HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 26414-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26414-2010: Gadolinium-magnesium alloy
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 26414-2010English229 Add to Cart 3 days [Need to translate] Gadolinium-magnesium alloy Valid GB/T 26414-2010

PDF similar to GB/T 26414-2010


Standard similar to GB/T 26414-2010

GB/T 20892   GB/T 20168   GB/T 20169   GB/T 26413   GB/T 26415   GB/T 26412   

Basic data

Standard ID GB/T 26414-2010 (GB/T26414-2010)
Description (Translated English) Gadolinium-magnesium alloy
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H65
Classification of International Standard 77.120.99
Word Count Estimation 10,119
Date of Issue 2011-01-14
Date of Implementation 2011-11-01
Quoted Standard GB/T 8170
Regulation (derived from) National Standard Approval Announcement 2011 No.159
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the requirements gadolinium magnesium alloy, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to electrolysis, melt with law and reduction of production, automobile engines and high temperature magnesium alloy additives such as gadolinium magnesium alloy for use as.

GB/T 26414-2010: Gadolinium-magnesium alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gadolinium-magnesium alloy ICS 77.120.99 H65 National Standards of People's Republic of China Gadolinium magnesium alloy Issued on. 2011-01-14 2011-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard by the National Standardization Technical Committee of rare earth (SAC/TC229) centralized. This standard by the Baotou Rare Earth Research Institute is responsible for drafting. This standard by the Hunan Institute of rare earth materials, Institute of Rare Earth New Materials Co., Ltd. participated in the drafting. The main drafters. Zhang Zhihong, in Ya-chiao, Chen Guohua, Xie Ping, Hou Fusheng, Weng Guoqing, Pang Siming. Gadolinium magnesium alloy

1 Scope

This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of gadolinium magnesium alloy. This standard applies to electrolysis, fused with the law and the reduction of production, made for magnesium automotive engine additives, such as magnesium alloy and high temperature with gadolinium alloy.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values and judgment

3 Requirements

3.1 Chemical composition Gadolinium magnesium alloy chemical composition shall comply with the requirements of Table 1. Demand side, such products have special requirements, both parties can agree otherwise. Table 1 product Trademark Chemical composition (mass fraction) /% RE Mg Gd/RE not less than Impurity content of not more than Rare earth impurities/RE Non-rare earth impurities Si Fe Al Ca Cu Ni CO 085085A 85 ± 2 margin 99.9 0.1 0.02 0.10 0.10 0.05 0.03 0.01 0.05 0.1 085085B 85 ± 2 margin 99.5 0.5 0.05 0.20 0.10 0.10 0.05 0.05 0.08 0.1 085075A 75 ± 2 Balance 99.9 0.1 0.02 0.10 0.10 0.05 0.03 0.01 0.05 0.1 085075B 75 ± 2 Balance 99.5 0.5 0.05 0.20 0.10 0.10 0.05 0.05 0.08 0.1 085030A 30 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05 085030B 30 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05 085025A 25 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05 085025B 25 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05 085020A 20 ± 2 margin 99.9 0.1 0.02 0.10 0.02 0.05 0.03 0.01 0.03 0.05 085020B 20 ± 2 balance 99.5 0.05 0.5 0.20 0.05 0.10 0.05 0.05 0.05 0.05 3.2 Appearance 3.2.1 Products for the cast alloy.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26414-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26414-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26414-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26414-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.