|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24327-2009: Pulps -- Laboratory wet disintegration -- Disintegration of chemical pulps
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24327-2009 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Pulps -- Laboratory wet disintegration -- Disintegration of chemical pulps
| Valid |
GB/T 24327-2009
|
PDF similar to GB/T 24327-2009
Basic data | Standard ID | GB/T 24327-2009 (GB/T24327-2009) | | Description (Translated English) | Pulps -- Laboratory wet disintegration -- Disintegration of chemical pulps | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y30 | | Classification of International Standard | 85-010 | | Word Count Estimation | 8,831 | | Date of Issue | 2009-09-30 | | Date of Implementation | 2010-02-01 | | Adopted Standard | ISO 5263-1-2004, MOD | | Regulation (derived from) | National Standard Approval Announcement 2009 No.10 (Total No.150) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the instruments and laboratory equipment wet chemical pulp dissociation, specimen preparation, test procedures and test reports. This standard applies to all kinds of chemical pulp, including recycled pulp. This standard does not apply to mechanical pulp, and some very long fiber chemical pulp, such as cotton pulp or a similar substance made ??from the pulp. | GB/T 24327-2009: Pulps -- Laboratory wet disintegration -- Disintegration of chemical pulps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Laboratory wet disintegration. Disintegration of chemical pulps
ICS 85-010
Y30
National Standards of People's Republic of China
Laboratory wet pulp dissociation
Chemical pulp dissociation
(ISO 5263-1.2004, MOD)
Posted 2009-09-30
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 5263-1.2004 "Pulp Laboratory wet solution from Part 1. chemical pulp dissociation" (in English).
This standard ISO 5263-1. Compared to 2004, the main technical differences are as follows.
--- A sense of balance amount to ± 0.1g;
--- With GB/T 462 "Paper, paperboard and pulp - Determination of water sample for analysis" instead of ISO 287. 1985, MOD and ISO 638.
1978, MOD.
Appendix A of this standard is a normative appendix, Appendix B is an informative annex.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee of the paper industry.
This standard was drafted. China Pulp and Paper Research Institute, the national paper quality supervision and inspection center, China Paper Association Professional Committee of Standardization
Members will.
The main drafters of this standard. Records.
Laboratory wet pulp dissociation
Chemical pulp dissociation
1 Scope
This standard specifies the instruments and laboratory equipment chemical pulp wet dissociation, specimen preparation, test procedures and test reports.
This standard applies to all kinds of chemical pulp, including recycle pulp.
This standard does not apply to mechanical pulp, and some very long fiber chemical pulp, such as cotton pulp or similar material made of paper pulp.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008; ISO 287. 1985, MOD;
ISO 638. 1978, MOD)
GB /pulp slurry concentration measurement T 5399 (GB/T 5399-2004, ISO 4119.1995, IDT)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
In the water for free in the slurry, entangled fibers mechanically treated to separate from each other, but without changing its structural properties.
4 instruments and equipment
Common laboratory equipment as well as the following items.
4.1 Standard dissociation unit, see Appendix A.
Note. Standard dissociation device checks in Appendix B.
4.2 balance, which should reach a sense of ± 0.1g.
Standard 4.3 Water. distilled or deionized water or equivalent purity.
Preparation 5 samples
5.1 For the wet pulp and dried pulp, oven-dry matter content should be determined in accordance with the provisions of GB/T 462's. For liquid slurry should be in accordance with GB/T 5399
Determination of the provisions of the absolute dry matter content.
5.2 If the liquid slurry concentration is less than 1.5% (mass percentage), it should be concentrated to an appropriate volume, caution should avoid fiber damage
Loss. The easiest method is to remove part of the water settlement suspension to be put through a filter paper on a Buchner funnel to dehydration.
5.3 In some tests, the pulp drainage performance is very important, and you should use the standard water (4.3) dissociation pulp. In the dissociation of the entire pulp
Process, should use the standard water.
Solutions should be taken from each 5.4 equivalent (30.0 ± 0.5) g absolute dry mass of the specimen. For pulp, not by cutting to sampling, and should
Prevent access to the sample at the cutting edge.
5.5 If the absolute dry matter content of the pulp sample is greater than or equal to 20% of applications 1L ~ 1.5L (20 ± 5) ℃ water immersion standard samples, the minimum
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24327-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24327-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24327-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24327-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|