|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24537-2025: Fall protection - Guided type fall arrester including a flexible anchor line
Status: Valid GB 24537: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 24537-2025 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Fall protection - Guided type fall arrester including a flexible anchor line
| Valid |
GB 24537-2025
|
| GB/T 24537-2009 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Personal fall protection equipment -- Guided type fall arrester including a flexible anchor line
| Valid |
GB/T 24537-2009
|
Basic data | Standard ID | GB 24537-2025 (GB24537-2025) | | Description (Translated English) | Fall protection - Guided type fall arrester including a flexible anchor line | | Sector / Industry | National Standard | | Classification of Chinese Standard | C73 | | Classification of International Standard | 13.340.99 | | Word Count Estimation | 22,237 | | Date of Issue | 2025-08-29 | | Date of Implementation | 2026-09-01 | | Older Standard (superseded by this standard) | GB/T 24537-2009 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | GB 24537-2025: Fall protection - Guided type fall arrester including a flexible anchor line---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB24537-2025
ICS 13.340.99
CCSC73
National Standard of the People's Republic of China
Replaces GB/T 24537-2009
Self-locking device for flexible guide rails of fall protection belts
Released on August 29, 2025
Implementation on September 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical Requirements 2
5 Test Method 3
6 Inspection Rules 11
7 Permanent Marking11
8 Information provided by the manufacturer11
Appendix A (Informative) Schematic diagram of the self-locking device with flexible guide rail 12
Appendix B (Normative) Inspection Rules 13
Reference 14
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 24537-2009 "Self-locking devices for flexible guide rails of fall protection belts" and is consistent with GB/T 24537-2009.
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The scope has been changed (see Chapter 1, Chapter 1 of the.2009 edition);
b) The definitions of self-locking device, flexible guide rail, connecting rope, connector, and fall distance have been changed (see 3.1, 3.2, 3.4, 3.6, 3.12,.2009
Versions 3.2, 3.1, 3.6, 3.5, and 3.9);
c) The definitions of safety rope, buffer, opening device and descent distance have been deleted (see 3.3, 3.4, 3.7 and 3.8 of the.2009 edition);
d) Added self-locking device with flexible guide rail, buffer device, blocking device, maximum rated load, minimum rated load, guide bracket, lock
Terms and definitions of stopping distance (see 3.3, 3.5, 3.7 to 3.11);
e) Change “General Principles” and “General Requirements” to “Design and Construction” (see 4.1, 4.1 and 4.2 of the.2009 edition);
f) The overall static performance technical requirements and test methods have been modified (see 4.2.1, 5.2.1, and 4.3 and 5.1 of the.2009 edition);
g) Added technical requirements and test methods for static performance of buffer devices (see 4.2.2 and 5.2.2);
h) The technical requirements and test methods for static performance of guide rails have been modified (see 4.2.3, 5.2.3, and 4.5 and 5.3 of the.2009 edition);
i) Changed “overall dynamic load performance” to “dynamic performance” and changed the technical requirements and test methods (see 4.3,
5.3, 4.4 and 5.2 of the.2009 edition);
j) The technical requirements for “locking performance under special circumstances” have been modified (see 4.6, 4.8 of the.2009 edition);
k) The test method has been changed (see Chapter 5, Chapter 5 of the.2009 edition);
l) Change “marking” to “permanent marking” (see Chapter 7, 7.1 and 7.2 of the.2009 edition);
m) The content of “Information provided by the manufacturer” has been changed (see Chapter 8, 7.3 of the.2009 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the Ministry of Emergency Management of the People's Republic of China.
The previous versions of this document and the documents it replaces are as follows.
---First published in.2009 as GB/T 24537-2009;
---This is the first revision.
Self-locking device for flexible guide rails of fall protection belts
1 Scope
This document specifies the technical requirements, inspection rules, permanent marking and information to be provided by the manufacturer for self-locking devices with flexible guide rails.
Corresponding test methods.
This document applies to self-locking devices with flexible guide rails installed within an angle of 15° from the vertical direction.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB 6095 Fall protection safety belt
GB/T 10125 Artificial atmosphere corrosion test Salt spray test
GB/T 12903 Terminology of Personal Protective Equipment
GB 23469 Fall protection connector
3 Terms and Definitions
The terms and definitions defined in GB/T 12903 and the following apply to this document.
3.1
A component attached to the guide rail that can slide along the guide rail as the user moves, and the falling action triggers a braking effect.
3.2
Flexible guide rail flexible anchor line
When in use, the self-locking device (3.1) is hung on the flexible connecting part of the upper hanging point, and the self-locking device (3.1) slides on the guide rail. When falling, the self-locking device can be locked in
On the guide rail.
Note. Flexible guide rails are usually fiber ropes, wire ropes or webbings.
3.3
A component consisting of a self-locking device (3.1) and a flexible guide rail (3.2) forming part of a fall protection system.
Note. The self-locking device and flexible guide rail are tested, confirmed and used as a whole. See Appendix A for a schematic diagram of the structure.
3.4
connecting line
Part used to connect the self-locking device (3.1) and the lacing connection point.
Note. The connecting rope is usually a safety rope, a buffer device, a connector or any combination of the three.
3.5
A component used to absorb impact energy in a self-locking device (3.1) with a flexible guide rail (3.2).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24537-2025_English be delivered?Answer: Upon your order, we will start to translate GB 24537-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 24537-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 24537-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 24537-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 24537-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|