US$134.00 ยท In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24809.5-2009: Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 24809.5-2009 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes
| Valid |
GB/T 24809.5-2009
|
PDF similar to GB/T 24809.5-2009
Basic data Standard ID | GB/T 24809.5-2009 (GB/T24809.5-2009) | Description (Translated English) | Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J80 | Classification of International Standard | 53.020.20 | Word Count Estimation | 7,744 | Date of Issue | 2009-12-15 | Date of Implementation | 2010-07-01 | Quoted Standard | GB 5226.2; GB/T 6974.1; GB/T 24809.1; GB/T 24810.5; ISO 12210-1-1998; ISO 12488-1-2005 | Adopted Standard | ISO 10972-5-2006, IDT | Regulation (derived from) | Announcement of Newly Approved National Standards No. 15 of 2009 | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies: GB/T 6974. 1 defined bridge and gantry cranes and institutional overall layout and design, component selection and design requirements and manufacture, assembly, installation and testing instructions, etc. special requirements related, crane General requirements for bodies by GB/T 24809. 1 regulations. GB/T 24809 This standard does not include the carrying capacity calculation ultimate validation rules in different states. |
GB/T 24809.5-2009: Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes.Requirements for mechanisms.Part 5. Bridge and gantry cranes
ICS 53.020.20
J80
National Standards of People's Republic of China
GB/T 24809.5-2009/ISO 10972-5.2006
Requirements for crane bodies
Part 5. Bridge and gantry cranes
(ISO 10972-5.2006, IDT)
Posted 2009-12-15
2010-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 24809 "Crane institutional requirements" is divided into five sections.
--- Part 1. General;
--- Part 2. Mobile cranes;
--- Part 3. Tower cranes;
--- Part 4. jib cranes;
--- Part 5. Bridge and gantry cranes.
This is Part 5 GB/T 24809 of.
This part identical with ISO 10972-5.2006 "Cranes institutional requirements - Part 5. Bridge and gantry cranes" (English
Version).
This section is equivalent translation ISO 10972-5.2006.
For ease of use, this section made the following editorial changes.
--- The term "this part of ISO 10972" with the words "GB/T 24809 in this section";
--- Delete ISO 10972-5.2006 Foreword;
--- For ISO 10972-5.2006 international standard references, have been adopted as the equivalent of the standard with our standard replaces the corresponding
International standards, the other is not identical with direct reference to international standards for our standards.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This part mainly drafted by. DHI DCW Group Co., Ltd.
The main drafters of this section. Guipei Kang, Wang Xuesong.
GB/T 24809.5-2009/ISO 10972-5.2006
Requirements for crane bodies
Part 5. Bridge and gantry cranes
1 Scope
GB/T 24809 provisions of this part of the GB/T 6974.1 general arrangement and set defined Bridge and gantry cranes and agencies
Guide the design, selection and design requirements as well as parts manufacturing, assembly, installation and testing and other special requirements relating to the description, crane bodies
General requirements according to GB/T 24809.1 requirements.
This section GB/T 24809 does not include verification at different limit states (yield strength, fatigue, wear, etc.) carrying capacity calculations
rule.
2 Normative references
The following documents contain provisions which, through reference GB/T 24809 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB 5226.2 Safety of machinery electrical equipment Part 32. Requirements for hoisting machines (GB 5226.2-2002,
idt IEC 60204-32.1998)
GB/T 6974.1 crane terminology - Part 1. General terms (GB/T 6974.1-2008, ISO 4306-1.2007,
IDT)
GB/T 24809.1 crane institutional requirements - Part 1. General (GB/T 24809.1-2009, ISO 10972-1.
1998, IDT)
GB/T 24810.5 crane limiter and indicators - Part 5. Bridge and gantry cranes (GB/T 24810.5-
2009, ISO 10245-5.1995, IDT)
ISO 12210-1.1998 Part 1 anchoring device Cranes state and non-state. General
ISO 12488-1.2005 Cranes and crane wheels and trolley track tolerances - Part 1. General
3 Terms and Definitions
Terms and definitions GB/T 6974.1 established in this section apply.
4 Requirements
4.1 General Design and Arrangement
4.1.1 General
Institutions should comply with the relevant provisions of GB/T 24809.1 of.
4.1.2 Load Control
Limiters and indicators should be set in line with GB/T 24810.5 of the relevant provisions.
When the limiter malfunction could lead to the stability of the crane is lowered, at least one of the following methods should be used to ensure that the system of
reliability.
Key components a) from the weight of limiter and double system design, or set up a backup limiter;
b) automatic detection system functions;
GB/T 24809.5-2009/ISO 10972-5.2006
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24809.5-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24809.5-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24809.5-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24809.5-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|