|
US$479.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25684.13-2021: Earth-moving machinery - Safety - Part 13: Requirements for rollers
Status: Valid GB/T 25684.13: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25684.13-2021 | English | 479 |
Add to Cart
|
5 days [Need to translate]
|
Earth-moving machinery - Safety - Part 13: Requirements for rollers
| Valid |
GB/T 25684.13-2021
|
| GB 25684.13-2010 | English | 959 |
Add to Cart
|
5 days [Need to translate]
|
Earth-moving machinery -- Safety -- Part 13: Requirements for rollers
| Obsolete |
GB 25684.13-2010
|
PDF similar to GB/T 25684.13-2021
Basic data | Standard ID | GB/T 25684.13-2021 (GB/T25684.13-2021) | | Description (Translated English) | Earth-moving machinery - Safety - Part 13: Requirements for rollers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Word Count Estimation | 25,214 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 25684.13-2021: Earth-moving machinery - Safety - Part 13: Requirements for rollers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery -- Safety -- Part 13: Requirements for rollers
ICS 53:100
CCSP97
National Standards of People's Republic of China
Replacing GB 25684:13-2010
Earthmoving Machinery Safety
Part 13: Requirements for road rollers
(ISO 20474-13:2017, MOD)
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Safety requirements and protective measures 3
4:1 General requirements 3
4:2 Non-ride-on machines3
4:3 Driver operating position (ride-on machine) 5
4:4 Driver's seat5
4:5 Controls and Indicators 5
4:6 Access device to driver's operating position and service point 6
4:7 Noise 6
4:8 Vibration 6
5 Usage Information 6
5:1 Safety labels6
5:2 Driver's Manual 6
5:3 Machine identification 6
Appendix A (normative) Noise test procedures for non-riding and remote-controlled vibratory rollers with a working width not greater than 1m 7
Appendix B (normative) Hand-arm vibration test procedure for non-riding vibratory rollers with working width not greater than 1m 15
Reference 19
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document is Part 13 of GB/T 25684 "Earth-moving Machinery Safety": GB/T 25684 has released the following parts:
--- Part 1: General requirements;
--- Part 2: Requirements for bulldozers;
--- Part 3: Requirements for loaders;
--- Part 4: Requirements for backhoe loaders;
--- Part 5: Requirements for hydraulic excavators;
--- Part 6: Requirements for dump trucks;
--- Part 7: Requirements for scrapers;
--- Part 8: Requirements for motor graders;
--- Part 9: Requirements for pipelayers;
--- Part 10: Requirements for trenchers;
--- Part 11: Requirements for backfill compactors;
--- Part 12: Requirements for mechanical excavators;
--- Part 13: Requirements for road rollers:
This document replaces GB 25684:13-2010 "Earth-moving Machinery Safety Part 13: Requirements for Road Rollers": This document is related to
Compared with GB 25684:13-2010, in addition to structural adjustment and editorial changes, the main technical changes are as follows:
a) Changed the scope of the standard (see Chapter 1, Chapter 1 of the:2010 edition);
b) The remote control type machine is deleted (see 4:5:4 of the:2010 edition);
c) Changed the braking system requirements and reference standards for ride-on machines (see 4:5:4:1, 4:5:5:1 of the:2010 edition);
d) Deleted the requirement for the lowest level of pedals (see 4:6:2 of the:2010 edition);
e) The requirement for rollover protection structure (ROPS) is deleted (see 4:7 of the:2010 edition);
f) The requirement for noise reduction of noise sources at the design stage is deleted (see 4:8:2 of the:2010 edition);
g) The requirements for the verification of safety requirements and/or protective measures have been deleted (see Chapter 5 of the:2010 edition):
This document is revised and adopted ISO 20474-13:2017 "Earth-moving machinery safety - Part 13: Requirements for road rollers":
The technical differences between this document and ISO 20474-13:2017 and their reasons are as follows:
--- 4:5:4:1 deleted "For the braking system of single-wheel rollers and combined rollers, all wheels and drums shall be braked:
"Moving", this requirement does not meet the technical development level of road rollers;
--- Change the international document ISO 3450 quoted in 4:5:4:1 to GB/T 21152, which is more applicable to the actual situation in my country;
--- Change the international document ISO 11201 referenced in A:4:1 and A:4:4 to GB/T 17248:2-2018 for the convenience of standard users
Use the corresponding Chinese file:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334):
The main drafting units of this document: XCMG Construction Machinery Co:, Ltd: Road Machinery Branch, Guangxi Liugong Machinery Co:, Ltd:
Company, Sany Automobile Manufacturing Co:, Ltd:, Tianjin Construction Machinery Research Institute Co:, Ltd:
The main drafters of this document: Gao Liang, Guo Qihua, Liu Qiubao, Chen Shuqiao, Liu Yanze, Chen Yunyu:
The previous versions of this document and its superseded documents are as follows:
---First published in:2010 as GB 25684:13-2010;
---This is the first revision:
Introduction
This document is a Type C standard defined by ISO 12100:
The scope of this document describes the machinery involved and the scope of the hazards, hazardous states or hazardous events involved:
Since the design and manufacture of the machine follow the requirements of Class C standards, when the requirements of Class C standards are different from those of Class A or Class B standards
At the same time, the requirements of Class C standards take precedence over other standards:
GB/T 25684 "Earth-moving Machinery Safety" is a basic and universal guideline for guiding my country's earth-moving machinery products to meet relevant safety requirements:
standard: GB/T 25684 aims to establish general safety requirements applicable to earth-moving machinery products and special safety requirements for specific machine families
requirements, it is proposed to be composed of 14 parts:
--- Part 1: General requirements: The purpose is to establish general safety requirements applicable to all machine types in the earthmoving machinery industry:
The foundational standard for a full range of standards:
--- Part 2: Requirements for bulldozers: The purpose is to propose specific products that meet the unique characteristics of bulldozer products:
Security Requirements Clause:
