|
US$514.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23718.5-2024: Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23718.5-2024 | English | 514 |
Add to Cart
|
5 days [Need to translate]
|
Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst
| Valid |
GB/T 23718.5-2024
|
PDF similar to GB/T 23718.5-2024
Basic data | Standard ID | GB/T 23718.5-2024 (GB/T23718.5-2024) | | Description (Translated English) | Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.160 | | Word Count Estimation | 26,221 | | Date of Issue | 2024-12-31 | | Date of Implementation | 2025-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 23718.5-2024: Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National Standard of the People's Republic of China
ICS 17.160CCS J 04
Machine Condition Monitoring and Diagnosis
Requirements for personnel qualifications and personnel assessment
Part 5.Lubricant laboratory technicians/
Analyst
Condition monitoring and diagnostics of machines-
Part 5.Lubricant laboratory technician/analyst
(ISO 18436⁃5.2012, IDT)
2024-12-31 Release
2025-07-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface Ⅲ
Introduction Ⅳ
1 Scope...1
2 Normative references ...1
3 Terms and Definitions 4
4 Personnel Level (Laboratory Lubricant Analysis) ...4
4.1 General Principles 4
4.2 Level Ⅰ...5
4.3 Level II...5
4.4 Level III...5
5 Qualifications 6
5.1 General Principles 6
5.2 Education 6
5.3 Training 6
5.4 Experience 6
6 Examination...7
6.1 Examination Contents 7
6.2 Implementation of the Examination 7
Appendix A (Normative) Requirements for training courses for lubricant laboratory analysts 8
A.1 Training Outline 8
A.2 Detailed list of sub-items and lesson hours 8
A.3 Comparison of equivalence between national/international standards and ASTM information 14
References ...17
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting is required.
This document is part 5 of GB/T 23718 "Requirements for the qualifications and assessment of personnel for machine condition monitoring and diagnostics".
The following parts have been published.
--Part 1.Requirements for certification bodies and certification processes;
--Part 2.Vibration condition monitoring and diagnosis;
--Part 3.Requirements for training organizations and training processes;
--Part 4.On-site lubricant analysis;
--Part 5.Lubricant laboratory technicians/analysts;
--Part 6.Acoustic emission;
--Part 7.Thermal imaging.
This document is equivalent to ISO 18436-5.2012 "Requirements for qualifications and personnel assessment of machine condition monitoring and diagnostics Part 5
Division. Lubricant Laboratory Technician/Analyst.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Technical Committee for Standardization of Mechanical Vibration, Shock and Condition Monitoring (SAC/TC 53).
This document was drafted by. Wuhan University of Technology, Zhengzhou Machinery Research Institute Co., Ltd., Guangzhou Xuexin Technology Development Co., Ltd., North China
Electric Power University, Rishan Computer Accessories (Jiashan) Co., Ltd., Huadian Electric Power Research Institute Co., Ltd., State Grid Hubei Electric Power Co., Ltd.,
The 60th Research Institute of the General Staff of the People's Liberation Army of China, Kason Technology Co., Ltd., and Shandong Northern Zibo Special Oil Co., Ltd.
The main drafters of this document are. Yuan Chengqing, Ma Weiping, Liang Lifen, Fu Zhongguang, Ding Weiguo, Li Ke, Huang Haizhou, Zhang Daguo, Wu Haidong, Song Jun,
Zhao Zhiyu, Fu Tao, Luo Gang.
Introduction
Using non-intrusive technology to monitor machine status and diagnose faults is a key measure for predictive maintenance in most industrial fields.
Non-invasive techniques, including vibration analysis, acoustic emission, lubricant analysis, thermal imaging, ultrasound, motor current analysis, etc., are all machine status
The extensive and sustained use of these technologies in the manufacturing industry has resulted in a return on investment far exceeding expectations.
The effectiveness of a measurement depends on the skills of the people who carry out the measurement and the analysis of the data.
Practitioners need to have corresponding theoretical and practical knowledge in machine monitoring and diagnosis. The assessment agency has developed training and assessment procedures for practitioners.
