| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26229-2010 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Information technology -- Telecommunications and information exchange between systems -- Wireless high rate ultra-wideband MAC and PHY specification
| Valid |
GB/T 26229-2010
|
PDF similar to GB/T 26229-2010
Basic data | Standard ID | GB/T 26229-2010 (GB/T26229-2010) | | Description (Translated English) | Information technology -- Telecommunications and information exchange between systems -- Wireless high rate ultra-wideband MAC and PHY specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L79 | | Classification of International Standard | 35.100 | | Word Count Estimation | 281,239 | | Date of Issue | 2011-01-14 | | Date of Implementation | 2011-05-01 | | Quoted Standard | GB/T 26230-2010; IEEE 802.1D | | Adopted Standard | ISO/IEC 26907-2007.MOD | | Regulation (derived from) | National Standard Approval Announcement 2011 No.2 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies a wireless network of distributed media access control sub-layer and physical layer. This standard applies to fixed, portable, mobile devices, which work mainly limited personal space (about 10m), provides transfer rates of up to 480Mbps. | GB/T 26229-2010: Information technology -- Telecommunications and information exchange between systems -- Wireless high rate ultra-wideband MAC and PHY specification
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology. Telecommunications and information exchange between systems. Wireless high rate ultra wideband MAC and PHY specification
ICS 35.100
L79
National Standards of People's Republic of China
Information technology - Telecommunications and information exchange
Wireless high speed ultra-wideband MAC and physical
Layer Specification
(ISO /IEC 26907.2007, Informationtechnology-Telecommunicationsand
andMACStandard, MOD)
Issued on. 2011-01-14 2011-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅴ
1 Scope 1
Consistency 1 2
3 Normative references 1
4 Terms and definitions
5 Conventions 4
4 Abbreviations 6
7 General description 7
General description 7 7.1 PHY
General description 7 7.2 MAC
8 PHY layer is divided into 12
8.1 PHY function 12
8.2 PLCP sublayer 12
8.3 PMD sublayer 12
8.4 PHY layer management entity (PLME) 12
Description 9 signal 12
9.1 Mathematical Expression 12
9.2 Tone-Nuling 13
10 PLCP sublayer 14
10.1 PPDU 14
10.2 PLCP preamble 16
10.3 PLCP header 27
10.4 PSDU 31
10.5 Data scrambler 32
10.6 parts of 33
10.7 convolutional encoder 33
10.8 interleaving 35
10.9 precoding (optional) 36
10.10 36 constellation map
10.11 associated coding (optional) 38
10.12 OFDM modulation 38
General requirements 11 45
11.1 Working frequency 45
11.2 pipeline 45
11.3 Physical (PHY) layer 47 time parameters
12 Transmitter Specification 48
48 12.1 send PSD template
12.2 transmit center frequency tolerance 49
12.3 symbol clock frequency tolerance 49
12.4 Clock Synchronization 49
49 12.5 phase coherent
12.6 transmit power control 49
12.7 transmitter constellation error 49
Receiver Specification 13 50
13.1 sensitivity receiver 50
13.2 The receiver CCA performance 50
13.3 Link Quality Indicator 50
14 ranging and location-aware 51
Ranging claim 51 14.1
14.2 ranging reference signal 51
14.3 PHY ranging resources 51
14.4 PHY ranging operations 52
14.5 calibration constants ranging 52
14.6 Distance Measurement example (informative) 52
15 PHY and MAC service access point (informative) 52
15.1 General MIB management primitives 53
15.2 PHYSAP interface 55
15.3 PLMESAP interface 61
15.4 MAC sub-layer management primitives 64
15.5 MAC Management Information Base (MIB) 64
15.6 MLMESAP interface 64
15.7 MACSAP interface 108
16 MAC frame format 110
16.1 Formatting convention 110
16.2 Generic MAC frame format 110
16.3 beacon frame 114
16.4 Control Frame 115
16.5 Command frame 117
16.6 frames 123
16.7 Aggregation of data frame 123
16.8 Information Element (IE) 123
17 MAC sublayer 138 Features
17.1 Processing 139
17.2 beacon period (BP) 146
17.3 priority contention access (PCA) 153
17.4 Distributed Reservation Protocol (DRP) 159
17.5 Device Synchronization 166
17.6 segmentation and reassembly 169
17.7 Merge 169
169 17.8 acknowledgment policy