--- Part 3: Requirements for loaders: The purpose is to propose specific products that meet the characteristics of their own products according to the unique characteristics of loader products:
Security Requirements Clause:
--- Part 4: Requirements for backhoe loaders: The purpose is to propose a product that meets the unique characteristics of backhoe loader products:
Point-specific security requirements clause:
--- Part 5: Requirements for hydraulic excavators: The purpose is to put forward the unique characteristics of hydraulic excavator products that meet the characteristics of their own products:
Point-specific security requirements clause:
--- Part 6: Requirements for dump trucks: The purpose is to propose specific products that meet the unique characteristics of dump truck products:
Security Requirements Clause:
--- Part 7: Requirements for scrapers: The purpose is to propose specific products that meet the characteristics of their own products according to the unique characteristics of scraper products:
Security Requirements Clause:
--- Part 8: Motor grader requirements: The purpose is to propose specific products that meet the unique characteristics of motor graders:
Security Requirements Clause:
--- Part 9: Requirements for pipelayers: The purpose is to propose specific products that meet the unique characteristics of the pipelayer products:
Security Requirements Clause:
--- Part 10: Requirements for trenchers: The purpose is to propose special features that conform to the characteristics of the trencher products according to the unique characteristics of the trencher products:
Security requirements clauses:
--- Part 11: Requirements for backfill compactors: The purpose is to propose products that meet the unique characteristics of backfill compactor products:
Features specific security requirements clause:
--- Part 12: Requirements for mechanical excavators: The purpose is to propose products that meet the unique characteristics of mechanical excavators:
Features specific security requirements clause:
--- Part 13: Requirements for road rollers: The purpose is to propose special characteristics that meet the characteristics of the rollers according to the unique characteristics of the road roller products:
Security requirements clauses:
--- Part 14: Requirements for small implement carriers: The purpose is to put forward a proposal to meet the unique characteristics of small implement carrying machine products:
Specific safety requirements clauses for their own product features:
The safety requirements of Part 2 to Part 14 are used in conjunction with the general requirements of Part 1 to better meet the use requirements:
Earthmoving Machinery Safety
Part 13: Requirements for road rollers
1 Scope
This document specifies the safety requirements for road rollers as defined by ISO 6165; specifies the use of earth-moving machinery in
All major hazards, hazardous states and hazardous events related to it when applied under conditions of misoperation (see GB/T 25684:1-2021
Appendix A); and specifies techniques for eliminating or reducing the risks arising from significant hazards, hazardous states or hazardous events in use, operation and maintenance
measure:
This document is used in conjunction with GB/T 25684:1 (specifying general safety requirements for two or more families of earth-moving machinery): of this document
Specific requirements take precedence over the general requirements of GB/T 25684:1:
This document does not apply to machines manufactured prior to the implementation of this document:
2 Normative references
The contents of the following documents constitute indispensable provisions of this document through normative references in the text, among which the dated references are:
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 3767-2016 Acoustic sound pressure method for the determination of noise source sound power level and sound energy level of approximate free field above the reflecting surface
Cheng method (ISO 3744:2010, IDT)
GB/T 17248:2-2018 Noise emitted by acoustic machines and equipment is close to a reflective surface with negligible environmental correction
Determination of emission sound pressure levels at working positions and other specified positions in a pseudo-free field (ISO 11201:2010, IDT)
GB/T 21152 Performance requirements and test methods for wheeled or high-speed rubber crawler braking systems for earth-moving machinery
(GB/T 21152-2018, ISO 3450:2011, MOD)
GB/T 25684:1-2021 Earthmoving Machinery Safety Part 1: General Requirements (ISO 20474-1:2017, IDT)
ISO 3744 Acoustic sound pressure method—Engineering method for the determination of sound power levels and sound energy levels from noise sources in approximate free fields above reflecting surfaces
(Acoustics-Determinationofsoundpowerlevelsandsoundenergylevelsofnoisesourcesusing
soundpressure-Engineeringmethodsforanessentialyfreefieldoverareflectingplane)
Note: GB/T 3767-2016 Acoustic sound pressure method to measure noise source sound power level and sound energy level engineering method of approximate free field above the reflecting surface
(ISO 3744:2010, IDT)
ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes-
Identificationandtermsanddefinitions)
Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT)
ISO 6682 Earth-moving machinery operating comfort zone and reach (Earth-movingmachinery-Zonesofcomfort
andreachforcontrols)
Note: GB/T 21935-2008 Comfort zone and reach of earth-moving machinery manipulation (ISO 6682:1986/Amd:1:1989, IDT)
ISO 8811 Terminology and commercial specifications for earth-moving machinery and backfill compactors (Earth-movingmachinery-
Rolersandcompactors-Terminologyandcommercialspecifications)
Note: GB/T 7920:5-2017 Terminology and commercial specifications for earth-moving mechanical road rollers and backfill compactors (ISO 8811:2000, MOD)
ISO 11201 Approximate free-field measurement of noise emitted by acoustic machines and equipment over a reflective surface with negligible ambient correction
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25684.13-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 25684.13-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25684.13-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25684.13-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 25684.13-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25684.13-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|