| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26563-2011 | English | 120 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Fused zirconia
| Valid |
GB/T 26563-2011
|
PDF similar to GB/T 26563-2011
Basic data | Standard ID | GB/T 26563-2011 (GB/T26563-2011) | | Description (Translated English) | Fused zirconia | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q44 | | Classification of International Standard | 81.080 | | Word Count Estimation | 10,151 | | Date of Issue | 2011-06-16 | | Date of Implementation | 2012-02-01 | | Quoted Standard | GB/T 4984; GB/T 5071; GB 6566; GB/T 17617; GB/T 21114; YB/T 5142 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 9 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the fused zirconia terms and definitions, classifications and grades, technical requirements, test methods, inspection rules, packaging, marking, transportation, storage and quality certificates. This standard applies to refractories and ceramics and other industries with monoclinic and partially stabilized fused zirconia. | GB/T 26563-2011: Fused zirconia---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fused zirconia
ICS 81.080
Q44
National Standards of People's Republic of China
Fused zirconia
Issued on. 2011-06-16
2012-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard Annex A, Annex B normative appendix.
This standard by the National Standardization Technical Committee Refractories and centralized.
This standard was drafted. Zhengzhou Zhenzhong fused zirconium Co., Ltd., Fujian Sanxiang Advanced Materials Co., Ltd., Metallurgical Industry Information Standards
Institute.
The main drafters of this standard. Xu Baokui, Yuxin Meng, Ye Wang Dan, Choujin Hui, Gao Jianping.
Fused zirconia
1 Scope
This standard specifies the terms and definitions fused zirconia, classification and grade, technical requirements, test methods, inspection rules, packaging, labeling,
Transport, storage and quality certificate.
This standard applies to monoclinic and partially stabilized fused zirconia refractory materials and ceramic industries use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4984 Chemical analysis of zirconium-containing refractories
GB/T 5071 Refractory true density
GB 6566 building materials radionuclide limits
GB/T 17617 refractory raw materials and monolithic refractories sampling
GB/T 21114 refractory X-ray fluorescence spectroscopy for chemical analysis - cast glass method
YB/T 5142 metallurgical mineral packaging, labeling, transportation, storage and quality certificate
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Fused zirconia is zircon sand (formula. ZrSiO4) main raw material, carbon material as a reducing agent in an electric arc furnace in the reduction of zircon sand
Desilication by blowing or casting off after generating zirconium silicon, it is also referred to as silica zirconium or fused silica zirconium.
3.2
Stabilization rate rateofstabilizion
Fused zirconia into monoclinic polymorph according to phase (mZ), tetragonal (tZ), cubic phase (cZ), in which the tetragonal phase, the cubic phase is stable.
The stability of fused zirconia in order to stabilize the rate, said.
Stabilization rate (%) = [(cubic tetragonal phase)/(cubic tetragonal monoclinic)] × 100
4 Classification and designation
4.1 Classification
Fused zirconia into monoclinic and partially stabilized type two categories.
Zirconia partially stabilized by the stabilizer used is divided into type calcium (Ca yttrium complex) stabilized zirconia, magnesium (Mg composite yttrium) oxide stabilized
Zirconia, yttria-stabilized zirconia and the like.
Grade 4.2
Grades from English letters and numbers. Z is the English "zirconia" prefix, P is the English "partial" prefix, C, M, Y, respectively
|