|
US$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24642-2009: Running-in procedures for belt-driven wheeled tractors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24642-2009 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Running-in procedures for belt-driven wheeled tractors
| Valid |
GB/T 24642-2009
|
PDF similar to GB/T 24642-2009
Basic data | Standard ID | GB/T 24642-2009 (GB/T24642-2009) | | Description (Translated English) | Running-in procedures for belt-driven wheeled tractors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T61 | | Classification of International Standard | 65.060.10 | | Word Count Estimation | 5,565 | | Date of Issue | 2009-11-15 | | Date of Implementation | 2010-05-01 | | Quoted Standard | JB/T 7282 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.13 (Total No.153) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the run- belt drive wheeled tractors terms and definitions, technical requirements and Running. This standard applies to the production of new belt drive wheeled tractors (hereinafter referred to as the tractor). | GB/T 24642-2009: Running-in procedures for belt-driven wheeled tractors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Running-in procedures for belt-driven wheeled tractors
ICS 65.060.10
T61
National Standards of People's Republic of China
Running procedures belt drive wheeled tractors
Posted 2009-11-15
2010-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee tractor (SAC/TC140) centralized.
This standard was drafted. Heilongjiang Agricultural Machinery Testing Station.
The main drafters of this standard. in Chunhui, Guo Xuefeng, Qinen Bin.
Running procedures belt drive wheeled tractors
1 Scope
This standard specifies the belt drive wheeled tractor Running terms and definitions, technical requirements and Running.
This standard applies to the production of new belt drive wheeled tractors (hereinafter referred to as tractors).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
JB/T 7282 tractor oil varieties, specifications selection
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Operation of the new production and assembly of the tractor according to the provisions of the requirements.
4. Technical Requirements
4.1 Running Check before
4.1.1 Check the tractor external bolts, nuts and screws tightening torque, if loose should be tightened.
4.1.2 Check engine oil pan, gearbox, oil level in the pump and a hydraulic lifter oil level should be less than additional press run
Provisions sliding table for filling grease or oil lubrication.
Filling volume 4.1.3 Inspect the fuel and coolant, check the V-belt tensioning extent.
4.1.4 check the tire pressure is normal.
4.1.5 check the electrical wiring is connected properly and reliably.
4.1.6 Check the joystick is flexible and reliable.
4.2 General requirements for run-in
4.2.1 Running in the running should be strictly in accordance with specifications, the oil run-time selection should be consistent with the provisions of JB/T 7282's.
4.2.2 After the run, the tractor should immediately conduct a comprehensive technical maintenance, before being transferred to normal use.
4.3 Maintenance after running
4.3.1 should be released after stopping the engine oil sump tank in a hot vehicle state, with the amount of light diesel oil or kerosene oil pan, mechanical
Oil filter, fuel filter, oil filter, air filter, and inject new oil.
4.3.2 release status in a hot vehicle driveline, to enhance the lubricating oil while adding an appropriate amount of light diesel oil or kerosene. The front tractor, rear wheel lift
Starting from the ground, before the two directions of rotation, the rear wheel 3min. Immediately release the cleaning solution. At the same time remove the lifter for cleaning and re-installed
After filling according to the provisions of the new drive train lubricants.
4.3.3 release of coolant, the coolant clean after use cleaning engine cooling system, adding new coolant.
4.3.4 Check the front toe, check the clutch, brake and free travel clearance, and adjust if necessary.
4.3.5 Check all external bolts, nuts and screws are secure.
4.3.6 Grease according to instructions to maintain each site maintenance of the tractor.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24642-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24642-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24642-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24642-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|