|
US$759.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25117.2-2010: Railway applications -- Rolling stock -- Combined testing -- Part 2: Combined testing of chopper-fed direct current traction motors and their control system
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25117.2-2010 | English | 759 |
Add to Cart
|
4 days [Need to translate]
|
Railway applications -- Rolling stock -- Combined testing -- Part 2: Combined testing of chopper-fed direct current traction motors and their control system
| Obsolete |
GB/T 25117.2-2010
|
PDF similar to GB/T 25117.2-2010
Basic data | Standard ID | GB/T 25117.2-2010 (GB/T25117.2-2010) | | Description (Translated English) | Railway applications -- Rolling stock -- Combined testing -- Part 2: Combined testing of chopper-fed direct current traction motors and their control system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | S35 | | Classification of International Standard | 29.280 | | Word Count Estimation | 19,144 | | Date of Issue | 2010-09-02 | | Date of Implementation | 2011-02-01 | | Quoted Standard | GB/T 2900.25-2008; GB/T 2900.33-2004; GB/T 2900.36-2003; GB/T 25119-2010; GB/T 25122.1-2010; GB/T 25122.2-2010; GB/T 25123.1-2010; IEC 60850 | | Adopted Standard | IEC 61377-2-2002, MOD | | Regulation (derived from) | National Standard Approval Announcement 2010 No.4 (Total No.159) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard applies to DC motor, combined system and its control system chopper posed. Its purpose is to provide: the chopper, performance characteristics of electric DC motor drive system and associated control system consisting of, test methods to verify these performance characteristics. | GB/T 25117.2-2010: Railway applications -- Rolling stock -- Combined testing -- Part 2: Combined testing of chopper-fed direct current traction motors and their control system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Railway applications Rolling stock Combined testing Part 2.. Combined testing of chopper-fed direct current traction motors and their control system
ICS 29.280
S35
National Standards of People's Republic of China
Rail Locomotive Test Set
Part 2. Chopper-powered DC traction motors
Its combination of test control system
Part 2. Combinedtestingofchopper-feddirectcurrent
(IEC 61377-2.2002, MOD)
Issued on. 2010-09-02
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 2
3 Terms and definitions 2
4 4 environmental conditions
5 combination of system interface and feature 4
5.1 of Interface 4
5.2 specified characteristics 4
Typical Characteristics 5.3 5
5.4 combined system behavior and numerical 5
5.5 Information exchange and responsibilities 8
6 Test Category 8
6.1 Overview 8
6.2 Type tests 9
6.3 Test Study 9
7 Test 9
7.1 Overview 9
7.2 Test conditions 9
7.3 Temperature Rise Test 10
7.4 Commutation Test 10
7.5 Experimental and tolerances 11
11 7.6 Other tests
7.7 Experimental Research 12
7.8 Test Item 13
Appendix A (informative) This section reg with IEC 61377-2.2002 14 reg control
Annex B (informative) users and manufacturers of Protocol Item 15
Foreword
GB/T 25117 "rail rolling stock composition test" consists of the following three parts.
--- Part 1. Combined testing of inverter - fed alternating current motors and their control system;
--- Part 2. chopper powered DC traction motor combination test and its control system;
--- Part 3. Test Set indirect converter fed alternating current motors and their control system.
This section is GB/T Part of 225,117.
This part redrafted modification method using IEC 61377-2.2002 "rail rolling stock composition testing - Part 2.
Chopper DC traction power supply combination test motor and its control system "(in English). This section lists the reg number in Appendix A
List of control clauses No. 2002. with IEC 61377-2.
This part of IEC 61377-2.2002 technical differences exist, these differences involve the terms of the margin with a single vertical line (︱)
It is marked. This part of IEC 61377-2.2002 technical differences and their reasons are as follows.
--- Normative references IEC 60050-811, IEC 60349-1, IEC 60571, IEC 61287-1, IEC 61287-2 respectively for
It should be amended to adopt national standards for the subject alternative;
--- Reference GB/T 25117.1-2010, the combined 3.7 and 3.8 and 3.7;
--- IEC 61377-2 no environmental conditions in compliance with this section to add a chapter, namely "4 environmental conditions";
--- In the middle 7.6.6, IEC 61377-2 regulations interference test See IEC 61287-1.1995 is 2.4.6.23, read in this section
"The test shall GB/T 25122.1-2010 4.2.8 conduct."
For ease of use, this section also made the following editorial changes.
--- "This International Standard" be replaced by "this section";
--- Instead of using as a decimal comma ",". ",";
--- Delete foreword international standards;
--- To increase the numbers in Figure 3.4, the successor of the original drawing number is incremented;
--- Increasing the exemplary voltage source combined system operating range in 7.6.2, making it easy to understand;
--- The IEC 61377-2 6.7 in Table 1, as an individual, that is, "7.8 Test Project";
--- Increase in Appendix A "section of this chapter and shall IEC 61377-2.2002 clauses control."
This section in Appendix A, Appendix B is an informative annex.
This section proposed by the People's Republic of China Ministry of Railways.
This part of the National electric traction equipment and systems Standardization Technical Committee (SAC/TC278) centralized.
This part mainly drafted by. Zhuzhou CSR Times Electric Co., Ltd.
Participated in the drafting of this section. CSR Zhuzhou Electric Locomotive Research Institute Co., Ltd., the new speed Yongji Electric Appliance Co., Ltd.
The main drafters of this section. Ann Liu, Ma Wenjun.
The drafters of some of the participants. Li Yifeng, Zhang Jinfang, Wang eliminated.
Rail Locomotive Test Set
Part 2. Chopper-powered DC traction motors
Its combination of test control system
1 Scope
GB/T 25117 in this section applies to the combination of a DC motor system, chopper and its control system constituted, its purpose is to provide.
--- Performance characteristics of the chopper, DC motors and related control system of electric drive system;
--- Verify the performance characteristics of these test methods.
In the traction drive system, by the presence of a chopper and DC motor system consisting of a combination of mechanical output of the system in combination with
There is no control means between the chopper, since this combination system is not common, and therefore not considered in this section.
a) series excited DC motor combination system
b) a combination of separately-excited DC motor system
NOTE. smoothing reactors considered to be part of the chopper.
Figure 1 traction drive
GB/T 25123.1-2010 applicable to DC motor powered chopper, GB/T 25122.1-2010 for the power electronic converters
Current, GB/T 25119-2010 suitable for electronic devices.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25117.2-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25117.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25117.2-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25117.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|