US$279.00 · In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23773-2009: Common methods of inorganic chemical products ammonium content of Nessler reagent colorimetric determination Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 23773-2009 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Common methods of inorganic chemical products ammonium content of Nessler reagent colorimetric determination
| Valid |
GB/T 23773-2009
|
PDF similar to GB/T 23773-2009
Basic data Standard ID | GB/T 23773-2009 (GB/T23773-2009) | Description (Translated English) | Common methods of inorganic chemical products ammonium content of Nessler reagent colorimetric determination | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | G10 | Classification of International Standard | 71.060.01 | Word Count Estimation | 12,116 | Date of Issue | 2009-05-13 | Date of Implementation | 2010-01-01 | Regulation (derived from) | PRC National Standard Approval Announcement 2009 No.6 (Total No.146) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the general method of inorganic chemical products Determination of ammonium Nessler reagent colorimetric method feeds, safety tips, general provisions, reagents, instruments, equipment, analysis steps and calculations. This standard applies to the determination of trace inorganic chemicals ammonium ions. 100mL volume of the test solution, the ammonium ion concentration p (NH4) <2mg/L. The test solution volume of 100mL, the visual method detection limit was 0. 02mg/L. Spectrophotometry using an optical path length of 1cm cuvette, the minimum detectable concentration of 0. 05mg/L. When p (NH4) = 1. 0mg/L, the sensitivity is approximately 0. 2 absorbance units. |
GB/T 23773-2009: Common methods of inorganic chemical products ammonium content of Nessler reagent colorimetric determination ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Common methods of inorganic chemical products ammonium content of Nessler's reagent colorimetric determination
ICS 71.060.01
G10
National Standards of People's Republic of China
General method for the determination of ammonium inorganic chemical products
Nessler's reagent colorimetric
Posted 2009-05-13
2010-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Appendix A of this standard and Appendix B is an informative annex.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee chemical inorganic chemicals Club (SAC/TC63/SC1) centralized.
This standard is mainly drafted by. Fluoride Chemicals Co., Ltd., CNOOC Tianjin Chemical Research & Design Institute, Tianjin Entry-Exit Inspection and
Quarantine Bureau.
The main drafters of this standard. Wang Jianping, Shi Xiuhua, Lu Siwei, Lu Gang, Liu Jun.
This standard is the first release.
General method for the determination of ammonium inorganic chemical products
Nessler's reagent colorimetric
1 Scope
This standard specifies the general method of inorganic chemical products Determination of ammonium Nessler reagent colorimetric method feeds, safety tips, general
Regulations, reagents, instruments, equipment, analytical procedures and the results of calculations.
This standard applies to the determination of trace inorganic chemical products, ammonium ions. 100mL of test solution volume, the concentration of ammonium ion
ρ (NH4) ≤2mg/L. The test solution volume of 100mL, the visually minimum detectable concentration of 0.02mg/L. Using spectrophotometry
Optical path length 1cm cuvette, the minimum detectable concentration of 0.05mg/L. When ρ (NH4) = 1.0mg/L, the sensitivity is about 0.2
Absorbance units.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
Preparation of HG/T 3696.2 inorganic chemical products, chemical analysis of impurity standard solution
Preparations of HG/T 3696.3 inorganic chemical products, chemical analysis
3 Method summary
In alkaline solution, the free ammonia or ammonium bound Nessler reagent to produce a light yellow to reddish brown insoluble compound. Ammonium content
Higher, and the resultant reddish-brown precipitation; ammonium content is low, the formation of a stable suspension, the available visual colorimetry standard than liquid ratio on
Or spectrophotometry.
4 Safety Tips
Reagents used in this test method are toxic or corrosive, the operator must be careful! Such as water splashed on the skin should immediately
Flushing, severe cases should be treated immediately.
5 General Provisions
This standard reagents and water, did not indicate when the other requirements, refer to analytically pure reagents and GB/T 6682-2008 specified three
Grade water.
Impurity standard solution, preparations and products needed to test, in the absence of other requirements specified according to HG/T 3696.2, HG/T 3696.3
Provisions prepared.
6 Reagents
6.1 No ammonia;
6.2 Sodium hydroxide solution. 320g/L.
6.3 Ammonium standard solution Ⅰ. 1mL solution containing ammonium (NH4) 0.10mg;
Pipette Pipette 10mL ammonium standard solution according to HG/T 3696.2 prepared, placed in 100mL volumetric flask, dilute to the mark with water
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23773-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23773-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 23773-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23773-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|