|
US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24810.5-2009: Cranes -- Limiting and indicating devices -- Part 5: Bridge and gantry cranes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24810.5-2009 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Cranes -- Limiting and indicating devices -- Part 5: Bridge and gantry cranes
| Valid |
GB/T 24810.5-2009
|
PDF similar to GB/T 24810.5-2009
Basic data | Standard ID | GB/T 24810.5-2009 (GB/T24810.5-2009) | | Description (Translated English) | Cranes -- Limiting and indicating devices -- Part 5: Bridge and gantry cranes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 7,711 | | Date of Issue | 2009-12-15 | | Date of Implementation | 2010-07-01 | | Quoted Standard | GB/T 24810.1; GB/T 22437.1-2008 | | Adopted Standard | ISO 10245-5-1995, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 15 of 2009 (No. 155 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: Bridge and gantry cranes load, movement, performance and environmental use limiters and/or indicator requirements. Crane limiter and indicator general requirements GB/T 24810. 1 regulations. | GB/T 24810.5-2009: Cranes -- Limiting and indicating devices -- Part 5: Bridge and gantry cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes.Limiting and indicating devices.Part 5. Bridge and gantry cranes
ICS 53.020.20
J80
National Standards of People's Republic of China
GB/T 24810.5-2009/ISO 10245-5.1995
Crane limiter and indicator
Part 5. Bridge and gantry cranes
(ISO 10245-5.1995, IDT)
Posted 2009-12-15
2010-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 24810 "Cranes - Limiting and indicating" is divided into five sections.
--- Part 1. General;
--- Part 2. Mobile cranes;
--- Part 3. Tower cranes;
--- Part 4. jib cranes;
--- Part 5. Bridge and gantry cranes.
This is Part 5 GB/T 24810 of.
This part identical with ISO 10245-5.1995 "Cranes limiters and indicators - Part 5. Bridge and gantry crane
Machine "(in English).
This section is equivalent translation ISO 10245-5.1995.
For ease of use, this section made the following editorial changes.
--- The term "this part of ISO 10245" with the words "GB/T 24810 in this section";
--- Delete ISO 10245-5.1995 Foreword;
--- Of ISO 10245-5.1995 references to other international standards, with the equivalent has been adopted as a standard in place of the corresponding international
standard.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section drafted by. DHI DCW Group Co., Ltd., Beijing Institute of lifting the transport machinery design.
The main drafters of this section. Guipei Kang, Zhou G, where uranium.
GB/T 24810.5-2009/ISO 10245-5.1995
Crane limiter and indicator
Part 5. Bridge and gantry cranes
1 Scope
This section GB/T 24810 specifies the bridge and gantry crane loads, movement, performance and environmental use of limiters and/or instructions
The requirements.
General requirements for crane limiter and indicator according to GB/T 24810.1 requirements.
2 Normative references
The following documents contain provisions which, through reference GB/T 24810 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 24810.1 crane limiter and indicators - Part 1. General (GB/T 24810.1-2009, ISO 10245-1.
2008, IDT)
GB/T 22437.1-2008 crane loads and load combinations of design principles - Part 1. General (ISO 8686-1. 1989,
MOD)
3 Terms and Definitions
Terms and definitions GB/T 24810.1 established applicable to this section.
4 Lifting capacity limiter
4.1 crane under the following conditions shall be fitted with the rated capacity limiter.
--- Danger of tipping;
--- Cranes may not be expected to carry the load, the load will result in overload institutions and structures.
4.2 rated capacity limiter should be allowed to lift the device with a rated load in order to design the average acceleration Rao accelerated upward movement. Typically, the amount
Given load test, the limiter should be adjusted and fixed at an appropriate value. For the series production of the crane during the plant trial, test
Into account when using the crane bridge deformation, it may be appropriate to set the rated capacity limiter.
4.3 should be dynamic load limiters preventing detection function is in use.
4.4 rated capacity limiter setpoint QL should satisfy the formula (1).
Where.
Rao --- design lifting average acceleration;
QL --- by the lifting of the flexible member (rope, chains, etc.) restricted nominal weight;
QGL --- total starting weight by lifting flexure quality, quality fixed spreader and rated (nominal weight = separable from the weight of the spreader Quality +
Effective from the weight) constituted;
2 --- GB/T 22437.1-2008 in 6.1.2.2.1 for performing amplification factor checking the crane capacity.
4.5 In special cases, bridge and gantry crane lifting capacity and load position in certain areas is restricted to less than the lifting mechanism
GB/T 24810.5-2009/ISO 10245-5.1995
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24810.5-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24810.5-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24810.5-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24810.5-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|