Personnel competence procedures.
GB/T 23718 aims to specify the requirements for machine condition monitoring and diagnostic certification bodies, training processes and personnel assessment.
Partial composition.
--Part 1.Requirements for certification bodies and certification processes. The purpose is to specify the requirements for machine condition monitoring, diagnosis and repair technology.
Requirements for certification bodies in various aspects, including general requirements for certification body personnel.
-- Part 2.Vibration Condition Monitoring and Diagnosis. The purpose is to specify the requirements for vibration analysts who implement machine condition monitoring and diagnosis.
General requirements.
-- Part 3.Requirements for training organizations and training processes. The purpose is to specify the requirements for non-intrusive machine condition monitoring, diagnosis and
Requirements for training institutions in restoration technology, including general requirements for personnel in training institutions.
--Part 4.On-site lubricant analysis. The purpose is to specify the machine condition monitoring and diagnostic personnel engaged in on-site lubricant analysis
Qualification and assessment requirements.
-- Part 5.Lubricant laboratory technicians/analysts. The purpose is to specify the equipment used for laboratory lubricant analysis.
Requirements for the qualifications and assessment of condition monitoring and diagnostics personnel.
-- Part 6.Acoustic Emission. The purpose is to specify the qualifications and assessment of personnel for machine condition monitoring and diagnosis using acoustic emission technology.
Require.
-- Part 7.Thermal imaging. The purpose is to specify the qualifications and evaluation of personnel for machine condition monitoring and diagnosis using infrared thermal imaging technology.
Estimated requirements.
-- Part 8.Ultrasound. The purpose is to specify the qualifications and assessment of personnel for machine condition monitoring and diagnosis using ultrasonic technology.
Require.
Machine Condition Monitoring and Diagnosis
Requirements for personnel qualifications and personnel assessment
Part 5.Lubricant laboratory technicians/
Analyst
1 Scope
This document specifies the requirements for the qualification and assessment of personnel engaged in laboratory lubricant analysis for machinery condition monitoring and diagnostics.
The certificate or declaration of conformity in this document will provide personal competence and
Proof of qualification, but not for certain specialist equipment or other specific situations.
This document specifies three levels of personnel qualifications divided by technical scope.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
Table A.3 gives information on the degree of equivalence between national/international standards and ASTM standards for the same subject matter.
ISO 1523 Determination of flash point - Closed cup equilibrium method
Note 1.Technically equivalent to ASTM D3828.
Note 2.GB/T 21775-2008 Determination of flash point - Closed cup equilibrium method (ISO 1523.2002, IDT)
ISO 2592 Determination of flash and fire points - Cleveland open cup method
Cleveland open cup method）
NOTE 1.Technically equivalent to ASTM D92.
Note 2.GB/T 3536-2008 Determination of flash point and fire point of petroleum products - Cleveland open cup method (ISO 2592.2000, MOD)
ISO 2719 Determination of flash point-Pensky ⁃Martens closed cup method
closed cup method）
Note 1.Technically equivalent to ASTM D93.
Note 2.GB/T 261-2021 Determination of flash point Pensky-Martin closed cup method (ISO 2719.2016, MOD)
ISO 2909 Petroleum products - Calculation of viscosity index using kinematic viscosity
index from kinematic viscosity)
Note 1.Technically equivalent to ASTM D2270.
Note 2.GB/T 1995-1998 Calculation method for viscosity index of petroleum products (ASTM D2270-93, EQV)
ISO 3104 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity of transparent and opaque liquids
ucts-Transparent and opaque liquids-Determination of kinematic viscosity and calculation of dynamic
viscosity）
Note 1.Technically equivalent to ASTM D445.
Note 2.GB/T 11137-1989 Determination of kinematic viscosity of dark petroleum products (countercurrent method) and calculation method of dynamic viscosity (refer to ASTM D445-86)
ISO 3679 Determination of flash point - Rapid equilibrium closed cup method
cup method
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23718.5-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 23718.5-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 23718.5-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23718.5-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|