|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26256-2010: Interference, coexistence and corresponding measurement methods of 2.4 GHz wireless telecommunications equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26256-2010 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Interference, coexistence and corresponding measurement methods of 2.4 GHz wireless telecommunications equipment
| Valid |
GB/T 26256-2010
|
PDF similar to GB/T 26256-2010
Basic data | Standard ID | GB/T 26256-2010 (GB/T26256-2010) | | Description (Translated English) | Interference, coexistence and corresponding measurement methods of 2.4 GHz wireless telecommunications equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M36 | | Classification of International Standard | 33.060.01 | | Word Count Estimation | 9,949 | | Date of Issue | 2011-01-14 | | Date of Implementation | 2011-06-01 | | Quoted Standard | YD/T 1312.1; YD/T 1484; ETSI EN 300328 | | Regulation (derived from) | National Standard Approval Announcement 2011 No.22 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the work at 2. 4GHz (2. 4 ~ 2. 4835GHz) mutual interference restrictions band wireless communication devices and coexistence technical requirements, including radio frequency, multi-mode mutual interference and electromagnetic compatibility of three parts, and provides the corresponding test methods. This standard applies to all work in the 2. 4GHz band wireless communication devices. | GB/T 26256-2010: Interference, coexistence and corresponding measurement methods of 2.4 GHz wireless telecommunications equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Interference, coexistence and corresponding measurement methods of 2.4 GHz wireless telecommunications equipment
ICS 33.060.01
M36
National Standards of People's Republic of China
2.4GHz band radio communication device
Limit interference and coexistence requirements and test methods
Interference, coexistenceandcorresponding
Issued on. 2011-01-14
2011-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard reference ETSIEN300328 "Electromagnetic compatibility and Radio spectrum. Working in a wide frequency band using 2.4GHzISM
Data transmission equipment with modulation techniques "and other standards were developed.
This standard is also in the process of drafting a note with the following harmonized standard. YD/T 1312.1 "wireless communication device electromagnetic compatibility limits
And measuring methods - Part 1. General requirements "and YD/T 1484" mobile station radiated RF power and receiver performance measurements. "
The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
The standard by the China Communications Standards Association.
This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute, Nokia Telecommunications Limited.
The main drafters of this standard. Guo Lin, Xiao Gimli, He Xiaoyan, Yang Meng, Zhou Qi north.
2.4GHz band radio communication device
Limit interference and coexistence requirements and test methods
1 Scope
This standard specifies the work to limit interference (2.4GHz ~ 2.4835GHz) bands in the 2.4GHz wireless communication device
And coexistence technical requirements, including radio frequency, multimode mutual interference and electromagnetic compatibility of three parts, and provides the corresponding test methods.
This standard applies to all staff within the 2.4GHz band wireless communication device.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
YD/T 1312.1 wireless communication device electromagnetic compatibility requirements and measuring methods - Part 1. General requirements
YD/T 1484 mobile space radiated RF power and receiver performance measurement
ETSIEN300328 Electromagnetic compatibility and Radio spectrum. Operating data 2.4GHzISM band broadband modulation techniques
Transmission equipment
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this standard.
3.1.1
Equivalent isotropic radiated power equivalentisotropicradiatedpower
EUT radiation power value in a certain direction, and this is the result of the full power value obtained as compared to the antenna (0dB gain).
3.1.2
Equivalent isotropic sensitivity equivalentisotropicsensitivity
The minimum forward link power in one direction EUT receiver sensitivity value to EUT can receive the base station transmitted in this direction
Rate to indicate that this is the result of the full power value obtained as compared to the antenna (0dB gain).
3.1.3
The total isotropic sensitivity totalisotropicsensitivity
EUT in EIS integration value of the three-dimensional space sphere, reflecting the EUT reception characteristics in all directions.
3.1.4
Integrated antenna device integralantennaequipment
No external antenna connectors such equipment, is part of the equipment. Integrated antenna may be internal or external.
3.1.5
Port port
Specify a specific interface device with an external electromagnetic environment.
3.2 Acronyms
The following abbreviations apply to this standard.
AP AccessPoint AP
ACK Acknowledgement confirmation
|