|
US$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24648.2-2009: Reliability assessment of engineering and agricultural machine -- Evaluation parameter system and failure classification code
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24648.2-2009 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Reliability assessment of engineering and agricultural machine -- Evaluation parameter system and failure classification code
| Valid |
GB/T 24648.2-2009
|
PDF similar to GB/T 24648.2-2009
Basic data | Standard ID | GB/T 24648.2-2009 (GB/T24648.2-2009) | | Description (Translated English) | Reliability assessment of engineering and agricultural machine -- Evaluation parameter system and failure classification code | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T60 | | Classification of International Standard | 65.060.10 | | Word Count Estimation | 8,872 | | Date of Issue | 2009-11-15 | | Date of Implementation | 2010-05-01 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.13 (Total No.153) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the evaluation of product reliability engineering in agricultural terms and definitions, fault classification, fault judgment rule and reliability for the evaluation index system. This section applies to works of agricultural products (including machine, Parts) user surveys and test chamber, analysis and evaluation of the reliability of test results outside. | GB/T 24648.2-2009: Reliability assessment of engineering and agricultural machine -- Evaluation parameter system and failure classification code
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reliability assessment of engineering and agricultural machine. Evaluation parameter system and failure classification code
ICS 65.060.10
T60
National Standards of People's Republic of China
Engineering Reliability Assessment of agricultural products
Evaluation Index System and General fault classification
Posted 2009-11-15
2010-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee tractor (SAC/TC140) centralized.
This section drafted by. National Tractor Quality Supervision and Inspection Center.
The main drafters of this section. Li Yong, Yan Fang, Sun Panpan, Rui Xu.
Engineering Reliability Assessment of agricultural products
Evaluation Index System and General fault classification
1 Scope
This section GB/T 24648 specifies the agricultural product reliability engineering for the evaluation of the terms and definitions, fault classification, fault diagnosis
Rules and reliability for the evaluation index system.
This section applies to engineering of agricultural products (including machine, spare parts) user surveys and testing of indoor and outdoor reliability of test results points
Analysis and Evaluation.
2 Terms and definitions
The following terms and definitions apply to this section.
2.1
Machinery for agriculture and agricultural engineering job field operations.
Such as for agricultural field work products are tractors, harvesters and other; for agricultural engineering jobs are agricultural loaders, agricultural Mining
Machines.
2.2
The deterioration of the product or its components can not perform its required function or performance indicators to all phenomena exceeds a predetermined range.
2.3
Under the conditions of use prescribed, because of their inherent product defects caused by the fault.
Parts such as excessive deformation, fracture, early wear and fatigue, abnormal corrosion and aging, loose fasteners or failure or performance degradation over
Limit and the "three leakage" and so on.
2.4
By some parts of the defective product directly or indirectly caused by a defective product to other parts, or because of the nature of the fault resulted pie
A fault.
Because such as engine connecting rod bolt fracture connecting rods, bearings, piston and cylinder damage caused by a series of parts, the connecting rod bolt fracture
Intrinsically fault; other parts of the damage caused thereby are called subordinate fault.
2.5
Operator fails to the instructions for use and failures caused by operation.
For example, the operator fails to specification requirements or refuel with water, which led to engine overheating, hold cylinder; operator without changing parts Junction
Configuration or adjustment of status, resulting in overload use damaged parts.
3 fault classification
3.1 Products by Category failure modes are.
a) product performance degradation;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24648.2-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24648.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24648.2-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24648.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|