|
US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25195.1-2010: Cranes -- Graphic symbols -- Part 1: General
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25195.1-2010 | English | 314 |
Add to Cart
|
3 days [Need to translate]
|
Cranes -- Graphic symbols -- Part 1: General
| Valid |
GB/T 25195.1-2010
|
PDF similar to GB/T 25195.1-2010
Basic data | Standard ID | GB/T 25195.1-2010 (GB/T25195.1-2010) | | Description (Translated English) | Cranes -- Graphic symbols -- Part 1: General | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 16,154 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-02-01 | | Adopted Standard | ISO 7296-1-1991, IDT | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the generic graphical symbols for crane control (Chapter 3) and the control buttons and lights colors (Chapter 4). Graphic symbols are listed in the following sub- groups, given by the 3. 1. 3. 2 and 3. 3: 3. 1 for graphics and switching the direction of movement of the position of the basic symbols, 3. 2 drivers for graphic symbols control, 3. 3 information graphical symbols. | GB/T 25195.1-2010: Cranes -- Graphic symbols -- Part 1: General---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Cranes Graphic symbols Part 1. General
ICS 53.020.20
J80
National Standards of People's Republic of China
Crane graphic symbols
Part 1. General
Part 1. General
(ISO 7296-1.1991, IDT)
Issued on. 2010-09-26
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 General requirements 1
3 1 graphic symbols for control
4 control buttons and signal lights 7
Reference 9
Chinese index 10
English 11 Index
Foreword
GB/T 25195 "Cranes graphic symbol" is divided into five sections.
--- Part 1. General;
--- Part 2. Mobile cranes;
--- Part 3. Tower cranes;
--- Part 4. jib cranes;
--- Part 5. Bridge and gantry cranes.
This section GB/T 25195 Part 1.
This part identical with ISO 7296-1.1991 "Cranes graphical symbols - Part 1. General" (in English), including its amendments
ISO 7296-1.1991/Amd.1.1996.
This section is equivalent translation ISO 7296-1.1991.
For ease of use, this section made the following editorial changes.
--- The term "this part of ISO 7296" with the words "GB/T 25195 in this section";
--- Remove the ISO 7296-1.1991 Foreword;
--- The ISO 7296-1.1991 in the 1.1 and 1.2 respectively rewritten Chapters 1 and 2 of this Part, the following sections to do with numbers
Corresponding extended;
--- In Chapters 3 and 4 in the supplementary table numbers in Tables 1 to 5;
--- The amendments have been incorporated into the body and they are involved in terms of the margin by a vertical double identity;
--- Increased Chinese index.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is drafted. Beijing Materials Handling Research Institute.
The main drafters of this section. Liu Tao.
Crane graphic symbols
Part 1. General
1 Scope
This section GB/T 25195 specifies the general graphical symbols for crane control (Chapter 3) and the control buttons and signal lights
Color (Chapter 4).
Graphic symbols are listed in the following sub-group, given by 3.1, 3.2 and 3.3.
--- 3.1 for graphics and motion direction of the basic position of the switch symbols;
--- 3.2 graphical symbols for control of the driver;
--- 3.3 information graphical symbols.
Note. For GB/T 25195 in this part of the graphical symbols in line with. ISO 3461-1. 1988 "General Principles set of graphical symbols - Part 1. In the set
Preparation of graphic symbols on ", ISO 4196. 1984" Graphical symbols arrow usage ", ISO 7000. 1989" used on the device icon and symbol index
Table "and IEC 417. 1973" for the graphics device symbol. " Edit the index, reviews, and a single page, as its complementary part.
2 General requirements
2.1 graphical symbol see 3.1 to 3.3.
2.2 Symbols on the controller should be a sharp contrast with the background (preferably bright control symbols control dark background).
2.3 symbols should be located next to or near the described function controller.
2.4 When you need more than one symbol (for example. "on", "off", "left", "right"), relative to the mounting position of the symbol should be consistent with the device
Direction of movement, and can play a role in tips.
2.5 All symbols should be located in the driver's position at the work place for easy identification.
2.6 Symbols indicating the direction of movement of the joystick can be specified using the joystick operation and the other symbol combinations.
Symbols can also press operations shown on the control panel at any position desired.
3 graphical symbols for control
3.1 for graphic basic direction of movement and position of the switch symbols are shown in Table 1.
Table 1
No. Symbol Description
417-IEC -5022
Unidirectional movement
movementinonedirection
ISO 7000-1680
A two-way movement of the joystick
controllever, workingmovementintwodirections
ISO 7000-0004
Clockwise rotation
rotation, clockwise
|