|
US$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24736.3-2009: Management guide for tooling design -- Part 3: Procedure for tooling design
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24736.3-2009 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Management guide for tooling design -- Part 3: Procedure for tooling design
| Valid |
GB/T 24736.3-2009
|
PDF similar to GB/T 24736.3-2009
Basic data | Standard ID | GB/T 24736.3-2009 (GB/T24736.3-2009) | | Description (Translated English) | Management guide for tooling design -- Part 3: Procedure for tooling design | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J40 | | Classification of International Standard | 25.060.20 | | Word Count Estimation | 6,665 | | Date of Issue | 2009-11-30 | | Date of Implementation | 2010-09-01 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.14 (Total No.154) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the process equipment design (tooling design) program. This section applies to mechanical manufacturing process and equipment design. | GB/T 24736.3-2009: Management guide for tooling design -- Part 3: Procedure for tooling design---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Management guide for tooling design Part 3. Procedure for tooling design
ICS 25.060.20
J40
National Standards of People's Republic of China
Process Equipment Design Management Guidelines
Part 3. Process Equipment Design Program
Posted 2009-11-30
2010-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 24736 "Process Equipment Design Management Guide" is divided into four parts.
--- Part 1. Terminology;
--- Part 2. Process design and equipment selection rules;
--- Part 3. process equipment design process;
--- Part 4. process equipment validation rules.
This section GB/T Part of 324,736.
Appendix A of this section is an informative annex.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This section is drafted. the machine Productivity Promotion Center, State Key Laboratory for Advanced Materials Technology and Equipment, Shanghai Research Institute of Materials, heavy
Chongqing Dajiang Xinda Vehicles Co., Ltd.
The main drafters of this section. Xidao Yun, Ding Hongyu, single Zhongde, ZHANG Xiu-fen, Jinyu Fei, Jiang Shiqing, Hanlin Lin, Xiao Chengxiang.
Process Equipment Design Management Guidelines
Part 3. Process Equipment Design Program
1 Scope
This section GB/T 24736 specifies the process equipment design (tooling design) program.
This section applies to machinery and equipment manufacturing process design.
2 tooling design basis
Tooling design basis typically include.
--- Tooling design task book;
--- Process planning;
--- Product drawings and technical conditions;
--- Relevant national standards, industry standards and business standards;
--- Typical domestic and foreign design and tooling information;
--- Related equipment manuals;
--- Production technology conditions.
3 tooling design principles
3.1 tooling design must meet the technical requirements, structural performance, reliable, safe, easy to operate, is conducive to high-quality, high efficiency, low consumption, ring
Paul, improve working conditions, improve tooling standardization, universal, serialized level.
3.2 tooling design should consider the use of a combination of design and the introduction of environmental factors.
3.3 tooling design to in-depth on-site, with practice. Major, determining the critical tooling design, should be widely consulted, and by program
It can be carried out after the design review approval.
3.4 tooling design drawings must ensure that clear, complete and accurate, uniform.
3.5 pairs of sophisticated, major, special tooling shall be accompanied by the use of the specification and design calculations.
4 tooling design process
Tooling design program in Appendix A.
4.1 research, analyzes tooling design plan
Research, analyzes tooling design task book, and its proposed amendments.
4.2 are familiar pattern workpiece
4.2.1 familiar with the product to be processed in the role of being the structural characteristics of the workpiece, the main accuracy and technical conditions.
4.2.2 familiar with the workpiece material, rough type, quality and dimensions and so on.
4.3 are familiar with process scheme workpiece, process planning
4.3.1 is familiar with the process route workpiece.
4.3.2 are familiar with thermal treatment of the workpiece.
4.3.3 familiar with the process equipment models, specifications, the main parameters and status intact.
4.4 check tooling design task book
4.5 survey, test
Inside and outside the enterprise to collect information and make the necessary technological experiments; and to seek the views of the person concerned, according to the research needs of the organization.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24736.3-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24736.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24736.3-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24736.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|