HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 26142.2-2010 English PDF

US$234.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26142.2-2010: Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 26142.2-2010English234 Add to Cart 3 days [Need to translate] Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector Valid GB/T 26142.2-2010

PDF similar to GB/T 26142.2-2010


Standard similar to GB/T 26142.2-2010

GB/T 20080   GB/T 25133   GB/T 20079   GB/T 22107   GB/T 38178.1   GB/T 38205.1   

Basic data

Standard ID GB/T 26142.2-2010 (GB/T26142.2-2010)
Description (Translated English) Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Classification of International Standard 23.100.50
Word Count Estimation 12,181
Date of Issue 1/14/2011
Date of Implementation 10/1/2011
Quoted Standard ISO 1101; ISO 1302; ISO 4287; ISO 4288; ISO 5598; ISO 11727
Adopted Standard ISO 15407-2-2003, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 2 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies specifications for the 18 mm and 126 mm, the maximum rated working pressure of 1. 6MPa with an optional five-pneumatic control the direction of the electrical connector mounting surface with the following requirements and electrical connector valves: mounting surface dimensions and geometric tolerances; primary gas inlet port and the control identification; control means controls the result of identification; selectable electrical connector dimensions, tolerances and specifications. This standard does not apply to functional characteristics of the mounting surface.

GB/T 26142.2-2010: Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power Five-port directional control valves, size 18 mm and 26 mm Part 2. Mounting interface surfaces with optional electrical connector ICS 23.100.50 J20 National Standards of People's Republic of China Five-way pneumatic directional control valve Specifications 18mm and 26mm Part 2. with optional electrical connector mounting surface Pneumaticfluidpower-Five-portdirectionalcontrolvalves, sizes18mmand 26mm-Part 2. Mountinginterfacesurfaceswithoptionalelectricalconnector (ISO 15407-2.2003, IDT) Issued on. 2011-01-14 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 26142 "five-way pneumatic directional control valve size 18mm and 26mm" is divided into two parts. --- Part 1. Mounting interface surfaces without electrical connector; --- Part 2. mounting surface with optional electrical connector. This is Part 2 GB/T 26142 of. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 15407-2.2003 "Pneumatic Transmission Five - port directional control valves and specifications 18mm 26mm Part 2. mounting surface with optional electrical connector. " Consistency correspondence between this part of international documents and normative references of our files are as follows. Indicates --- GB/T 131-2006 Geometrical product specifications (GPS) technology products in the surface structure of the file Method (ISO 1302.2002, IDT); --- GB/T 1182-2008 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerance standard Note (ISO 1101.2004, IDT); --- GB/T 3505-2009 Geometrical product specifications (GPS) Surface texture Profile method - Terms, definitions and surface texture Parameters (ISO 4287.1997, IDT); Regular outline law assessment of surface texture (GPS) Surface texture --- GB/T 10610-2009 Geometrical product specifications And method (ISO 4288.1996, IDT); --- GB/T 17446-1998 fluid power systems and components term (idt ISO 5598. 1985). This part made the following editorial changes. --- In the "References" in a manner consistent with the corresponding international standards replace national standards with international standards; --- Drawing standards according to China's national standards. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized. This section is responsible for drafting units. Industrial Automation Equipment Co., Ltd. Ningbo Sono. Participated in the drafting of this section. Guangdong Zhaoqing pneumatic Fangda Co., Ltd. Ningbo Industrial Automation AirTAC. The main drafters of this part. silver unit, Qi-Fu, Chen Dingzhi LAM, Shen Weiping, Liu East Point.

Introduction

In the pneumatic system, power transmission and control in the pressure of the gas loop conducted. Various devices for gas distribution and control can be installed directly in the pipeline or mounting surface, the mounting surface can be achieved faster Speed \u200b\u200bdetachable and interchangeable purposes. Pneumatic control valve installed in the direction of the mounting surface of the five-way action for the control of the flow of compressed gas. When the valve is electrically driven, it is necessary to electrical connector mounted on the valve. If you are using a standard electrical connector, user-friendly valve will be different Manufacturers connector to be interchangeable. In order to improve the installation of pneumatic directional control valve interchangeability, provides the mounting surface of the main gas inlet port and control identification, valve work State, dimensions and tolerances on the mounting surface requirements. Five-way pneumatic directional control valve Specifications 18mm and 26mm Part 2. with optional electrical connector mounting surface

1 Scope

This section GB/T 26142 specifies the size of 18mm and 26mm, with a maximum rated pressure of 1.6MPa optional electric Five-pneumatic gas fitting direction control valve mounting surface and the electrical connector of the following requirements. --- Mounting surface dimensions and geometric tolerances; --- The main gas inlet port and the control identification; --- Control means controls the results identified; --- Optional electrical connector dimensions, tolerances and specifications. This section does not apply to the functional characteristics of the mounting surface. Note. For standard 18mm and 26mm pneumatic five-way direction without electrical connector mounting surface of the control valve of the requirements specified in GB/T 26142.1 in.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 1101 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerancing (Geometrical ProductSpecifications (GPS) -Geometricaltolerancing-Tolerancesofform, orientation, locationand run-out) ISO 1302 Geometrical product specifications (GPS) technology products in the surface structure of the file notation (GeometricalProduct Specifications (GPS) -Indicationofsurfacetextureintechnicalproductdocumentation) ISO 4287 Geometrical product specifications (GPS) Surface texture Profile method - Terms, definitions and surface texture parameters (GeometricalProductSpecifications (GPS) -Surfacetexture. Profilemethod-Terms, definitionsand surfacetextureparameters) ISO 4288 Geometrical product specifications (GPS) Surface texture Profile method - Terms, the assessment of surface structure of rules and methods (GeometricalProductSpecifications (GPS) -Surfacetexture. Profilemethod-Rulesandprocedures fortheassessmentofsurfacetexture) ISO 5598 Fluid power systems and components - Vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 11727 Pneumatic control valves and other components of the air intake, control identification mechanism (Pneumaticfluidpower- Identificationofportsandcontrolmechanismsofcontrolvalvesandothercomponents)

3 Terms and Definitions

As defined in ISO 5598 and the following terms and definitions apply to this document. 3.1 Electrical connector electricalconnector Electrical connector consists of two parts (plug and base), when they are combined, can play a role in the electrical and mechanical connection.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26142.2-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26142.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26142.2-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26142.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.