|
US$1679.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26805.4-2011: Industrial control computer system -- Software -- Part 4: Engineering document specification
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26805.4-2011 | English | 1679 |
Add to Cart
|
10 days [Need to translate]
|
Industrial control computer system -- Software -- Part 4: Engineering document specification
| Valid |
GB/T 26805.4-2011
|
PDF similar to GB/T 26805.4-2011
Basic data | Standard ID | GB/T 26805.4-2011 (GB/T26805.4-2011) | | Description (Translated English) | Industrial control computer system -- Software -- Part 4: Engineering document specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N18 | | Classification of International Standard | 25.040.40 | | Word Count Estimation | 76,724 | | Date of Issue | 2011-07-29 | | Date of Implementation | 2011-12-01 | | Quoted Standard | GB/T 7714-2005; GB/T 8567-2006; GB/T 11457-2006; GB/T 26805.3-2011 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the industrial control software projects in various stages of its life cycle software documentation produced by the main content, format and preparation required for a software project development, accreditation, use and maintenance of the benchmarks. This standard applies to industrial control software and its revised version of the technical documentation preparation. | GB/T 26805.4-2011: Industrial control computer system -- Software -- Part 4: Engineering document specification
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial control computer system Software Part 4. Engineering document specification
ICS 25.040.40
N18
National Standards of People's Republic of China
Industrial Control System Software
Part 4. engineering document specification
Part 4. Engineeringdocumentspecification
Issued on. 2011-07-29
2011-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 document specification 1
Write format in Appendix A (normative) feasibility study report 37
Compose tips Appendix B (normative) Software Project Development Plan 40
Write Annex C (normative) software requirements specification Tip 42
Preparation of Annex D (normative) data requirements specification Tip 44
Appendix E (normative) software outline design specification Compose tips 46
Annex F (normative) software to prepare detailed design specification of 48 tips
Annex G (normative) preparation of design specification database 51 Tips
Write Annex H (normative) software module specification tips 53
Compose tips Annex I (normative) Software Quality Assurance Plan 55
Write Annex J (normative) Software Configuration Management Plan 58 tips
Compose tips Annex K (normative) User's Manual 61
Compose tips Annex L (normative) Operation Manual 63
Annex M (normative) program maintenance manual preparation tips 65
Write Annex N (normative) Test Plan 67 tips
Compose tips Appendix O (normative) Test Analysis Report 69
Write Annex P (normative) installation prompt implementation process 71
Table 1 quality record of each stage 22
Table 2 Quality Assurance Events Calendar 22
Table 3 configuration item naming rules Table 26
Table 4 lists the configuration items and configuration baseline 26
Table 5 Program configuration management activities schedule 27
Foreword
GB/T 26805 "Industrial Control System Software" is divided into the following sections.
--- Part 1. Evaluation System;
--- Part 2. Test methods;
--- Part 3. Document Management Guide;
--- Part 4. engineering document specification;
--- Part 5. user software documentation.
This part of GB /Part 4 T 26805 of.
This section of the Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix F, Appendix G, Appendix H, Appendix I, Appendix J, Appendix K, attached
Record L, Appendix M, Appendix N, O, and Appendices Appendix P are normative appendix.
This part is proposed by China Machinery Industry Federation.
This part of the measurement and control of Standardization Technical Committee (SAC/TC124) is administered by the National industrial processes.
This section is responsible for drafting. Shenzhen EVOC Software Technology Co., Ltd.
Participated in the drafting of this section. Beijing Advantech Industrial Electronics Technology Co., Ltd. Southwest University, China Institute of Industrial Control Computer Calculation
Machine Professional Committee.
The main drafters of this section. Simon Chen, Liu Zhiyong.
The drafters of some of the participants. Liu Xuedong, pool Liu, Yang Songhua, Liu Feng, Zhang group, Lu Jing, Yang Mengfei.
Industrial Control System Software
Part 4. engineering document specification
1 Scope
This section GB/T 26805 provisions of industrial control software projects, at various stages of their life cycle generated by major software text
File content, format, and preparation requirements for a software development project, evaluation, use and maintenance of reference.
This section applies to the preparation of industrial control software and revision of technical documentation in.
2 Normative references
The following documents contain provisions which, through reference GB/T 26805 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 7714-2005 after bibliographic reference to the rules (ISO 690. 1987, NEQ)
GB/T 8567-2006 computer software documentation
GB/T 11457-2006 Information technology - Software engineering terminology
GB/T 26805.3-2011 Industrial Control System Software - Part 3. Document Management Guide
3 Terms and Definitions
GB/T 11457-2006 and established the following terms and definitions apply to this part of the GB/T 26805 of.
3.1
System system
Unless otherwise stated, it refers to the software system.
3.2
Sensitive parts sensitiveposition
System or part of the performance is susceptible to certain elements or parts of the site.
3.3
Sensitivity sensitiveness
System or part of certain factors is susceptible to performance.
3.4
Sensitive conditions sensitivecondition
System or part of certain factors is susceptible to performance conditions.
3.5
Engineering documentation engineeringdocument
Industrial control software life cycle project generated documents.
4 document specification
4.1 Feasibility Study Report
4.1.1 General
The feasibility study report on the industry to make a summary description of the control object, according to the needs of the environment and implementation of software development projects in certain
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26805.4-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 26805.4-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26805.4-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26805.4-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|