|
US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24637.2-2020: Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24637.2-2020 | English | 339 |
Add to Cart
|
4 days [Need to translate]
|
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
| Valid |
GB/T 24637.2-2020
|
PDF similar to GB/T 24637.2-2020
Basic data | Standard ID | GB/T 24637.2-2020 (GB/T24637.2-2020) | | Description (Translated English) | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 18,118 | | Date of Issue | 2020-04-28 | | Date of Implementation | 2020-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 24637.2-2020: Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS)-General concepts--Part 2.Basic tenets, specifications, operators, uncertainties and ambiguities
ICS 17.040.30
J04
National Standards of People's Republic of China
Replace GB /Z 24637.2-2009
Product Geometric Technical Specification (GPS) General Concept
Part 2.Basic principles, specifications, operation set and
uncertainty
(ISO 17450-2..2012, MOD)
2020-04-28 release
2020-11-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Basic principles 9
5 Influence of uncertainty on basic principles 9
6 Specification process 10
7 Inspection process 11
Appendix A (Informative Appendix) Concept Figure 12
Appendix B (informative appendix) Drawing annotation 13
Appendix C (Informative Appendix) Relationship with GPS Matrix Model 14
Reference 15
Foreword
GB/T 24637 "General Concept of Product Geometric Technical Specifications (GPS)" is divided into 4 parts.
--- Part 1.Geometry specification and inspection model;
--- Part 2.Basic principles, specifications, operation set and uncertainty;
--- Part 3.The measured elements;
--- Part 4.Quantification of GPS deviations of geometric features.
This part is Part 2 of GB/T 24637.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB /Z 24637.2-2009 "Product Geometrical Technical Specifications (GPS) General Concept Part 2.Basic Principles, Regulations
`` Fan, operation set and uncertainty '', compared with GB /Z 24637.2-2009, the main technical changes are as follows.
--- Deleted the definition of "measurement characteristic deviation" (see.2009 version 3.1.1);
--- Deleted the definition of "measurement uncertainty" (see 3.4.2 of the.2009 edition);
--- Deleted the definition of "in accordance with uncertainty" (see.2009 version 3.4.7);
--- Change "Relevant Uncertainty" to "Functional Description Uncertainty" (see 3.3.3,.2009 version 3.4.4);
--- Modify the definition of "default specification operation" (see 3.1.2, 3.2.2 of.2009 edition);
--- Modify the definition of "ideal inspection operation" (see 3.1.6,.2009 version 3.2.6);
--- Modify the definition of "default specification operation set" (see 3.2.6,.2009 version 3.3.6).
This part uses the redrafting method to modify the adoption of ISO 17450-2..2012 "Geometric Technical Specifications of Products (GPS) General Concept No. 2
Part. Basic Principles, Norms, Operation Set and Uncertainty.
There are technical differences between this part and ISO 17450-2..2012.The corresponding technical differences and their causes are as follows.
--- With regard to normative quotation documents, this part has been adjusted with technical differences to adapt to my country's technical conditions and adjustments
The situation is reflected in Chapter 2 "Regulatory Reference Documents", with specific adjustments as follows.
● Added GB/T 18779.1;
● Replace ISO 14253-2..2011 with GB/T 18779.2 equivalent to international standards;
● Replace ISO 14978..2006 with GB/T 24634 equivalent to international standards;
● Replace ISO 14660-1..1999 and ISO 17450-1..2011 with GB/T 24637.1 modified to adopt international standards;
● Replace ISO /IEC Guide98-3..2008 with GB/T 27418 modified to adopt international standards;
● Use JJF1001 instead of ISO /IEC Guide99..2007.
This part is proposed and managed by the National Product Geometry Technical Standardization Technical Committee (SAC/TC240).
This section was drafted by. Zhengzhou University, China Machine Productivity Promotion Center, Beijing Ruichi Hengye Instrument Technology Co., Ltd, Carl Zeiss (on
Hai) Management Co., Ltd., Beijing Automobile Co., Ltd., Henan University of Technology.
The main drafters of this section. Ming Cuixin, Zheng Peng, Han Dingzhong, Zhao Fengxia, Teng Lijing, Chen Gang, Zhu Yue, Liu Nanyi.
The previous versions of the standard replaced by this part are as follows.
--- GB /Z 24637.2-2009.
Product Geometric Technical Specification (GPS) General Concept
Part 2.Basic principles, specifications, operation set and
uncertainty
1 Scope
This part of GB/T 24637 defines and specifications, operations, operation sets and inaccuracies used in the product geometric technical specification (GPS) standard
Terms related to grading, give the basic principles of GPS system, and discuss the impact of uncertainty in these principles
Specification and inspection process in GPS applications.
This section applies to the standard operation and inspection operation of geometric products.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 18779.1 Technical Specification for Product Geometric Quantity (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 1.Inspection according to specifications
Judgment rules for pass or fail (GB/T 18779.1-2002, eqvISO 14253-1..1998)
GB/T 18779.2 Technical Specification for Product Geometric Quantity (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2.Measuring Equipment
Guidance on the uncertainty assessment of GPS measurement in calibration and product inspection (GB/T 18779.2-2004, ISO /T S14253-2..1999, IDT)
GB/T 24634 Product Geometric Technical Specifications (GPS) General Concepts and Requirements for GPS Measuring Equipment (GB/T 24634-2009,
(ISO 14978..2006, IDT)
GB/T 24637.1 Geometrical Product Specification (GPS) General Concept Part 1.Geometric Specification and Inspection Model
(GB/T 24637.1-2020, ISO 17450-1..2011, MOD)
GB/T 27418 Evaluation and presentation of measurement uncertainty (GB/T 27418-2017, ISO /IEC Guide98-3..2008, MOD)
JJF1001 General Measurement Terms and Definitions
3 Terms and definitions
GB/T 18779.2, GB/T 24634, GB/T 24637.1, GB/T 27418, JJF1001 and the following terms and definitions apply
Used in this document. Appendix A, Figure A.1, describes the relationship between these terms.
3.1 Terms related to operation
3.1.1
Specification operation
Use mathematical expressions, geometric expressions or algorithms, or a combination of them to define the operation of the specification section.
Note 1.Specification operation is part of the specification operation set (3.2.3), used to define a GPS requirement for a workpiece (product or part).
Note 2.Standard operation is a theoretical concept.
Example 1.In the shaft diameter specification, the smallest circumscribed cylinder is used for fitting.
Example 2.In the specification of surface structure requirements, Gaussian filter is used for filtering.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24637.2-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 24637.2-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24637.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24637.2-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|