.3
Process process
A set of activities that transform inputs into outputs that are interrelated or interacting
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27020-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 27020-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27020-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27020-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|