171 17.9 Probe
17.10 dynamic channel selection 172
Support rate over 17.11 172
17.12 transmit power control 172
17.13 power management mechanism 172
Operation 175 17.14 ASIE
17.15 Operating distance measurement 175
17.16 MAC sublayer parameters 176
18 Security 178
178 18.1 Security Mechanism
179 18.2 Safety Information
18.3 temporary key 181
18.4 receiving step 185 and replay protection mechanisms
18.5 SMS4-128CCM input 186
Appendix A (normative appendix) MUX sublayer 189
Appendix B (Normative Appendix) MAC Layer strategy 191
Annex C (normative) assigned number 197 documents
Appendix D (Informative Appendix) MAC test vectors 199
Appendix E (Informative Appendix) PHY packet coding examples 208
Annex F (normative) ultra-wideband (UWB) technology using a predetermined frequency 254
Annex G (informative) distance measurement calculation 255
Appendix H (informative) initial step of selecting a logical channel 259
Annex I (informative) This standard and ISO /IEC 26907.2007 technical differences and the reasons 262
Foreword
This revised standard adopts ISO /IEC 26907.2007 Flat "Information technology - Telecommunications and information exchange between wireless high rate Wide
With MAC and Physical Layer Specifications. "
The Standard and ISO /IEC 26907.2007 technical differences exist compared to the terms of these differences has been involved through its outer margin empty
Singlet white vertical position (|) was marked Appendix I gives the list of the corresponding technical differences and their causes.
This standard is based on GB/T 1.1-2000 and GB/T 20000.2-2001 be written.
The Standard Appendix A, Appendix B, Appendix C, Appendix F normative appendix; Appendix D, Appendix E, Appendix G, Appendix H, Annex I to
Informative appendix.
This standard by the National Information Technology Standardization Technical Committee and centralized.
This standard drafting units. China Electronics Standardization Institute, HiSilicon Ltd., Southeast University, Beijing Post
Radio & TV University, IWNCOMM Wireless Network Communication Co., Fudan University, Hong Kong Applied Science and Technology Institute.
Main drafters. Pei, Xu Pingping, Zhuolan, Nan Guo, Peng Xiaoming, Zouwei Xia, Zhang Xiangdong, Huang Zhenhai, Fan Ye, Biguang Guo, Wang Yinfang,
Hu Yanan, Liu Liang, Dingquan Long, Zhou Zheng, Annan De, Chen Baoshan, Lin Zhiwei, square progenitor round, full of iron Xia, Xiao Yue Lei.
Information technology - Telecommunications and information exchange
Wireless high speed ultra-wideband MAC and physical
Layer Specification
1 Scope
This standard specifies a wireless network distributed MAC (MAC) sublayer and a physical layer (PHY).
This standard applies to fixed, portable and mobile devices, which mainly operate in the limited personal space (10m or so), to mention
For transfer rate up to 480Mbit/s of.
2 Conformance
Equipment to achieve consistency in this standard MAC sublayer and the PHY layer and supports the following.
Data rate a) for transmitting and receiving is. 53.2Mbit/s, 106.4Mbit/s and 200Mbit/s;
b) the spectral range of all 10 sub-bands defined in the standard;
c) When using the Dual Carrier frequency interleaving (DC-TFI) and dual-carrier fixed frequency interleaving (DC-FFI) were time - frequency coding.
In addition, the device can also be implemented in consistency MAC/PHY interface to GB/T 26230-2010 prescribed.
3 Normative References
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 26230-2010 Information technology - Telecommunications and information exchange between wireless high speed ultra-wideband MAC
And physical layer interface specification (ISO /IEC 26908.2007, MOD)
IEEE802.1D Media Access Control (MAC) bridge
4 Terms and Definitions
The following terms and definitions apply to this standard.
4.1
AC
Priority contention access (PCA) of the set of parameters a common reference numerals, devices using these parameters to transmit media to compete with a certain priority
Class MAC protocol data unit (MPDU).
4.2
BG
A collection of devices, a device receives a beacon and identify the devices with the same beacon period start time from the device collection.
4.3
BP
The apparatus claimed beacon transmission time period or listening.
|