|
US$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24737.4-2012: Guide for technological management -- Part 4: Design of process program
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24737.4-2012 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Guide for technological management -- Part 4: Design of process program
| Valid |
GB/T 24737.4-2012
|
PDF similar to GB/T 24737.4-2012
Basic data | Standard ID | GB/T 24737.4-2012 (GB/T24737.4-2012) | | Description (Translated English) | Guide for technological management -- Part 4: Design of process program | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J30 | | Classification of International Standard | 25.020 | | Word Count Estimation | 6,688 | | Quoted Standard | GB/T 4863-2008, GB/T 24737.6-2012 | | Regulation (derived from) | National Standards Bulletin No. 9 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the process design principles, basis, the classification process scheme, content and design, examination and approval procedures. This section applies to mechanical product design process. | GB/T 24737.4-2012: Guide for technological management -- Part 4: Design of process program---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS25.020
J30
National Standards of People's Republic of China
Technological management
Part 4. Process Design
Guidefortechnologicalmanagement-Part 4. Designofprocessprogram
Issued on. 2012-05-11 2012-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 24737 "technological management" is divided into nine sections.
--- Part 1. General;
--- Part 2. Product craft work program;
--- Part 3. Product Structure Process review;
--- Part 4. Process design;
--- Part 5. Process Planning;
--- Part 6. process optimization and technology assessment;
--- Part 7. Process Quota;
--- Part 8. Process Validation;
--- Part 9. production site process management.
This is Part 4 GB/T 24737 in.
This standard rule according to GB/T 1.1-2009 given draft.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This section is drafted. the machine Productivity Promotion Center, Beijing Benz Automotive Co., Ltd., Beijing Second Machine Tool Plant Co., Ltd., Jinan heavy
Engineering Co., Ltd., State Key Laboratory for Advanced Materials Technology equipment, Chongqing Dajiang Xinda Vehicles Co., Ltd.
The main drafters of this section. Xi Daoyun, Analytical Instrumentation, Lin Guizhi, Zhang Xiulan, ZHANG Xiu-fen, Yangjia Fang, Eyup ripple, single Zhongde, Jiang Shiqing.
Technological management
Part 4. Process Design
1 Scope
This section GB/T 24737 requirements process design principles, basis, program classification process, content and design approval process
Sequence and so on.
This section applies to mechanical product design process.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4863-2008 Machinery Manufacturing Technology Basic Terminology
GB/T 24737.6-2012 technological management - Part 6. Process Optimization and Process Review
3 Terms and Definitions
GB/T 4863-2008 defined terms and definitions apply to this document.
4 Process Design Principles
4.1 Product Process program guide technology products based on preparatory work, machinery products should generally have a technology program.
4.2 Technological solutions to ensure the quality of products, should fully consider the type of production, production cycle and production cost, and meet production safety
And green manufacturing requirements.
4.3 enterprise capabilities, active use of advanced manufacturing technology and process equipment, and constantly improve product design and manufacturing processes
Level.
5 Process design basis
Process design based primarily on.
--- Product design drawings, technical documentation and user requirements;
--- Production capacity and production program;
--- The production cycle and the quality and cost targets;
--- Domestic and foreign similar products of advanced manufacturing technology;
--- For technical policies and standards;
--- Business-to-product process work requirements.
|