|
US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24817.2-2021: Cranes - Control layout and characteristics - Part 2: Mobile cranes
Status: Valid GB/T 24817.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24817.2-2021 | English | 264 |
Add to Cart
|
3 days [Need to translate]
|
Cranes - Control layout and characteristics - Part 2: Mobile cranes
| Valid |
GB/T 24817.2-2021
|
| GB/T 24817.2-2010 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Lifting appliances -- Controls -- Layout and characteristics -- Part 2: Mobile cranes
| Obsolete |
GB/T 24817.2-2010
|
PDF similar to GB/T 24817.2-2021
Basic data | Standard ID | GB/T 24817.2-2021 (GB/T24817.2-2021) | | Description (Translated English) | Cranes - Control layout and characteristics - Part 2: Mobile cranes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Word Count Estimation | 14,170 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 24817.2-2021: Cranes - Control layout and characteristics - Part 2: Mobile cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes-Control layout and characteristics-Part 2.Moblie cranes
ICS 53.020.20
CCSJ80
National Standards of People's Republic of China
Replace GB/T 24817.2-2010
The layout and characteristics of crane control device
Part 2.mobile crane
(ISO 7752-2.2011, Cranes-Controllayoutandcharacteristics-
Released on 2021-05-21
2021-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
This document is in accordance with GB/T 1.1-2020 "Guidelines for Standardization Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting of rules.
This document is the second part of GB/T 24817 "Arrangement and Characteristics of Crane Control Devices". GB/T 24817 has been released
The following parts.
---Part 1.General Provisions;
---Part 2.Mobile crane;
---Part 3.Tower crane;
---Part 4.Boom crane;
---Part 5.Bridge and gantry cranes.
This document replaces GB/T 24817.2-2010 "Lifting machinery control device layout and characteristics-Part 2.Mobile lifting
Compared with GB/T 24817.2-2010, except for structural adjustments and editorial changes, the main technical changes are as follows.
a) Changed the scope (see Chapter 1, Chapter 1 of the.2010 edition);
b) The normative references have been changed (see Chapter 2, Chapter 2 of the.2010 edition);
c) The term "driver" has been deleted (see 3.2 in the.2010 edition);
d) The term "control device" has been added (see 3.2);
e) The term "control station" has been added (see 3.3);
f) The requirement for the two-way handle boom of a telescopic crane to push the handle forward is changed (see 5.3, 5.2.3 of the.2010 edition);
g) The simplified diagram of the fixed-length boom crane control device has been changed (see Figure 4, Figure 4 of the.2010 edition);
h) The requirements for the luffing/jib luffing selection switch and handle of fixed-length boom cranes have been added (see 6.2.4);
i) The simplified diagram of the telescopic crane control device has been changed (see Figure 5, Figure 5 of the.2010 edition);
j) The requirements for the vertical direction of the telescopic crane lifting 2 and the slewing control device handle 1 are changed (see 7.2.1.1, 6.2.1 of the.2010 edition);
k) The requirements for the main boom luffing/telescopic/jib luffing selection switch and handle of the telescopic boom crane have been added (see 7.2.3.3);
l) The requirements for the jib luffing control device have been added (see 7.2.4).
The translation method used in this document is equivalent to ISO 7752-2.2011 "The layout and characteristics of crane control devices Part 2.Flow
The basic layout and requirements of mobile cranes.
The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows.
---GB/T 6974.2-2017 Crane Terminology Part 2.Mobile Cranes (ISO 4306-2.2012, IDT)
---GB/T 24817.1-2016 The layout and characteristics of crane control devices Part 1.General (ISO 7752-
1.2010, IDT)
This document has made the following editorial changes.
---In order to be consistent with the existing standard series, the standard name is changed to "Crane Control Device Arrangement and Characteristics Part 2.Flow
Mobile Crane.
This document was proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Hoisting Machinery Standardization Technical Committee (SAC/TC227).
Drafting organization of this document. Xuzhou Heavy Machinery Co., Ltd.
The main drafters of this document. Hu Haipeng, Zhang Yan, Li Xuefeng, Hou Zhengliang, Jiao Guowang, Huang Qing.
The previous versions of this document and the documents replaced are as follows.
---2010 was first published as GB/T 24817.2-2010, this is the first revision.
Introduction
GB/T 24817 "The layout and characteristics of crane control devices" is to standardize the layout and requirements of crane control devices in my country
And the standard of movement direction aims to unify the layout and movement direction of crane control devices in our country, and keep it consistent with the international. By five
Partial composition.
---Part 1.General Provisions. The purpose is to specify the general layout and general requirements of crane control devices.
---Part 2.Mobile cranes. The purpose is to specify the layout and main characteristics of the mobile crane control device.
---Part 3.Tower crane. The purpose is to specify the layout and main characteristics of the tower crane control device.
---Part 4.Boom crane. The purpose is to specify the layout and main characteristics of the jib crane control device.
---Part 5.Bridge and gantry cranes. The purpose is to specify the layout and main
characteristic.
Operators of mobile cranes often need to operate cranes of different models or different manufacturers. This document specifies the basic crane control
The arrangement and action direction of the control device to reduce the operator’s confusion and misoperation in emergency situations.
The layout and characteristics of crane control device
Part 2.mobile crane
1 Scope
This document specifies the layout, requirements and requirements of control devices used for mobile crane slewing, load lifting, boom luffing and telescoping.
The direction of action. Involving the basic layout and requirements of the two-way handle (two-way control device) and the cross shaft handle (multi-directional control device), and
ISO 7752-1 is used together.
This document applies to all mobile cranes defined in ISO 4306-2.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
ISO 4306-2 Crane Terminology Part 2.Mobile Cranes (Cranes-Vocabulary-Part 2.Mobile
cranes)
ISO 7752-1 Crane control device layout and characteristics Part 1.General (Cranes-Control layout and
characteristics-Part 1.Generalprinciples)
3 Terms and definitions
The terms and definitions defined in ISO 4306-2 and the following apply to this document.
3.1
Operator
The person who manipulates the crane to locate the load.
[Source. ISO 7752-1]
3.2
Control
Connect the control device between the crane operator and the crane control system.
[Source. ISO 7752-1]
3.3
Controlstation
A fixed place that controls the operation or stopping of the crane.
[Source. ISO 7752-1]
4 Two-way handle, fixed-length boom crane
The basic control device should be arranged according to Figure 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24817.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 24817.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24817.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24817.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 24817.2-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24817.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|